Walker Edison TW485PCXB User manual

Item # : TW485PCXB
Assembly Instructions
跷
®

  
  

Hex Key
Hex Key
Bent washer

Step 1

I


00
。
00
2
2
Copyright©2019, by Walker Edison Furniture Co., LLC. All rights reserved.
P.5
Using bolt(A) connect spring washer (B) and washer (C) to secure top panel (1) to
legs (2) with hex key (H) as per diagram .

Step 2
x4
Copyright©2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.6
Insert dowel (G) into part (3) attach part (3) to part (6) as per diagram.

Step 3
I
I
IL


＼
＼
\\／I/
＼
厂
尸口 
I产
/
3
x4
Copyright©2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.7
Using bolt (D) insert bent washer (E) secure part (3,6) with hex key (J) as per diagram.
Please do not fully tighten the bolts when assemble this step ,otherwise it may be
caused the next step can not be assembled.

Insert dowel (G) into part (4) attach part (4) secure to part (6) as per diagram.

Using bolt (D) insert bent washer (E) into part (4) to part (6) with hex key (J) as per diagram.
Please do not fully tighten the bolts when assemble this step ,otherwise it may be caused the
next step can not be assembled.

Put part (5) into parts (3,4) as per diagram.

Using bolt (D) insert bent washer (E) secure part (3,4,5) with hex key (J) as per diagram.
Please do fully tighten all the bolts .

After full adjustment,secure part (7) to parts (4,5,6) with screw (F) and a Philips Head
screwdriver as per diagram .