Waterpik Water Flosser WP-560 User manual

This device is only compatible with voltages of 100-240VAC, 50/60Hz ©2019 Water Pik, Inc.
Unit Prep
1
Cordless Advanced 500 Series
QUICK START GUIDE
A. Charge unit for 4 hours
by placing the magnetic
charger on the front of
the unit.
B. Insert tip until it clicks
into place. To remove tip,
push the tip eject button.
C. Lift the flip top on
reservoir and fill with warm
water. Refill as needed.
Insert
Magnetic
Attachment
Caution:
Do not press
tip eject
button while
unit is running.
Fill

TO AVOID MESS: KEEP TIP IN MOUTH WHILE UNIT IS ON.
FN 20026590-F AA
MODE
HIGH
LOW
MEDIUM
Water Floss
2
Cordless Advanced 500 Series
QUICK START GUIDE
A. Lean over sink. Place
tip in mouth. Close lips
enough to prevent
splashing. Turn power
ON. Press Mode button
to adjust pressure.
B. Start on low pressure and
increase to your liking. Keep
unit upright during use to
ensure continuous water flow.
C. Aim water at the gumline
at a 90 degree angle. Follow
the gumline and pause briefly
between teeth.
Mode