Walker Edison BR52DAP6D User manual

Copyright 2022, by Walker Edison Furniture Co., LLC. All rights reserved.
c
Revised 04/2022
Please visit our website for the most current instructions, assembly tips, to report damage
or request parts. www.walkeredison.com
Item #: BR52DAP6D
Assembly Instruction
P.1

P.2
Maintenance Guide
To maintain long term performance and easy gliding of your solid wood drawers,
we recommend applying wax to the wooden guide rails.
1. Bee's wax is recommended or Paraffin wax from a standard candle can be used.
2. Apply the wax by rubbing it on the wooden guide rails where there is wood-on-wood
contact when opening and closing the drawer. (Wax should be room temperature, do
not melt the wax onto the wood).
3. Wax should be applied every few months for the first year and then only when
needed after that to keep the drawers sliding smoothly.

16
13
Part# Description Qty
1 Top panel 01 pcs
2 Right side panel 01 pcs
3 Left side panel 01 pcs
4 Base 01 pcs
5 Bottom back crossbeam 01 pcs
6 Front bottom crossbeam 01 pcs
7 Back panel 02 pcs
8 Right bottom crossbeam 01 pcs
Part# Description
10 Drawer front
11 Drawer left side
12 Drawer right side
13 Drawer bottom
14 Drawer back
Qty
06 pcs
06 pcs
06 pcs
06 pcs
06 pcs
WARNING!
* Use the wall attachment device provided.
* Do not let children climb or hang on drawers, doors or shelves.
* Place the heaviest items in the lower drawers or shelves.
* Do not place Tv’s or other heavy objects on top of this product,
unless it has specifically designed to support them
* Never open more than one drawer at a time.
IN ORDER TO PREVENT OVER TURNING THIS PRODUCT MUST
BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED
Serious or fatal crushing injuries can occur from furniture
tipping over. To help prevent this item of furniture tipping over:
Always ensure the wall to be drilled is free from hidden electrical wires, water
and gas pipes.
An attachment device is provided with your product, however you will need to
source suitable fixings for your wall type. If in doubt, please consult a qualified
trades person
The side drawer with WARNING LABEL,
should be mounted in highest drawer.
12
WARNING!
* Use the wall attachment device provided.
* Do not let children climb or hang on drawers, doors or shelves.
* Place the heaviest items in the lower drawers or shelves.
* Do not place Tv’
s or other heavy objects on top of this product,
unless it has specifically designed to support them
* Never open more than one drawer at a time
.
.
IN ORDER T
O PREVENT OVER TURNING THIS PRODUCT MUST
BE USED WITH THE W
ALL A
TT
ACHMENT DEVICE PROVIDED
Serious or fatal crushing injuries can occur from furniture
tipping over. T
o help prevent this item of furniture tipping over:
Always ensure the wall to be drilled is free from hidden electrical wires, water
and gas pipes.
An attachment device is provided with your product, however you will need to
source suitable fixings for your wall type. If in doubt, please consult a qualified
trades person
1
2
3
4
5
6
7
7
8
18
6x
9
9
10
11
12
14
15
17
17
15 Top rail
16 Division
17 Small top rail
01 pcs
01 pcs
02 pcs
9 Small drawer runner 12 pcs 18 Left bottom crossbeam 01 pcs
P.3

KWall anchor 01 pc
J1276mm “H” Profile 01 pc
LWasher 02 pcs
MØ6mm 01 pc
A
B
C
D
E
F
Ø8*30mm Wooden dowel 83 pcs
24 pcs
Screw 36 pcs
Ø3,5*30mm Screw 75 pcs
Ø3,5*30mm Screw 12 pcs
Ø10*7 Nail 22 pcs
Ø3,5*35mm Screw
G19 pcs
Knob 12 pcs
Ø8*20mm Wooden dowel
Ø4*25mm
Tape measure and hammer
recommended for assembly
(not included)
I
P.4
06 pcs
Felt
Ø40*15mm
H

Step 1 Insert wooden dowel (A) into parts (2), (3), (5), (6), (8), (11), (12), (15), (16), (17) and (18).
Insert wooden dowel (B) into part (9).
15
9
(12x)
17
(2x)
12
(6x)
11
(6x)
6
5
8
18
16
3
2
B
B
A
A
A
AA
A
A
A
A
A
A
A
A
A
A
A
A
A
A
AAAA
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Attach felt (H) into parts (6), (8) and (18).
H
H
P.5
H
H
H
H
B
Qty Qty
AB24
59
Ø 8,0x30 mm Ø 8,0x20 mm
Qty
H06

Step 2
P.6
Step 3 Secure parts (17) to part (1) with screw (G) and screwdriver (not included).
Attach part (1) in the part (15) as shown using screw (G) and screwdriver (not included).
15
1
G
G
G
G
Qty
04
G
Ø 3,5x35 mm
G
(04x)
1
G
G
G
G
17
17
Qty
04
G
Ø 3,5x35 mm
G
(04x)

D
D
DD
D
D
D
D
D
2
3
16
1
Qty
09
D
Ø 3,5x30 mm
D
(09x)
G
(02x)
Step 4 Attach screw (G) into the holes in the part (15) and screwdriver (not included).
15
G
G
P.7
Attach parts (2), (3) and (16) in the part (1) as shown using screw (D) and screwdriver (not included).
Step 5
Qty
02
G
Ø 3,5x35 mm

G
(09x)
Attach part (4) in the parts (2), (3) and (16) as shown using screw (G) and screwdriver (not included).
Attach parts (8) and (18) in the part (6) as shown using screw (D) and screwdriver (not included).
Step 6
Step 7
P.8
4
G
G
G
G
G
G
G
G
G
2
16
3
8
18
6
D
D
D
(02x)
Qty
02
D
Ø 3,5x30 mm
Qty
09
G
Ø 3,5x35 mm

Step 8
Step 9
P.9
D
(08x)
D
(04x)
D
D
D
D
D
DD
D
4
8
18
6
D
D
D
D
5
4
Attach part (5) in the part (4) as shown using screw (D) and screwdriver (not included).
Attach parts (6), (8) and (18) in the part (4) as shown using screw (D) and screwdriver (not included).
Qty
04
D
Ø 3,5x30 mm
Qty
08
D
Ø 3,5x30 mm

Use screw (D) to attach part (5) to part (4) and screwdriver (not included).
Attach parts (9) in the parts (2), (3) and (16) as shown using screw (C) and screwdriver (not included).
Step 10
Step 11
P.10
D
(02x)
D
D
5
9
9
9
9
C
C
C
C
2
16
3
9
9
9
9
9
9
9
9
(36x)
C
9
Qty
02
D
Ø 3,5x30 mm
Qty
36
C
Ø 4,0x25 mm