Walker Edison C38B5 User manual

Item #: C38B5
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 092010

Parts List

Hardware List
The hardware quantities listed above are required for proper assembly. Some
extra hardware may also have been included.

Carefully lay top glass (1) up-side-down on a soft surface. Screw long rods (A) into the plates of top
glass (1). Slide cylinders (5) and decorative rings (C) onto middle long rods (A). Snap decorative rings
(C) onto cylinders (6).
Slide top glass (2) then decorative rings (C) onto middle rods (A). Screw short rod (B) into the open
plate of top glass (2).

Slide cylinder (4) onto right long rod (A). Slide cylinders (5) onto middle long rods (A) and short rod
(B). Slide decorative rings (C) onto all rods (A,B). Snap decorative rings (C) onto cylinders (4,5).
Carefully slide bottom glass (3) then decorative rings (C) onto all rods (A,B).

Screw legs (7) onto all rods (A,B). Ensure that legs (7) fit snuggly into the decorative rings placed in
the previous step.