Walker Edison OWTEX User manual

Item #: OWTEX
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 02/2012

Parts List

Hardware List
Phillips head screwdriver required for assembly
(not included)
Small wood screw
Large wood screw
Small bolt
Large bolt
Small screw
Large screw
Latch screw

Assembly Options
Follow Steps 1-17 to assemble the
table. Final assembly will be the table in
its extended form.
The table also has a compact form.
Follow Steps 18-22 for instruction on
how to put the self-contained leaf away.

Secure slat (15) to legs (13,14) using large screws (G). Tighten large screws (G) with wrench (J). Repeat this
step for second set of legs (13,14).
Secure slat (16) to legs (13,14) using large screws (G). Secure supports (17) to legs (13,14) using small
screws (F). Tighten all screws with wrench (J). Repeat this step for second set of legs (13,14).

Secure umbrella supports (19) to slats (18) using large screws (G). Tighten large screws (G) with wrench (J).
Attach slats (18) to slats (16) using large screws (G). Tighten large screws (G) with wrench (J).

Insert slat (6) into slat (5). Repeat this step for second set of slats (5,6).
Secure slat (7) to slats (5,6) using small bolts (E). Tighten small bolts (E) with wrench (J). Repeat this step for
second set of slats (5,6,7).

Secure slat (12) to slats (8,9) using small screws (F). Tighten small screws (F) with wrench (J).
Secure slat (11) to slats (8,9) using small wood screws (A). Tighten small wood screws (A) with a screwdriver.

Construct the inner frame of the table by securing the slat (6) assemblies from Step 6 to slats (8,9,10) using
large screws (G). Tighten large screws (G) with wrench (J).
Carefully slide the leg assembly from Step 4 into place along the inner frame assembly from the previous
step.

Secure supports (17) to the inner frame assembly using small screws (F). Tighten small screws (F) with
wrench (J). Secure each leg to the inner frame assembly using large bolts (C) and sleeve nuts (D). Tighten
large bolts (C) and sleeve nuts (D) onto each other using wrenches (J).
Carefully slide table top sections (1,3) into place.