EASY START-UP WIZARD
ENHANCED CVI
When first booting up the DVR, Password change Wizard will
initiate. Put the old password "1234" and create a new password.
Click "OK" to continue.
NOTE: Please remember and store your password, manufaturer will not
be responsible for lost paswords.
Cancel to exit and keep the old password.
Use the mouse to navigate thru the setup
Login
Systems Default
Username: admin
Password: 1234
Step
1
System Settings
Click “Date & Time” tab to adjust the Date & Time.
Click "Save" and then click “Apply” to move to the next step.
Click “General” tab and then click “Next Step”.
Step
2
Save Date & Time
adjustments
Step
3
Set Recording Schedule
user can choose what the DVR records. Normal, Alarm,
Motion or all events
By default all DVRs are set to record motion detection 24/7
Camera Number
Hours of the day
Days of the week
Now the system is setup
and ready for recording.
QUICK TIPS
Network
Change the default network to match the local network. Ask the network
administrator for the proper IP address, Gateway and Mask.
Step
4
1. To switch between monitor resolution 720p/1080p press and hold Shift Key
on front panel for 5 seconds.
2. XVI PTZ Cameras work on coax cable or UTP for zoom/focus and pan/tilt control
75 Ohms
Click Next Step & Close the Wizard.
