Walker Edison W48FPCR User manual

Item # : W48FPCR
Assembly Instructions
  
 
Revised 06/14/2018
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reseed. P.1

TWO ASSEMBLY OPTIONS
Option A

 9 
Option B

 9 
。    P.5

Insert the cam bolts (C) and door stopper (F) into the top panel (1) by using screws (G).
Insert the wooden dowel (A) to the bottom panel (2).
Insert the cam bolts (C) to the front panel (10,11,13,15,16). Insert the wooden dowel (B)
to the front panel (10)(11) and wooden dowel (A) to middle panel (5).

Insert the wooden dowel (A) into the side panel (3,4,6,7).
Insert the cam bolts (C) into the side panel (3,4) and front panel (8)(9).
Attach the side panel (3)(4) to the bottom panel (5) and secure it with the cam locks (D).

Attach the bottom panel (2) to the side panel (3)(4) and secure it with screw (H) and
Hex Key (W).
Attach the support slats (12) to the front panel (10)(11) and secure it by using screw (S).

Attach the front panel (10)(11) to the side panel (3)(4) and secure it by using cam locks (D).
Attach the front panel (13)(15)(16) to the bottom panel (2) and middle panel (5) by using
cam locks (D).

Attach the front panel (8)(9) to the side panel (6)(7) and secure it by using cam locks (E).
Attach the side panel (8)(9) to the bottom panel (2) and secure it by using cam locks (D).

Attach the side panel (6)(7) to the bottom panel (2) and secure it by using screw (H) and
Hex Key (W). Insert the back panel (21) into the slot of side panel (6)(7).
Place the top panel (1) on top of the side panel (6)(7), support panel (3)(4) and secure it by
using cam locks (D)(E).

Secure the back panel (14) by using the plastic wedge (T) and screw (U).Put the fireplace
insert (Z) carefully into the stand and secure it by using screw (V).
Use stickers (Y) to cover the cam locks.

Be sure the fire place insert is positioned all the way forward in place.Use screw (AA) to secure
the L-shape bracket (BB) to the side panels (4). Position the adjustable L-bracket to hold the
Fireplace insert in place.
Be sure the fire place insert is positioned all the way forward in place.Use screw (AA) to secure
the L-shape bracket (BB) to the side panels (3). Position the adjustable L-bracket to hold the
Fireplace insert in place.

Insert the shelf support pin (R) into the stand and place the shelf (17)(18) on top.
Insert the plastic pivot (Q) as shown as the diagram.

Attach the door hinge (P)(N) to the glass doors (19)(20) and secure it by using screw (J).

Insert the door hinge (P)(N) into the plastic pivot (Q).
Insert the doors (19)(20) as shown in diagram and secure it with screw (J).

Attach the door hinge (P)(N) to the glass doors (19)(20) and secure it by using screw (J).

Insert the door hinge (P)(N) into the plastic pivot (Q).
Insert the doors (19)(20) as shown in diagram and secure it with screw (J).