OPERATING INSTRUCTIONS
1. When placing the container on the unit base, make sure
that the unit is turned “OFF” and is at a complete stop.
Do not place the container on the base, or take it off
while the unit is running. If you do so, it may damage
the drive shaft or blade assembly. For best results, do
not fill container above 3 cup level.
2. Be sure the switch is in the “OFF” position and plug the
blender into a convenient outlet.
3. The Waring Blender is ideal for blending ice drinks.
A hint to help mix ice drinks: keep the blades in the
container covered with liquid, turn the unit on, remove
the lid insert on top of the jar lid, and feed the ice cubes
slowly into the jar. NOTE: Never use containers other
than Waring®Blender containers with your Waring unit.
4. Put ingredients into container and put on cover. Always
add liquid ingredients first, unless otherwise specified in
recipe. Always hold container with one hand while
blending.
HOW TO CLEAN CONTAINERS WITH
NONREMOVABLE BLADES
1. Remove the container from the unit base. Remove the
lid. Add a cup of cleaning solution, made by adding a
few drops of dishwashing detergent to 1 cup of cool
water, to the container. Scrub and flush out the interior
of the container and the lid, to dislodge and remove as
much residue as possible. Empty the container.
2. Add more cleaning solution. Put lid on container, place
it on unit base, and run on high speed for two minutes.
3. Empty the container and repeat as above, using clean
rinse water in place of cleaning solution. Empty, rinse,
and dry, prior to storing unit.
4. Wash and rinse container prior to initial use, and
immediately after each use.
4
