Walker Edison W58FP18HB User manual

Item # : W58FP18HB
Assembly Instructions
  
 
Revised 03/2017
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reseed. P.1

Insert the wooden dowel (A) into the support panel (9)(10).
Insert the cam bolt (B) into the top panel (1), face plate (11)(12).
Insert the wooden dowel (A) and cam bolt (B) into the middle panel (2).
Insert the wooden dowel (A) into the skirt (13).

Insert the cam bolt (B) and wooden dowel (A) into the bottom panel (3.). Insert the wooden
dowel (A) into the skirt (14) and support panel (15). Attach the door stopper (F) to the
skirt (13) and secure it by screw (G).
Insert the wooden dowel (A), and cam bolt (B) into the wooden legs (5,6,7,8).
Insert the wooden dowel (A) into the side panel (4).

Use cam lock (C) to attach the wooden legs (5,7) to the side panel (4).
Repeat step #6 for wooden legs (6,8).

Use cam lock (C) to attach the skirt (14) and support leg (16) to the bottom panel (3).
Use cam lock (C) to attach the face plate (11)(12) to the support panel (9)(10).

Attach the side panel (9,10) to the bottom panel (3) and secure it by bolt (H) and
wrench (U).
Turn the middle panel (2) upside down and use cam lock (C) to secure the skirt (13). Use
screws (H) and wrench (U) to attach the support panel (15).

Use cam bolts (C) to secure the middle panel (2) into the support panel (9,10).
Insert the back panel (18) into the slot of the middle (2) and bottom panel (3). Attach the
wooden leg (5,7) to the middle panel (2), bottom panel (3) and skirt (13)(14) and secure it
with cam lock (C).

Repeat step #13 for wooden legs (6,8).
Place the stand up right and place the back panel (17) in the slot in the legs.

Place the top panel (1) on the stand and secure it with the cam locks (C).
Use flat-head screw (T) and plastic wedge (S) to secure the back panel (17)(18).

Use the stickers (W) to cover the cam locks.
Insert the shelf support pin (R) into the stand and place the wooden shelf (19) on top.

Attach the fireplace insert (D) to the stand by securing it with screw (E).
For security, insert the cam bolts (B) into the bottom panel and use cam lock (C) to attach
the support panel (20) to the bottom panel (3).

Attach the door hinge (N) and metal plate (M) to the glass doors and secure it with screw (L).
Attach the door Handle (J) to the doors and secure it with handle bolt (K).
Insert the plastic pivot (Q) into the bottom panel (3) and skirt (13).

Insert the door hinge (P) into the plastic pivot (Q) on the bottom panel (3). Attach the door
hinge (N) to the plastic pivot on skirt (13) and secure the door hinge (P) with screw (L).

Attach the door hinge (N) and metal plate (M) to the glass doors and secure it with screw (L).
Attach the door knob (Y) to the doors and secure it with knob bolt (Z).
Insert the plastic pivot (Q) into the bottom panel (3) and skirt (13).

Insert the door hinge (P) into the plastic pivot (Q) on the bottom panel (3). Attach the door
hinge (N) to the plastic pivot on skirt (13) and secure the door hinge (P) with screw (L).