wattstopper RT-200 User manual

Installation Instructions
Please read all instructions before installing
DESCRIPTION AND OPERATION
The RT-200 is an astronomic time clock that controls the connected light or fan
either manually or through user programmed times.
Upon installation the user enters the correct longitude/latitude coordinates,
date, and local time. (See SETUP.) This ensures that once the schedules are
programmed, the load turns ON/OFF at the correct local times.
Lighted Switch
To help locate the switch button in a dark room, an amber LED illuminates the
ON/OFF button while the controlled load is OFF. When the load is ON, the LED is
OFF.
INSTALLATION & WIRING
WARNING
Disconnect power at the circuit breaker
before installing this product.
1. Prepare the switch box
After the power is turned OFF at
the circuit breaker box, remove
the existing wall plate and
mounting screws. Pull the old
switch from the wall box.
2. Identify the type of circuit
In a single pole circuit, two single
wires connect to two screws on
the existing switch. A ground
wire may also be present and
connected to a ground terminal
on the old switch. A neutral wire
should also be present in the
wall box.
SPECIFICATIONS
Voltage…………………….. ....................................................... 120VAC, 60Hz
Load (Single Pole)
@120VAC…………. .........................0-800W tungsten or ballast, 1/6HP
Environment……………….................................................. Indoor Use Only
Operating Temperature…… ......................32˚ to 131˚ F (0˚ to 50˚ C)
Humidity…………………................................. 95% RH, non-condensing
Tools Needed
Insulated Screwdriver
Wire Strippers
ONLINE LONGITUDE/LATITUDE
LOCATOR TOOL - GO TO
www.wattstopper.com/RT-200
Santa Clara, CA 95050
www.wattstopper.com
RT-200
Astronomical
Time Switch
TOP
INDOOR USE ONLY
Green
>
GROUND
Terminal
Black
>
HOT (power
from circuit box)
Red
>
LOAD (power
to lamp or fan)
White
>
NEUTRAL
Industry standard
switch cover plate
(not provided)

WARNING
Only connect the RT-200 to a Single Pole Circuit.
The RT-200 is not suitable for 3-way switching.
If the existing wiring does not match the description for a Single
Pole Circuit, you should consult with a qualified electrician.
3. Prepare the wires.
Tag the wires currently connected to the existing switch,
so that they can be identified later. Disconnect the wires.
Make sure the insulation is stripped off the wires to
expose their copper cores to the length indicated by the
“Strip Gage” (approximately ½ inch).
4. Wire the time switch.
Twist the existing wires together with the wire leads on the RT-200 as indicated
in the table below. Cap them securely using the wire nuts provided.
Power wire from the circuit (hot) to Black wire on RT-200
Power wire from the lamp or fan (load) to Red wire on RT-200
Neutral wires from the circuit to White wire on RT-200
Ground wire from the circuit to Ground terminal on RT-200
5. Put the RT-200 in the wall box with the display
positioned above the ON/OFF button.
Secure it to the wall box with the screws provided.
6. Install cover plates.
Install industry standard decorator wall switch
cover plate (not included).
7. Restore power to the circuit.
Turn on the breaker or replace the fuse.
SETUP
To access the programming buttons, place your finger
or screwdriver behind the lip at the top of the ON/
OFF button and pull it toward you. Slide the ON/OFF
button down over the wallplate.
Buttons
The three programming buttons are used to set up
the astronomic time switch according to the user’s
preferences and location.
RT-200 Menu Options
From the standard display,
known as the “MAIN PAGE”
press and release the ↑
button to enter SETUP menu.
Press the ↓ button to
move to desired SETUP
menu option.
When the option that
you want to program is
highlighted, press the
CENTER button.
SETUP
SET TIME AND DATE
LOCATION
PREFERENCES
SCHEDULING
MAIN PAGE
DST
PM
Tue 03/31/2009
12:04
PROG
SETUP
SET TIME AND DATE
LOCATION
PREFERENCES
SCHEDULING
MAIN PAGE
Once in the SETUP menu if there is no activity for 10 minutes, the unit
automatically exits out to the MAIN PAGE.
Call 800.879.8585 for Technical Support
Strip Gage
1/2"
12.7 mm
Menu/Raise 
Center Button
Select/Save
Slide Down
ON/OFF
Button
Display
Lower
Button

Save/
Select

SET TIME AND DATE MENU
Within the SET TIME AND DATE menu you will enter the correct time, date and
Daylight Savings Time (DST) start and end days. The unit is shipped with the
correct DST start and end dates already programmed.
Setting Steps
TIME
Hour 1. From the SETUP menu highlight SET TIME AND
DATE and press the CENTER button. TIME should be
highlighted.
Press the CENTER button to highlight hour.
2. Press the ↓ button to decrease hour or the ↑ button
to increase hour.
3. Press the CENTER button to save hour setting and
move highlighted cursor to minute.
Minute Follow step 2 above.
Press the CENTER button to save time setting.
DATE 1. Press the ↓ button to highlight DATE.
Month 1. Press the CENTER button to highlight month.
2. Press the ↓ button to decrease the month or the ↑
button to increase the month.
3. Press the CENTER button to save month setting and
move highlighted cursor to day.
Day Follow step 2 above.
Press the CENTER button to save day setting and move
highlighted cursor to year.
Year Follow step 2 above.
Press the CENTER button to save year setting.
DAYLIGHT
SAVINGS TIME
(DST)
Factory Default Setting: DST ENABLED (The unit will
automatically adjust for Daylight Savings Time). Press
the ↓ button to highlight DST
DST
When enabled,
DST appears in
the upper right
corner of the
MAIN PAGE.
1. Press the CENTER button to highlight ENABLED.
2. Press the ↑ button to switch between ENABLED and
DISABLED.
3. Press the CENTER button to save DST setting.
Start - Week
(Input week when
DST starts)
1. Press the ↓ button to highlight START. Press the
CENTER button to highlight 1st.
2. Press the ↓ button to decrease the week of the
month or the ↑ button to increase the week of the
month.
3. Press the CENTER button to save the week and move
highlighted cursor to the month.
Start – Month
(Input month
when DST starts)
Follow step 2 above.
Press the CENTER button to save month.
End – Week Press the ↓ to highlight End. Follow same steps for
Start – Week.
End – Month Follow same steps for START - Month.
To exit SET TIME AND DATE menu, press the ↓ button to highlight PREVIOUS
menu. Press the CENTER button to select and return to the SETUP menu.
www.wattstopper.com

LOCATION MENU
Within the LOCATION menu you will be required to enter the local longitude/
latitude coordinates and time zone. If you do not know this information, we have
included a list of the major US cities or go to our website for a more detailed list
at www.wattstopper.com/RT-200.
Setting Steps
TIME ZONE 1. From the SETUP menu highlight LOCATION and press
the CENTER button. TIME ZONE should be highlighted.
Press the CENTER button to select the time zone.
2. Press the ↓ button to decrease the time zone.
Press the ↑ button to increase the time zone.
3. Press the CENTER button to save time zone setting.
LONGITUDE 1. Press the ↓ button to highlight LONGITUDE. Press the
CENTER button to select the longitude
Follow step 2 above.
Press the CENTER button to save longitude setting.
LATITUDE 1. Press the ↓ button to highlight LATITUDE. Press the
CENTER button to select the latitude.
Follow Step 2 above.
Press the CENTER button to save latitude setting.
To exit the LOCATION menu, press the ↓ button to highlight PREVIOUS MENU.
Press the CENTER button to select and return to the SETUP menu. Once the
location information is entered, return to the MAIN PAGE and press the left
button. This will display the sunrise and sunset times. Use this as a check to
validate that the location information has been entered in correctly.
PREFERENCES
The PREFERENCES menu allows the user to customize the unit’s features
including the time/date format, sound and flash.
Time format – choose between a 12-hour or 24-hour format
Date format – choose between MM/DD/YY or DD-MM-YY
Sound – When SOUND is enabled the RT-200 will beep every 5 seconds when the
load is going to be turned OFF in less than a minute. It will also beep each time
the user presses the ↑, the CENTER, or the ↓ button. A small ear icon will
appear on the MAIN PAGE when sound is enabled.
Flash – When FLASH is enabled the RT-200 turns OFF the load for 1 second and
then turns it back ON to warn the user that the load is turning OFF in 1 minute.
When flash is enabled, a lightening bolt icon will appear on the MAIN PAGE.
Setting Steps
TIME FORMAT 1. From the SETUP menu highlight PREFERENCES
and press the CENTER button. TIME FMT should be
highlighted.
Press the CENTER button to select time format.
2. Press ↑ button to change format.
3. Press the CENTER button to save time format setting
and to move highlighted cursor back to TIME FMT.
DATE FORMAT 1. Press the ↓ button to highlight DATE FMT. Press the
CENTER button to select date format.
Follow step 2 above.
Press the CENTER button to save date format.
SOUND
1. Press the ↓ button to highlight SOUND. Press the
CENTER button to select the sound setting.
Follow step 2 above to enable or disable sound.
Press the CENTER button to save setting.
FLASH 1. Press the ↓ button to highlight FLASH. Press the
CENTER button to select the flash setting.
Follow step 2 above to enable or disable flash.
Press the CENTER button to save setting.
To exit the PREFERENCES menu, press the ↓ button to highlight PREVIOUS
MENU. Press the CENTER button to select and return to the SETUP menu.
Call 800.879.8585 for Technical Support

SCHEDULING
The RT-200 has 8 programs allowing the user flexibility in setting schedules to
turn the connected load ON/OFF.
Setting Steps
PROGRAM 1. From the SETUP menu highlight SCHEDULING and
press the CENTER button. PROGRAM should be
highlighted.
Press the CENTER button to select program #.
2. Press the ↓ button to decrease the program and
the ↑ button to increase the program #.
3. Press the CENTER button to save the program #.
Day(s) - Set the
days of the week
the lights will
turn ON for that
particular program
1. Press the ↓ button to highlight DAY(s). Press
the CENTER button to select the days when the
program will operate.
2. Press the ↑ to choose the day(s); choices include:
- None (program is not in use).
- All (program turns ON the connected load every day).
- Mon – Fri (program turns ON the connected load
Monday through Friday).
- Weekends (program turns ON the connected load
Saturday and Sunday.
- Each individual day of the week (choose the day of
the week that the connected load should turn ON).
Press the CENTER button to save setting.
ON – Program the
time the connected
load turns ON
Press the ↓ button to highlight ON. Press the CENTER
button to select what time the load will turn on.
Follow step 2 above to set the ON time; choices
include:
- TIME (program a specific time to turn ON the load).
- DUSK (program up to 99 minutes before or after
dusk for the load to turn ON. Note: this is one of the
reasons that it is important that the correct time
zone, longitude/latitude coordinates are entered so
that the time switch can determine when dawn and
dusk will take place).
- DAWN (program up to 99 minutes before or after
dawn for the load to turn ON.
Press the CENTER button to save setting.
OFF – Program the
time the connected
load turns OFF
Press the ↓ button to highlight OFF. Press the CENTER
button to select what time the load will turn off.
Follow Step 2 above to set the OFF time; choices are
the same as for the ON time.
Press the CENTER button to save setting.
Follow the same steps to set Programs 1-8.
To exit the SCHEDULING menu, press the ↓ button to highlight PREVIOUS menu.
Press the CENTER button to select and return to the SETUP menu.
VIEWING SETTINGS
Once the RT-200 has been completely set up, it is possible to see the various
programs without needing to enter the SETUP menu. From the MAIN PAGE press
and hold the ON/OFF button. After 5 seconds the display changes to show the
sunrise and sunset time. Continue to press and hold the ON/OFF button. The
display will cycle through the 8 programs. Once the RT-200 has completed this
cycle, it will continue to cycle through the programs as long as the button is being
pressed.
MANUALON
When the lights are turned ON manually, the word MANUAL appears on the
bottom left corner of the display. The load stays ON until it is manually turned
OFF or until a scheduled program turns the load off. For example, if the load was
scheduled to be turned OFF at a set time, such as 10:00 PM, and it was manually
turned ON before 10:00, then at 10:00 the load automatically turns OFF and the
program number that turned it OFF will replace MANUAL on the display.
When the load is on the light bulb on the lower right corner of the display on the
MAIN PAGE will have light beams surrounding it. When the connected load is off,
the light beams will disappear.
www.wattstopper.com

TROUBLESHOOTING
Lighted switch is OFF, no load response to ON/OFF button press:
- Make certain that the circuit breaker is on and functioning.
Lighted switch is ON, no load response to ON/OFF button press:
- Check the light bulb and/or motor switch on the fan mechanism.
If load does not respond properly after following troubleshooting, turn OFF
power to the circuit then check wire connections or call technical support.
POWER FAILURE
In the event of a loss of power to the RT-200, the unit will maintain the correct
time, location and settings for 72 hours.
PRODUCT RESET
The RT-200 has a reset button located under
the ON/OFF button. If the unit has lost power
for an extended period of time (more than 72
hours) and the unit appears to be functioning
abnormally (the display is not on or lights
are not turning ON/OFF according to the
appropriate schedule), it may be necessary
to reset the unit. Press and release the reset
button. The display will reset so that the Watt
Stopper logo appears as it does upon initial
power up. At this point, the user will be able to
set the date, time and location and reset the
programs.
COVER PLATES
WattStopper RT wall switches fit behind industry standard decorator style switch
cover plates.
Reset Button
Save/
Select
CITY, STATE GMT LAT LONG CITY, STATE GMT LAT LONG
Albuquerque, NM -7 35 -107 Memphis, TN -6 35 -90
Arlington, TX -6 32 -97 Mesa, AZ -7 33 -111
Atlanta, GA -5 34 -84 Miami, FL -5 26 -80
Austin, TX -6 30 -98 Milwaukee, WI -6 43 -88
Baltimore, MD -5 39 -77 Minneapolis, MN -6 45 -94
Boston, MA -5 42 -71 Nashville, TN -6 36 -87
Charlotte, NC -5 35 -81 New Orleans, LA -6 30 -90
Chicago, IL -6 42 -88 New York, NY -5 41 -74
Cleveland, OH -5 41 -82 Oakland, CA -8 38 -122
ColoradoSprings,CO -7 38 -104 Oklahoma City, OK -6 35 -98
Columbus, OH -5 40 -83 Omaha, NE -6 41 -96
Dallas, TX -6 33 -97 Philadelphia, PA -5 40 -75
Denver, CO -7 40 -105 Phoenix, AZ -7 33 -112
Detroit, MI -5 42 -83 Portland, OR -8 46 -123
El Paso, TX -7 32 -106 Raleigh, NC -5 36 -79
Fort Worth, TX -6 33 -97 Sacramento, CA -8 39 -121
Fresno, CA -8 37 -120 Salt Lake City, UT -7 41 -112
Honolulu, HI -10 21 -158 San Anotnio, TX -6 30 -98
Houston, TX -6 30 -95 San Diego, CA -8 33 -117
Indianapolis, IN -5 40 -86 San Francisco, CA -8 38 -122
Jacksonville, FL -5 30 -82 San Jose, CA -8 37 -122
Kansas City, MO -6 39 -95 Seattle, WA -8 47 -122
Las Vegas, NV -8 36 -115 Tucson, AZ -7 32 -111
Long Beach, CA -8 34 -118 Tulsa, OK -6 36 -96
Louisville, KY -5 38 -86 Virginia Beach, VA -5 36 -75
Los Angeles, CA -8 34 -118 Washington, DC -5 39 -77
TOP MAJOR US CITY LOCATIONS
Call 800.879.8585 for Technical Support

APPENDIX: NAVIGATION, USER OPTIONS & PROGRAMMING
When first powered up,
the Watt Stopper logo
appears.
Standard display, aka:
MAIN PAGE when the
RT-200 is powered and
running:
DST
PM
Tue 03/31/2009
12:04
PROG
Press and hold the ↓ button
to see sunset, sunrise,
software version and date:
DST
PM
Tue 03/31/2009
12:04
PROG
RISE TIME:
SET TIME:
VER: 2.0
Jan 19 2009
06:40
19:34
RT200 MENU OPTIONS
From the MAIN PAGE, press
and release the ↑ button to
enter SETUP menu.
Press the ↓ button to
move to desired SETUP
function.
DST
PM
Tue 03/31/2009
12:04
PROG
SETUP
SET TIME AND DATE
LOCATION
PREFERENCES
SCHEDULING
MAIN PAGE
General Notes: Once in SETUP menu, the ↓ button moves to the previous menu
or decreases the value, the ↑ button moves to next menu or increases the value.
The CENTER button confirms the selected variable.
SET TIME AND DATE
Setting the TIME
Press the CENTER
button to highlight
TIME.
Press the CENTER
button to highlight the
hour.
Press the ↓ or the ↑
button to decrease or
increase the hour.
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
01:00 am
03/30/09
ENABLED
1st Sun Mar
1st Sun Nov
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
01 : 00 am
03/30/09
ENABLED
1st Sun Mar
1st Sun Nov
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05 : 00 am
03/30/09
ENABLED
1st Sun Mar
1st Sun Nov
Once the hour is set,
press the CENTER
button to highlight
minutes.
Press the ↓ or the ↑
button to decrease or
increase the minutes.
Once the minutes are set,
press the CENTER button
to save the setting.
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05:30 am
03/30/09
ENABLED
1st Sun Mar
1st Sun Nov
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
01 : 00 am
03/30/09
ENABLED
1st Sun Mar
1st Sun Nov
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05 : 30 am
03/30/09
ENABLED
1st Sun Mar
1st Sun Nov
Setting the DATE
Press the ↓ button to
highlight DATE.
Press the CENTER
button to highlight the
month.
Press the ↓ or the ↑
button to change the
month.
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05:30 am
03/30/09
ENABLED
1st Sun Mar
1st Sun Nov
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05 : 30 am
03/30/09
ENABLED
1st Sun Mar
1st Sun Nov
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05 : 30 am
04/30/09
ENABLED
1st Sun Mar
1st Sun Nov
Call 800.879.8585 for Technical Support

Press the CENTER
button to move to day.
Press the ↓ or the
↑ button to change
the day.
Press the CENTER
button to move to year.
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05 : 30 am
04/30/09
ENABLED
1st Sun Mar
1st Sun Nov
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05 : 30 am
04/01/09
ENABLED
1st Sun Mar
1st Sun Nov
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05 : 30 am
04/01/09
ENABLED
1st Sun Mar
1st Sun Nov
Press the ↓ or the ↑
button to change the
year.
Once the DATE values are
set, press the CENTER
button to save the setting.
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05:30 am
04/01/10
ENABLED
1st Sun Mar
1st Sun Nov
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05 : 30 am
04/01/10
ENABLED
1st Sun Mar
1st Sun Nov
Daylight Savings Time (DST)
Enter the DST start and end days. The unit is shipped with the correct DST start and
end dates already programmed.
Setting the DST (DAYLIGHT SAVINGS TIME)
Press the ↓ button to
move to highlight DST.
Press the CENTER
button to highlight
ENABLED.
Press the ↓ or the
↑ button to choose
ENABLED or DISABLED.
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05:30 am
03/30/09
ENABLED
1st Sun Mar
1st Sun Nov
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05 : 30 am
04/30/09
ENABLED
1st Sun Mar
1st Sun Nov
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05 : 30 am
04/30/09
DISABLED
1st Sun Mar
1st Sun Nov
Once DST is enabled
or disabled, press the
CENTER button to save
the setting.
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05:30 am
03/30/09
ENABLED
1st Sun Mar
1st Sun Nov
Setting the DST START DATE
Press the ↓ button
to move to highlight
START.
Press the CENTER
button to move to Week
in the month.
Press the ↓ or the ↑
button to choose the
week.
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05:30 am
03/30/09
ENABLED
1st Sun Mar
1st Sun Nov
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05 : 30 am
04/30/09
ENABLED
1st Sun Mar
1st Sun Nov
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05 : 30 am
04/30/09
DISABLED
2nd Sun Mar
1st Sun Nov
Once the week is selected,
Press the CENTER button
to highlight month.
Press the ↓ or the ↑
button to choose the
month.
Once the month is set,
press the CENTER
button to save the
setting.
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05:30 am
03/30/09
ENABLED
2nd Sun Apr
1st Sun Nov
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
01 : 00 am
03/30/09
ENABLED
2nd Sun Mar
1st Sun Nov
SET TIME AND DATE
PREVIOUS MENU
TIME:
DATE:
DST:
START:
END:
05 : 30 am
03/30/09
ENABLED
2nd Sun Apr
1st Sun Nov
Setting the DST END DATE
Repeat the same process as setting the DST start date for setting the DST end date.
Once the DST end date is set, press the ↓ button to highlight PREVIOUS menu.
Press CENTER button to return to the SETUP menu.
www.wattstopper.com

LOCATION
If the location information is unknown, visit our website at www.wattstopper.com/
RT-200 for detailed information.
Setting the TIME ZONE
Press the ↓ button to
highlight LOCATION.
Press the CENTER
button to highlight
TIME ZONE.
Press the CENTER
button to highlight
time zone values.
SETUP
SET TIME AND DATE
LOCATION
PREFERENCES
SCHEDULING
MAIN PAGE
LOCATION
PREVIOUS MENU
TIME ZONE: -08
LONGITUDE: -121º
LATITUDE: +37º
LOCATION
PREVIOUS MENU
TIME ZONE: -08
LONGITUDE: -121º
LATITUDE: +37º
Press the ↓ or the ↑
button to decrease or
increase the value.
Once time zone is set,
press the CENTER
button to save the
setting.
LOCATION
PREVIOUS MENU
TIME ZONE: -08
LONGITUDE: -121º
LATITUDE: +37º
LOCATION
PREVIOUS MENU
TIME ZONE: -11
LONGITUDE: -121º
LATITUDE: +37º
Setting the LONGITUDE
Press the ↓ button to
highlight LONGITUDE.
Press the CENTER
button to highlight
Longitude values.
Press the ↓ or the ↑
button to to decrease or
increase the value.
LOCATION
PREVIOUS MENU
TIME ZONE: -08
LONGITUDE: -121º
LATITUDE: +37º
LOCATION
PREVIOUS MENU
TIME ZONE: -08
LONGITUDE: -121º
LATITUDE: +37º
LOCATION
PREVIOUS MENU
TIME ZONE: -08
LONGITUDE: +155º
LATITUDE: +37º
Once Longitude is set,
press the CENTER
button to save the
setting.
LOCATION
PREVIOUS MENU
TIME ZONE: -08
LONGITUDE: -121º
LATITUDE: +37º
Setting the LATITUDE
Press the ↓ button to
highlight LATITUDE.
Press the CENTER
button to highlight
Latitude values.
Press the ↓ or the ↑
button to to decrease or
increase the value.
LOCATION
PREVIOUS MENU
TIME ZONE: -08
LONGITUDE: +155º
LATITUDE: +37º
LOCATION
PREVIOUS MENU
TIME ZONE: -08
LONGITUDE: +155º
LATITUDE: +37º
LOCATION
PREVIOUS MENU
TIME ZONE: -08
LONGITUDE: +155º
LATITUDE: +37º
Once Latitude is set,
press the CENTER
button to save the
setting.
Press the ↓ button to
highlight PREVIOUS
menu.
Once PREVIOUS menu
is highlighted press the
CENTER button to return
to SETUP menu.
LOCATION
PREVIOUS MENU
TIME ZONE: -08
LONGITUDE: -121º
LATITUDE: +37º
SETUP
SET TIME AND DATE
LOCATION
PREFERENCES
SCHEDULING
MAIN PAGE
LOCATION
PREVIOUS MENU
TIME ZONE: -08
LONGITUDE: -121º
LATITUDE: +37º
Call 800.879.8585 for Technical Support

www.wattstopper.com
PREFERENCES
Setting the TIME FORMAT
Press the ↓
button to highlight
PREFERENCES..
Press the CENTER
button to highlight
TIME FMT.
Press the CENTER
button to highlight the
time setting.
SETUP
SET TIME AND DATE
LOCATION
PREFERENCES
SCHEDULING
MAIN PAGE
PREFERENCES
PREVIOUS MENU
TIME FMT: 12 HOURS
DATE FMT: MM/DD/YY
SOUND: ENABLED
FLASH: DISABLED
PREFERENCES
PREVIOUS MENU
TIME FMT: 12 HOURS
DATE FMT: MM/DD/YY
SOUND: ENABLED
FLASH: DISABLED
Press the ↓ or the ↑
button to switch between
12 hours and 24 hours.
Once time format is
set, press the CENTER
button to save the
setting.
PREFERENCES
PREVIOUS MENU
PREFERENCES
PREVIOUS MENU
TIME FMT: 24 HOURS
DATE FMT: MM/DD/YY
SOUND: ENABLED
FLASH: DISABLED
TIME FMT: 24 HOURS
DATE FMT: MM/DD/YY
SOUND: ENABLED
FLASH: DISABLED
Setting the DATE FORMAT
Press the ↓ button to
highlight DATE FMT.
Press the CENTER
button to highlight
month setting.
Press the ↓ or the ↑
button to choose the
month setting.
PREFERENCES
PREVIOUS MENU
TIME FMT: 12 HOURS
DATE FMT: MM/DD/YY
SOUND: ENABLED
FLASH: DISABLED
PREFERENCES
PREVIOUS MENU
TIME FMT: 12 HOURS
DATE FMT: MM/DD/YY
SOUND: ENABLED
FLASH: DISABLED
PREFERENCES
PREVIOUS MENU
TIME FMT: 24 HOURS
DATE FMT: MM/DD/YY
SOUND: ENABLED
FLASH: DISABLED
Once month format is set,
press the CENTER button
to save the setting.
PREFERENCES
PREVIOUS MENU
TIME FMT: 12 HOURS
DATE FMT: MM/DD/YY
SOUND: ENABLED
FLASH: DISABLED
Setting the SOUND
Press the ↓ button to
highlight SOUND.
Press the CENTER
button to highlight
ENABLED.
Press the ↓ or the
↑ button to choose
ENABLED or DISABLED.
PREFERENCES
PREVIOUS MENU
TIME FMT: 12 HOURS
DATE FMT: MM/DD/YY
SOUND: ENABLED
FLASH: DISABLED
PREFERENCES
PREVIOUS MENU
TIME FMT: 12 HOURS
DATE FMT: MM/DD/YY
SOUND: ENABLED
FLASH: DISABLED
PREFERENCES
PREVIOUS MENU
TIME FMT: 24 HOURS
DATE FMT: MM/DD/YY
SOUND: DISABLED
FLASH: DISABLED
Once sound preference
is set, press the CENTER
button to save the setting.
PREFERENCES
PREVIOUS MENU
TIME FMT: 12 HOURS
DATE FMT: MM/DD/YY
SOUND: DISABLED
FLASH: DISABLED

Setting the FLASH
Press the ↓ button to
highlight FLASH.
Press the CENTER
button to highlight
DISABLED.
Press the ↓ or the
↑ button to choose
ENABLED or DISABLED.
PREFERENCES
PREVIOUS MENU
TIME FMT: 12 HOURS
DATE FMT: MM/DD/YY
SOUND: DISABLED
FLASH: DISABLED
PREFERENCES
PREVIOUS MENU
TIME FMT: 12 HOURS
DATE FMT: MM/DD/YY
SOUND: DISABLED
FLASH: DISABLED
PREFERENCES
PREVIOUS MENU
TIME FMT: 24 HOURS
DATE FMT: MM/DD/YY
SOUND: DISABLED
FLASH: ENABLED
Once flash preference is
set, press the CENTER
button to save the setting.
PREFERENCES
PREVIOUS MENU
TIME FMT: 12 HOURS
DATE FMT: MM/DD/YY
SOUND: DISABLED
FLASH: ENABLED
PREFERENCES
PREVIOUS MENU
TIME FMT: 12 HOURS
DATE FMT: MM/DD/YY
SOUND: DISABLED
FLASH: ENABLED
SETUP
SET TIME AND DATE
LOCATION
PREFERENCES
SCHEDULING
MAIN PAGE
SCHEDULE
Setting the PROGRAM
Press the ↓
button to highlight
SCHEDULING.
Press the CENTER
button to enter the
PROGRAM menu.
Press the CENTER
button to highlight the
program #.
SETUP
SET TIME AND DATE
LOCATION
PREFERENCES
SCHEDULING
MAIN PAGE
SCHEDULING
PREVIOUS MENU
SCHEDULING
PREVIOUS MENU
PROGRAM: # 1
DAY(s): None
ON: DUSK OFF: DUSK
+00 Min +00 Min
PROGRAM: # 1
DAY(s): None
ON: DUSK OFF: DUSK
+00 Min +00 Min
Press the ↓ or the ↑
button to decrease or
increase program #.
Once the program # is
set, press the CENTER
button to save the setting.
SCHEDULING
PREVIOUS MENU
PROGRAM: # 2
DAY(s): None
ON: DUSK OFF: DUSK
+00 Min +00 Min
SCHEDULING
PREVIOUS MENU
PROGRAM: # 2
DAY(s): None
ON: DUSK OFF: DUSK
+00 Min +00 Min
There are 8 different programs that can be set.
Setting the DAY(s)
This refers to the days of the week when the program will be initiated
Press the ↓ button to
highlight DAY(s)
Press the CENTER
button to highlight the
day(s) options.
Press the ↓ or the ↑
button to choose the
day(s) options.
SCHEDULING
PREVIOUS MENU
SCHEDULING
PREVIOUS MENU
PROGRAM: # 2
DAY(s): None
ON: DUSK OFF: DUSK
+00 Min +00 Min
PROGRAM: # 2
DAY(s): None
ON: DUSK OFF: DUSK
+00 Min +00 Min
SCHEDULING
PREVIOUS MENU
PROGRAM: # 2
DAY(s): Mon - Fri
ON: DUSK OFF: DUSK
+00 Min +00 Min
Press CENTER button to
save the setting.
SCHEDULING
PREVIOUS MENU
PROGRAM: # 2
DAY(s): Mon - Fri
ON: DUSK OFF: DUSK
+00 Min +00 Min
Options include:
None, All, Mon – Fri, Weekends, Sun, Mon, Tue, Wed, Thu, Fri, Sat.
Once PREVIOUS MENU
is highlighted press the
CENTER button to return
to SETUP menu.
Press the ↓ button to
highlight PREVIOUS
MENU.
Call 800.879.8585 for Technical Support

WARRANTY INFORMATION
WattStopper warranties its products to be free of defects in materials
and workmanship for a period of five (5) years. There are no
obligations or liabilities on the part of WattStopper for consequential
damages arising out of, or in connection with, the use or
performance of this product or other indirect damages with respect
to loss of property, revenue or profit, or cost of removal, installation
or reinstallation.
Setting ON/OFF
This sets when the program will come on. The options for this setting are DUSK,
DAWN, or TIME. The DAWN or DUSK option will program the number of minutes
before or after dawn or dusk that program should take effect.
Press the ↓ button to
highlight ON.
Press the CENTER
button to highlight the
DUSK options.
Press the ↓ or the ↑
button to choose DUSK,
DAWN, or TIME.
SCHEDULING
PREVIOUS MENU
SCHEDULING
PREVIOUS MENU
PROGRAM: # 2
DAY(s): None
ON: DUSK OFF: DUSK
+00 Min +00 Min
PROGRAM: # 2
DAY(s): None
ON: DUSK OFF: DUSK
+00 Min +00 Min
SCHEDULING
PREVIOUS MENU
PROGRAM: # 2
DAY(s): Mon - Fri
ON: TIME OFF: TIME
2:00 PM 12:00 AM
To set the time:
Press the CENTER button
to highlight the hour.
Press the ↓ or the ↑
button to decrease or
increase the hour
Press the CENTER
button to move to the
minutes.
SCHEDULING
PREVIOUS MENU
SCHEDULING
PREVIOUS MENU
PROGRAM: # 2
DAY(s): Mon - Fri
ON: TIME OFF: TIME
2: 00 PM 12: 00 AM
PROGRAM: # 2
DAY(s): Mon - Fri
ON: TIME OFF: TIME
2: 00 PM 12: 00 AM
SCHEDULING
PREVIOUS MENU
PROGRAM: # 2
DAY(s): Mon - Fri
ON: TIME OFF: TIME
2: 00 PM 12: 00 AM
Press the ↓ or the ↑
button to decrease or
increase the minutes
Once the time is set,
press the CENTER button
to save the setting. Press the ↓ button to
move to OFF.
SCHEDULING
PREVIOUS MENU
PROGRAM: # 2
DAY(s): Mon - Fri
ON: TIME OFF: TIME
2: 00 PM 12: 00 AM
SCHEDULING
PREVIOUS MENU
PROGRAM: # 2
DAY(s): None
ON: TIME OFF: TIME
2: 00 PM 12: 00 AM
SCHEDULING
PREVIOUS MENU
PROGRAM: # 2
DAY(s): None
ON: TIME OFF: TIME
2: 00 PM 12: 00 AM
Follow the same steps for setting the OFF options as you did for setting the ON
options.
The same process is used for setting the DAWN and DUSK options that was used
for setting the TIME option.
Navigating Back to the MAIN PAGE
Press the ↓ button to
highlight PREVIOUS
MENU.
Press the CENTER
button to return to
SETUP menu.
Press the ↓ button to
highlight MAIN PAGE.
SCHEDULING
PROGRAM: # 2
DAY(s): None
ON: TIME OFF: TIME
17 : 30 06 : 30
SETUP
SET TIME AND DATE
LOCATION
PREFERENCES
SCHEDULING
MAIN PAGE
SETUP
SET TIME AND DATE
LOCATION
PREFERENCES
SCHEDULING
MAIN PAGE
PREVIOUS MENU
Press the CENTER
button to return to the
MAIN PAGE.
DST
PM
Tue 03/31/2009
01:15
PROG
Please
Recycle
2800 De La Cruz Boulevard, Santa Clara, CA 95050
Technical Support: 800.879.8585 • www.wattstopper.com
2800 De La Cruz Boulevard, Santa Clara, CA 95050
800.879.8585 • www.wattstopper.com
06250r5 3/2013
Please
Recycle