Walker Edison ORRSC2NL User manual

P.1
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Please visit our website for the most current instructions, assembly tips, report damage,
or request parts. www.walkeredison.com
Revised 06/12/2019 (I)
®
Walker Edison
TM
Assembly Instructions
Item # : ORRSC2NL

P.2
Outdoor Furniture Care / Cleaning Guidelines
I. Wood Products - To maintain the attractive coloring and natural wood
grain of acacia products, we recommend applying teak oil, at the beginning
and the end of each patio season. Teak oil is available at your local hardware
store. We also recommend that acacia products are covered when not in use.
Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.
Our patio furniture is designed to be enjoyed for years to come, and while
many of our products are weather resistant, UV protected, and water
resistant, they still need some care to keep them looking great. Follow
these simple tips to maintain the function and appeal of these products.
II. All-Weather / Metal Products - To keep these products clean and looking
sharp, we recommend washing these products as needed with warm, soapy
water and wipe down with a clean, dry cloth.
III. Cushions - To clean our comfortable cushions, we recommend pulling the
cover off of the cushion and washing on the gentle cycle in your washing
machine. It is also recommended that the cushion covers are air dried.
For additional product information, help assembling a product, or for any other customer
support issue, please contact our customer service team.
Walker Edison Furniture, LLC
4350 West 2100 South, Salt Lake City, UT 84120
Toll Free: 1-877-203-2917
www.walkeredison.com
Monday - Friday 8 am to 5 pm (MST)

P.3
Parts List
2
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
33
4
5
1

P.4
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
M6x35mm BoltA 4 pcs
M6x45mm BoltB 4 pcs
Ø16mm Flat washerC 12 pcs
M4 NutD 4 pcs
Bolt capE 4 pcs
Plastic pad F 4 pcs
Plastic coverG 8 pcs
WrenchH 1 pcs
M4 Hex Key J 1 pcs

P.5
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 1
2
3
3
CAJ
H
A
J
C
DE
CH
C
D
E
Attach part (3) to part (2) using bolt (A) ,flat washer (C) and Nut (D) with hex key (J) and Wrench
(H) ,then place bolt cap (E) on nut (D) as per diagram.
Note : Do not fully tighten all the bolts .

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 2
F
P.6
3
4
5
CB
J
F
CB
F
FC
C
BB
3
Attach parts (4,5) to part (3) using bolt (B) ,Flat washer (C) and Plastic pad (F) with Hex key (J)
as per diagram.
Note: Fully tighten all the bolts .

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 3
P.7
3
3
G
G
G
G
Place Plastic cover (G) as per diagram.

Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 4
P.8
1
2
Put part (1) as per diagram.

Step 5
Final Assembly
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.9