Walker Edison WQ44CMP User manual

ITEM # : WQ44CMP
Assembly Instructions
  
 
Revised 03/2017
Copyright © 2010, by Walker Edison Furniture Co., LLC. All rights reseed. P.1

Screw cam bolts (B) into stand top (1).
Insert dowels (A) into shelves (9), stand base (2) and drawer divider (4).

Screw cam bolts (B) into drawer pieces (5, 6, 7, 8). Insert dowels (A) into drawer
pieces (5, 6, 7, 8).
Attach feet (10) and stand support (11) to stand base (3) using large bolts (E) and wrench (L).

Screw cam bolts (B) into stand base (3).
Attach panels (5, 6) to panel (2) using cam bolts and dowels as guides. Insert large cam
locks (C) into panel (2) and tighten with a screwdriver.

Attach drawer divider (4) to the assembly from the previous step using dowels as guides.
Slide back panel (13) into the grooves of the assembly.
Attach the assembly from the previous step to stand base (3) using cam bolts and dowels
as guides.

Insert large cam locks (C) into panels (5, 6) and tighten with a screwdriver.
Attach panels (7, 8) to shelf (9) using cam bolts and dowels as guides. Insert large cam
locks (C) into panel (9) and tighten with a screwdriver. Repeat this step for second set of
panels (7, 8, 9).

Attach the first panel (7, 8, 9) assembly to the stand assembly. Ensure that panel (7) faces
forward.Insert large cam locks (C) into panels (7, 8) and tighten with a screwdriver.
Attach the second panel (7, 8, 9) assembly to the stand assembly. Ensure that panel (7)
faces forward. Insert large cam locks (C) into panels (7, 8) and tighten with a screwdriver.

Slide back panel (12) into the grooves of the stand assembly.
Insert large cam locks (C) into the stand assembly. Attach stand top (1) to the stand assembly
using cam bolts and dowels as guides. Tighten large cam locks (C) with a screwdriver.

Cover all visible cam locks with stickers (N) as desired.
Screw cam bolts (B) into drawer fronts (18, 19). Attach handles (G) to drawer fronts (18, 19)
using small bolts (F).

Attach drawer sides (15, 16) to drawer back (14) using large screws (H). Slide drawer
bottom (17) into the grooves of the drawer assembly. Repeat this step for the second drawer .
Attach drawer front (18) to the first drawer assembly using cam bolts as guides. Insert small
cam locks (D) into drawer sides (15, 16) and tighten with a screwdriver.

Attach drawer front (19) to the second drawer assembly using cam bolts as guides. Insert
small cam locks (D) into drawer sides (15, 16) and tighten with a screwdriver.
Carefully slide drawers into the stand assembly.

Secure back panels (12, 13) using plastic wedges (K) and small screws (J).