WatchNet XVI Instruction Manual

LAN / WAN
Free DDNS
www.dvrid.com
Power
12V
QUICK CONNECTION GUIDE
Package Contents:
Cameras Software CD (X1) Quick Start Guide (X2) Mouse (X1) Remote Control (X1)
Power Adaptor (X1) Ethernet Cable (X1) Power Cable (X1) Mouse Pad (X1)
g
KIT dependent
Note:
EVI Series DVRs use RG59 cables up to 300m. Compatable with most UTP baluns.
Cable distance is dependent on cable quality.
©
WatchNET Products are subject to continuous changes and
improvements, information on this document is subjected to
change without prior notice.
2015 WatchNET Inc. All Rights Reserved
DVR (X1)
Camera power supplies and cable not included.
12V 500mA Power Supply required per camera.
Connecting Your EVI DVR
110V AC / 240V AC
XVi MegaPixel Cameras
12 Volts Power
Microphone*
Speaker*
Strobe lamp*
Smart Phone*
USB Mouse
Power
ON/OFF
720P/1080P VGA*
Simultaneous Display
720P/1080P HDMI*
Simultaneous Display
* Not included/sold separately.
Router* IE/Client for Windows or MAC Client for OSX
www.watchnetinc.com
ENHANCED CVI

EASY START-UP WIZARD
When first booting up the DVR, Password change Wizard will
initiate. Put the old password "1234" and create a new password.
Click "OK" to continue.
NOTE: Please remember and store your password, manufaturer will not
be responsible for lost paswords.
Cancel to exit and keep the old password.
Use the mouse to navigate thru the setup
Login
Systems Default
Username: admin
Password: 1234
Step
1
System Settings
Adjust the time and date. Click "Save" before moving to the next step.
Step
2
Save Date & Time
adjustments
Network
Change the default network to match the local network. Ask the network
administrator for the proper IP address, Gateway and Mask.
Click Next Step when done
Step
3
Step
4
Set Recording Schedule
user can choose what the DVR records. Normal, Alarm, Motion or all events
By default all DVRs are set to record motion detection 24/7
Recording
Color Codes
Click Next Step & Close the Wizard.
Camera Number
Hours of the day
Days of the week
Now the system is setup
and ready for recording.
QUICK TIPS
1. To switch between monitor resolution 720p/1080p press and hold Shift Key
on front panel for 5 seconds.
2. XVI PTZ Cameras work on coax cable or UTP for zoom/focus and pan/tilt control
75 Ohms
ENHANCED CVI