Walker Edison W58FPBD User manual

8

Attach cam bolts (B) to parts (1) and (2). Insert wooden dowels (A) to part (2).
Attach cam bolts (B) to parts (9) and (18). Insert wooden dowels (A) to parts (8, 10, 19).

Insert wooden dowels (A) into designated areas in parts (3, 4, 5, 6, 7). Attach cam bolts (B)
to parts (3, 4, 5, 6).
Attach parts (3) and (5) to part (7), and then attach cam locks (C) to fully assembled part (7).

Attach parts (4) and (6) to the other part (7), and then insert cam locks (C) to the fully
assembled part (7).
Attach cam locks (C) to parts (13) to panel (2). Attach slat (19) to panel (2) by using screw (W)
as guides.

Attach cam locks (C) to part (8) to connect part (9), and to part (10) to connect to the other
part (9).
Use the wrench (U) to use bolts (D) to connect parts (9) and (10) to part (2).

Use cam bolts (C) to connect parts (3) and (5) to part (2).
Use cam bolts (C) to connect parts (4) and (6) to part (2).

Slide parts (14) into designated area.
Use cam bolts (C) to connect part (18) to part (1).

Use cam bolts to connect part (1) to the designated areas on parts (7), (8), and (10).
Attach the plastic wedges (K) by using the screws (L) onto the corners of parts (14).

Attach doorstopper (P) to designated areas by using screws (Q).
Place sticker (T) in designated areas.

Slide part (15) between parts (7) and (9). Slide part (16) between parts (10) and (7). Attach
shelf support pins (J).
Attach hinges (E) to the doors (11,12) by using screws (F).

Attach handles (G) to the doors (11,12) by using bolts (H). Attach metal part (M) to the
doors (11,12) by using screw (N).
Attach hinges (E) by using screws (F).

Insert fireplace (R) to the front by sliding it through the back of the unit and attach by using
screws (S).
Attach part (17) above part (2) behind the fireplace unit by using cam bolts (C) and bolts (B).

Place stickers (T) in designated areas onto part 17.