Watchguard AP225W User manual

Quick Start Guide
WatchGuard®AP
AP225W
HW Model: W-118
Mounting Bracket
2x 2x 2x 2x
(客戶):Watchguard
(材質):50# 白色特多龍
(空白LABEL 料號):50900006072D
(顏色):BLACK
(上光方式):NO
(尺寸):32x18mm
(公差):+-0.5mm
2:1
SN:22APXXXXX-XXXX
Ethernet MAC Addr: 00:01:21:XX:XX:XX
00:01:21:XX:XX:XX
請使用客戶提供的Excel:
S/N:內容由客戶提供 條碼高度:4.5MM CODE 39
文字顯示為:SN: 22APXXXXX-XXXX
條碼顯示為:22APXXXXXXXXX
條碼顯示為:000121XXXXXX
請使用客戶提供的Excel
ACTIVATE YOUR AP
GO TO:
watchguard.com/activate
INSTALL THE MOUNTING BRACKET
Type 2
OR
Type 3
CONNECT THE AP
MOUNT THE AP
Type 4
Align slots and
slide AP onto bracket
4
3
2
1
Type 1 Type 2 Type 3 Type 4
Type 1

ADDRESS: 505 Fifth Avenue South, Suite 500, Seattle, WA 98104
U.S. SALES: 1.800.734.9905 • INTERNATIONAL SALES: +1.206.613.0895
WEB: www.watchguard.com
© 2020 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard Logo, Fireware,
and LiveSecurity are registered trademarks of WatchGuard Technologies, Inc. in the United States and/or
other countries. All other trademarks and tradenames are the property of their respective owners.
P.N. 352-4225-001 Rev B 022420
1.877.232.3531
(U.S. and Canada)
WATCHGUARD TECHNICAL SUPPORT
+1.206.613.0456
(all other countries)
www.watchguard.com/support
REAR PANEL
BOTTOM PANEL
PASS-THROUGH
POE In
LAN/Uplink
Power
O: Powered o
Green: Powered on
Flashing: Cannot connect to Wi-Fi Cloud or controller
Flashing: No IP address received from DHCP
2.4GHz, 5GHz, and Third Radio
O: Wireless radio inactive
Green: Wireless radio active
Uplink LAN/PoE IN
O: No Ethernet link
Green: Connected to the network
LAN Interfaces
O: LAN interface disabled
Green: LAN interface enabled
CHECK AP STATUS
NOTICES:
All WatchGuard products are designed and tested to meet strict safety requirements. These requirements
include product safety approvals and other global compliance standards. Please read these instructions
carefully before operating the product, and refer to them as needed to ensure the continued safe
operation of your product.
Additional information, including a full list of safety approvals, global compliance standards, and
certications can be found in the Hardware Guide for this device located on the WatchGuard website:
https://www.watchguard.com/wgrd-help/documentation/hardware-guides
For patent information, please visit http://www.watchguard.com/patents
Safety Warning
If protective earthing is used as a safeguard, the instructions shall require connection of the equipment
protective earthing conductor to the installation protective earthing conductor (for example, by means of
a power cord connected to a socket-outlet with earthing connection). To meet safety and electromagnetic
interference (EMI) requirements, you must make sure the power source is connected to earth ground
before you connect power to the AP.
Power Adapter Requirements
This product is intended to be supplied by a Listed Power Adapter or DC power source marked “L.P.S.” (or
Limited Power Source or PS2) rated 12V DC, 2A minimum, maximum ambient temperature (Tma)=40°C,
or supplied by a Listed PoE Adapter marked “L.P.S.” (or Limited Power Source or PS2) rated 54V DC, 0.6A
minimum, maximum ambient temperature (Tma)=40°C. For more information regarding approved power
sources, please contact WatchGuard Technologies.
POWER REQUIREMENTS
• PoE 802.3af/at (54V DC, 0.6A)
• Optional DC power adapter (12V, 2A)
The AP must be connected to PoE+ (802.3at) or DC power to enable
power on the LAN3/PoE Out port.
CONFIGURE THE AP
6
Manage APs with
WatchGuard Wi-Fi Cloud
Manage APs with your
WatchGuard Firebox
(Fireware v12.5.3 or higher)
GO TO:
watchguard.com/start
Declaration of Conformity
WatchGuard Technologies Inc. hereby declares that the product(s) listed below conform to the
European Union directives and standards identified in this declaration.
Product (s):
802.11 a/b/g/n/ac Access Point, W-118
EU Directive(s):
Low Voltage (2014/35/EU)
Electromagnetic Compatibility (2014/30/EU)
Energy-related Products (2009/125/EC)
RoHS (2011/65/EU and 2015/863/EU RoHS)
WEEE Directive 2012/19/EU
The Radio Equipment Directive (2014/53/EU)
Common Standard(s):
EN 60950-1:2006+A11+A1+A12+A2:2013 Safety for ITE
EN 55024:2010
Immunity for ITE
EN 55032:2015/AC:2016
EN 62311:2008
EN 61000-3-2:2014 Harmonics
EN 61000-3-3:2013 Flicker
Wireless Standard(s):
EN 301 489-01 v2.1.1 EMC and Radio Spectrum Matters
EN 301 489-17 v3.1.1 EMC and Radio Spectrum Matters
EN 300 328 v2.1.1 Radio Spectrum Matters
EN 301 893 v2.1.1 Broadband Radio Access Networks
This device complies with Directive 2014/53/EU issued by the Commission of the European Community.
Manufacturer / Hersteller: WatchGuard Technologies
505 5th Ave S. Suite 500, Seattle, WA 98104 USA Radio
Equipment / Funkanlage: 802.11 a/b/g/n/ac Access Point
Type Designation / Typenbezeichnung: W-118
Specifications / Technische Daten: 802.11a,b,g,n,ac (2.4Ghz & 5GHz)
Intended Purpose / Verwendungszweck: Indoor access point
Equipment Class / Betriebsmittel der Klasse: Class II
Operating temperature 0° C to 40° C
The above device complies with the essential requirements and other relevant provisions to Directive
2014/53/EU when used for its intended purpose. This equipment may be operated in the USA, Canada, & Europe Union.
Warning! This is a Class B product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Frequency range (MHz)
Max. Transmit Power (W)
Bluetooth
0.00794
WLAN Wi-FI 802.11x; 2, 4 GHz
0.09977
WLAN Wi-FI 802.11x; 5 GHz
0.19907
Restrictions: France (i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les
mêmes canaux; (ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont
désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que
ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
Die oben genannten Gerät entspricht den grundlegenden Anforderungen und anderen relevanten Bestimmungen der
Richtlinie 2014/53/EU, wenn für den vorgesehenen Zweck verwendet werden. Dieses Gerät ist für die Verwendung in den
USA, Kanada, and Europäische Union.
Warnung! Dies ist eine Einrichtung der Klasse B. Diese Einrichtung kann im Wohnbereich Funkstörungen verursachen. In
diesem Fall kann vom Betreiber verlangt werden, angemessene Maßnahmen durchzuführen
Einschränkungen: Frankreich –(i)-Geräte, die im Band 5150-5250 MHz ist nur für den Innenbereich, um das Risiko von
Störungen des mobilen Satelliten-Systeme, die die gleichen Kanäle (ii) Darüber hinaus reduzieren vorbehalten, sollten
Benutzer auch darauf hingewiesen werden, dass die Nutzer von Hochleistungs-Radare bezeichnet werden primäre Benutzer
(dh d. sie haben Priorität) der Bänder 5 250-5 350 MHz und 5 650-5 850 MHz und dass diese Radargeräte können
Störungen und / oder Schäden an LE-LAN-Geräten verursachen.
Signature
Full Name: Laurence Huang
Position:
Manufacturing Program Manager Date: Nov 16, 2019
LAN3
PoE Out
Pass-
Through
DC IN LAN2 LAN1 Reset
5
Power Options
WG8602 (AU), WG8601 (UK), WG8600 (EU), WG8599 (US) WatchGuard 802.3at PoE+ Injector with AC cord
WG9009 12V Power Adapter for WatchGuard AP225W