Waring BB185 User manual

NuBleNdTM CoMMerCial BleNder
wiTh eleCTroNiC MeMBraNe
liCuadora CoMerCial CoN paNel
de CoNTrol TáCTil NuBleNdTM
Mixeur professioNNel à CoMMaNde
éleCTroNique TaCTile NuBleNdTM
For your safety and continued enjoyment of this product,
always read the instruction book carefully before using.
Para su seguridad y para disfrutar plenamente de este producto,
siempre lea las instrucciones cuidadosamente antes de usarlo.
An que votre appareil vous procure en toute sécurité beaucoup de
satisfaction, lisez toujours soigneusement les directives avant de l’utiliser.
BB185
NSF®
10wc111308_bb185_ib.indd 1 4/7/10 10:59:31 AM

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed including the following:
1. READ ALL INSTRUCTIONS
2. To protect against electrical hazards, do not immerse the
blender base in water or other liquid.
3. This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
4. Children should be supervised to ensure that they do not
play with the appliance.
5. Unplug from outlet when not in use, before putting on or
taking off parts, and before cleaning.
6. Avoid contacting moving parts.
7. Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions or is dropped or
damaged in any manner. Return appliance to the nearest
authorized service facility for examination, repair or
electrical or mechanical adjustment.
8. The use of attachments including canning jars not
recommended by the appliance manufacturer may cause
hazards.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter, or
touch hot surfaces.
11. Keep hands and utensils out of container while blending,
to prevent the possibility of severe personal injury and /or
damage to the blender. A rubber scraper may be used, but
must be used only when the blender is not running.
12. Blades are sharp. Handle carefully.
10wc111308_bb185_ib.indd 2 4/7/10 10:59:31 AM

13. Your blender utilizes a removable jar base and blade
assembly; to avoid injury, never place cutting assembly
or cutting blades on base without container properly
attached.
14. Always operate blender with cover in place.
15. When blending hot liquids, remove centerpiece of two-
piece cover. See Hot Blending Instructions.
SAVE THESE INSTRUCTIONS
RESETTING THERMAL PROTECTION
• TheBlenderyouhavepurchasedisequippedwithan
Automatic Reset Switch to protect the motor from
overheating.
• Ifyourblenderstopsrunningunderheavyuse,turnthe
Power Switch “Off” and Unplug the Power Cord. Empty the
blender container of all its contents and allow approximately
5 minutes for the motor to cool down.
• PlugthepowerCordbackintotheoutletandcontinue
blending.
• Ifyourblenderdoesnotfunctionproperlyfollowingthis
procedure, discontinue use and contact a Certied Waring
Customer Service Center.
10wc111308_bb185_ib.indd 3 4/7/10 10:59:31 AM

BLENDER
ONE QUART CAPACITy SPECIFICATIONS
•Ratings 120VAC-50/60Hz-singlephase
•Motors Permanentlylubricatedseries-wound
universal type
•Container 44oz.Polycarbonateor32oz.StainlessSteel
•Cord 6foot18gaugethreeconductorgrounding
cord with strain relief
•cETLu s listed 120Voltmodels
GROUNDING INSTRUCTIONS
•Foryourprotection,Waring®Commercial Blenders are
equipped with a 3-conductor cord set.
•120voltunitsaresuppliedwithamolded3-pronggrounding
type plug and should be used in combination with a properly
connected grounding-type outlet, as show in Figure A.
If a grounding type outlet is not available, an adapter, shown in
Figure B, may be obtained to enable a 2-slot wall outlet to be
used with a 3-prong plug.
Referring to Figure C, the adapter must be grounded by
attaching its grounding lug under the screw of the outlet cover
plate.
CAUTION: Before using an adapter, it must be determined that
the outlet cover plate screw is properly grounded. If in doubt,
consult a licensed electrician.
Never use an adapter unless you are sure it is properly
grounded.
NOTE: Use of an adapter is not permitted in Canada.
10wc111308_bb185_ib.indd 4 4/7/10 10:59:31 AM

OPERATION
1. Put ingredients into container and cover it. Always add
liquid ingredients rst, unless otherwise specied in recipe.
DonotllaboveMAXline.
2. Place container on blender. Be sure container is fully
seated and that the drive coupling is properly engaged.
3. Plug the blender cord into outlet.
4. Press ON/OFF button.
Green LED will illuminate.
5. This blender has 2 speed settings:
HIGH and LOW .
Press desired button.
To crush ice, use HIGH speed
setting.
6. This blender is equipped with
a PULSE option. Press button to engage PULSE
function. Unit will run on HIGH speed until the button
is released.
7. When nished processing, press ON/OFF button.
8. Allow motor to come to a complete stop before removing
container from blender.
9. Note: Containers with removable bottoms have right-
handed threads. When reassembling, be sure rubber seal
is positioned between the
container and the ange of
the blade assembly.
10. Safety Feature: If a power
outage occurs, blender will
turn off. Once the power
returns, the blender will be
in its OFF position. To turn
unit back on, press the
ON/OFF button, and then
the desired speed.
Rubber Seal
®
10wc111308_bb185_ib.indd 5 4/7/10 10:59:32 AM

IMPORTANT
HOT BLENDING INSTRUCTIONS
To minimize the possibility of being scalded when blending hot
materials, the following precautions and procedures must be
observed.
1. Limit the amount of materials processed to 1/2 pint.
2. Completely remove the center portion of the two-piece
container lid before starting motor. (This will allow venting
of the rapidly heated and expanding air present inside the
container when blender is running.)
3. Always start blending at lowest speed setting, and then
progress to desired speed.
4. Never stand directly over blender when it is being started
or while it is running.
SERVICE
Refer to the list of Authorized Service Centers enclosed with
your Waring®Commercial Blender for the name of the nearest
Service Center, or write to:
Waring Factory Service Center
P.O Box 3201
314 Ella T. Grasso Avenue
Torrington, CT 06790
[phone]
Ship blenders for repair to the above address or to an
Authorized Service Center. Do not ship to a Waring Sales
Ofce.
Note: If your application involves the processing of biologically
active material, we request that any items returned for service
be sterilized before being shipped. Such items must be clearly
identied as having been sterilized, both by a tag on the item
itself and by a statement in the accompanying correspondence.
Waring will not accept delivery of any return unless it is so
identied.
Replacement parts for your “Out of Warranty” repairs are
obtainable at the above address.
10wc111308_bb185_ib.indd 6 4/7/10 10:59:33 AM

PG-4464
LIMITED TwO yEAR wARRANTy
Waring warrants every new Waring Commercial Blender to be
free from defects in material and workmanship for a period of
two years from the date of purchase when used with foodstuffs,
nonabrasive liquids (other than detergents) and nonabrasive
semi-liquids, provided it has not been subject to loads in excess
of the indicated rating. In addition, the motor in this appliance
has a full two year warranty.
Under this warranty, the Waring Commercial Division will repair
or replace any part which, upon our examination, is defective
in materials or workmanship, provided the product is delivered
prepaid to the Waring Service Center at: 314 Ella T. Grasso Ave.
Torrington, CT 06790, or any Factory Approved Service Center.
This warranty does not: a) apply to any product which has
become worn, defective, damaged or broken due to use or
due to repairs or servicing by other than the Waring Service
Center or a Factory Approved Service Center, or due to abuse,
misuse, overloading or tampering; or b) cover incidental or
consequential damages of any kind.
The two year warranty is applicable only to appliances used in
the United States or Canada; this supersedes all other express
product warranty or warranty statements. For Waring products
sold outside of the U.S. and Canada, the warranty is the
responsibility of the local importer or distributor. This warranty
may vary according to local regulations.
Warning: This warranty is void if appliance is used on Direct
Current (D.C.)
  WARINGCOMMERCIAL
314 Ella T. Grasso Ave.
Torrington, CT 06790
10wc111308_bb185_ib.indd 7 4/7/10 10:59:33 AM

MEDIDAS DE SEGURIDAD
IMPORTANTES
Siempre que use aparatos eléctricos, debe tomar precauciones
básicas de seguridad, entre las cuales las siguientes:
1. LEA TODAS LAS INSTRUCCIONES.
2. Para reducir el riesgo de electrocución, no sumerja el
aparato en agua u otro líquido.
3. Los niños o las personas que carezcan de los
conocimientos o la experiencia necesarios para manipular
el aparato, o aquellas cuyas capacidades físicas,
sensoriales o mentales estén limitadas, no deben utilizar
el aparato sin la supervisión o la dirección de una persona
responsable por su seguridad.
4. Asegúrese que los niños no jueguen con este aparato.
5. Desconecte el aparato cuando no esté en uso, antes de
instalar o remover piezas y antes de limpiarlo.
6. Evite el contacto con las partes móviles.
7. No opere este aparato si el cordón o la clavija estuviesen
dañados, después de que hubiese funcionado mal o
que se hubiese caído o si estuviese dañado. Regrese
el aparato a un centro de servicio autorizado para su
revisión, reparación o ajuste.
8. El uso de accesorios no recomendados por el fabricante,
incluso frascos para conservas, presenta un peligro.
9. No lo utilice en exteriores.
10. No permita que el cordón cuelgue del borde de la
encimera o de la mesa, ni que entre en contacto con
supercies calientes.
11. Para reducir el riesgo de herida seria o de daño al aparato,
mantenga las manos y los utensilios fuera de la jarra
durante el funcionamiento. Se podrá usar una espátula de
goma, siempre en cuando el aparato esté apagado.
10wc111308_bb185_ib.indd 8 4/7/10 10:59:33 AM

12. Lascuchillassonmuylosas.Manipúlelasconsumo
cuidado.
13. La jarra y el juego de cuchillas son desmontables. Para
su seguridad, nunca instale el juego de cuchillas por
sí solas sobre la base. El juego de cuchillas siempre
debe encontrarse adentro de la jarra, la cual debe ser
debidamente instalada sobre la base del aparato.
14. No encienda el aparato a menos que la tapa esté
debidamente puesta.
15. Para licuar líquidos calientes, quite la parte central (el
tapón) de la tapa. Consulte la sección "Líquidos calientes".
GUARDE ESTAS
INSTRUCCIONES
DISPOSITIVO DE PROTECCIóN DEL MOTOR
• Suaparatoestádotadodeundispositivodeprotección
térmica que apaga automáticamente el motor en caso de
recalentamiento.
• Siestoocurriera,apagueydesenchufeelaparato.Vacíela
jarra y permita que el aparato enfríe durante
aproximadamente 5 minutos.
• Cuandoelmotorestéfrío,vuelvaaconectarelaparatoy
siga licuando.
• Sielaparatonofuncionaradebidamentedespuésseguir
estos pasos, deje de usarlo y comuníquese con un centro
de servicio autorizado.
10wc111308_bb185_ib.indd 9 4/7/10 10:59:33 AM

LICUADORA
ESPECIFICACIONES TÉCNICAS
•Suministroeléctrico:120VCA-50/60Hz-monofásico
•Motorlubricadodeporvida,detipouniversal
•Jarradepolicarbonatode1.3Lodeaceroinoxidablede1L
•Cablede1.85m,decalibre18,conclavijadetierrareforzada
•cETLu s (modelosde120V)
INSTRUCCIONES DE PUESTA A TIERRA
•Parasuprotección,esteaparatoestáequipadoconuncable
de puesta a tierra.
•Losaparatosde120Vestánequipadosconclavijadetierra,
la cual debe ser conectada a un tomacorriente debidamente
puesto a tierra (Fig. A).
Si un tomacorriente puesto a tierra no está disponible, se podrá
usar un adaptador para conectar el aparato a un tomacorriente
polarizado (Fig. B).
El adaptador debe ser puesto a tierra mediante un tornillo de
metal que conecte la lengüeta del adaptador a la placa del
tomacorriente (Fig. C).
PRECAUCIÓN: Antes de conectar el adaptador, asegúrese
que el tomacorriente esté puesto a tierra. Si no está seguro,
comuníquese con un electricista.
Nunca use un adaptador sin estar seguro de que el
tomacorriente esté puesto a tierra.
NOTA: Está prohibido usar un adaptador en el Canadá.
10wc111308_bb185_ib.indd 10 4/7/10 10:59:33 AM