Welbilt Merrychef conneX User manual

Quick Start Guide
Welcome to your new Merrychef high speed oven. This guide has been created
to get you up and running with your new Merrychef conneX®high speed oven as
quickly as possible.
Important: Before using your oven please ensure you fully read and follow the
safety instructions provided with the appliance.
A comprehensive installation and user manual
is available at www.merrychef.com
Make all the relevant safety checks and ensure the appliance is clean and empty.
The rst time the oven is connected to the electrical supply there will be a series of setup screens.
Press the power icon to turn the appliance on, you will be prompted to:
select the language you would like the oven to operate in,
set time and date,
connect to Wi-Fi or Ethernet (this can be done at a later stage in ‘Settings’),
select a preheat temperature.
When the preheat cycle is complete the selected ‘Operating Mode’ screen will appear,
and you can start using your oven.
First time start up
Start up
1.
2.
Ensure the appliance is plugged in. Make all the relevant safety
checks and ensure the cavity is clean and empty.
Select the power icon on screen, to switch ON the oven.
The ‘easyTouch®’ screen illuminates and scrolls through the Welbilt brands.
Once booted the Merrychef splash screen appears, giving shortcut options to
‘Information’ or ‘Settings’.
If left idle the screen automatically progresses to Preheat/Preheat selection.
If only one preheat temperature has been set, the oven will automatically
start heating up to temperature.
www.merrychef.com
Part number: 32Z9230
Language: MULTILINGUAL
ENGLISH
conneX Quick Start Guide_2022.indd 1conneX Quick Start Guide_2022.indd 1 26/01/2022 14:1226/01/2022 14:12

3.
4.
When the appliance is setup with two or more preheating temperatures
a choice is displayed.
A scroll bar at the side of the screen indicates that there are more
temperature choices not shown on the screen.
If necessary, swipe up or down to navigate the preheat selections available.
Then select the temperature required to start preheating the cavity.
During preheating the display shows the progress as the cavity heats up to
the set temperature.
To stop the cavity heating up touch the back arrow in the bottom left of the
screen (this will return you to the previous screen).
When the preheat cycle is complete the selected ‘Operating Mode’ screen
will appear, and you can start using your oven.
In Full Serve Mode the ‘Home’ screen is displayed. Cooking proles are
accessed through the ‘Cookbook’ and recipes are created via the ‘Chef’s Hat’.
In Quick Serve Mode the ‘Cookbook’ is immediately displayed. This allows
you to manage up to a 3-tier programme with category groupings.
Press & Go Mode is ideal for smaller businesses and allows you to quickly
access recipe les with one touch.
In Manual Mode, cooking proles are not available. Each cook is
programmed individually.
Operating modes can be selected by going to the ‘Modes’ icon settings, here,
you will also be able to:
Turn on Show Favourites, to feature a ‘Favourites’ icon in the Cookbook which
ranks all your recipes in order of the most popular used. (Only available in
Full Serve and Quick Serve Modes.)
Turn on Show All Recipes, to feature an ‘All recipes’ icon in the Cookbook
which shows you all the recipes loaded onto the oven. (Only available in Full
Serve and Quick Serve Modes.)
Select Unlock to allow you to add, edit or delete recipes in any mode. (Press
and hold a cooking prole or category until the delete/edit overlap appears.)
Operating modes
How to cook
1. Select a cooking prole.
2. Follow the prompts displayed by the software.
3. Open the appliance door.
4. Place the prepared food in the microwave combination oven.
5. Close the appliance door again.
6. Start the cooking process.
7. Wait for the cooking process to nish.
8. An audible signal is given when the cooking process is nished.
9. Follow the prompts displayed by the software.
10.Open the appliance door.
11.Take out the food.
conneX Quick Start Guide_2022.indd 2conneX Quick Start Guide_2022.indd 2 26/01/2022 14:1226/01/2022 14:12

Button Meaning Function
‘Recipe Creation’ enables multistage cooking proles to be
developed, then stored under a name and icon for reuse.
Recipe Creation/
Development Mode
Press & Go ‘Press & Go’ allows quick access to use the cooking proles that
are already stored.
Cookbook
Cleaning
‘Cookbook’ contains the cooking proles stored in the
memory of the appliance. It displays Favourites, Categories
and a complete listing of all cooking proles available
‘All recipes’.
‘Cleaning’ allows the appliance to be prepared for cleaning with
pictorial displayed assistance during the cleaning process.
Preheats are used to control the appliance operating
temperature, up to 6 preheats can be stored for the appliance.
Temperature Change
Settings ‘Settings’ are used to control the appliance settings and
functions including time and language, loading cooking proles
and for service and maintenance purposes.
This ‘Home’ screen is displayed when the
oven is in Full Serve Mode.
Home screen
Keyboard Screen
Appearance
Select the ‘Preheat’ icon on the ‘Home’ screen, or the preheat button in the bottom left hand corner
of the screen if the oven is in ‘Quick Serve’ or ‘Press & Go Modes’. (If only one preheat has been set
on the appliance the preheat icon does not appear in ‘Quick Serve’ or ‘Press & Go Modes’.)
Recipes not created for the ovens current preheat temperature will be inactive and
greyed out. To determine these recipes preheat temperature, select, press and
hold the icon until the edit/delete option appears over the button, then select edit
to investigate the recipes parameters. Then return to the ‘Home’ screen.
Note: this can only be done when the operating mode is unlocked in ‘Modes’.
A green highlight of the temperature value indicates the present
cavity temperature.
Select the required cavity temperature for the cooking prole, for example
250°C / 482°F and wait for the cavity to reach the required temperature.
Changing the cavity temperature
ENGLISH
conneX Quick Start Guide_2022.indd 3conneX Quick Start Guide_2022.indd 3 26/01/2022 14:1226/01/2022 14:12

Settings
Select the ‘Settings’ symbol from the main menu screen.
Enter the default password ‘MANAGER’ and select the green tick to display the ‘Settings’ menu.
Within settings you can customise your appliance. Use the scroll bar to see the full list of settings available,
then follow the on-screen instructions to apply any changes you would like to make.
A green toggle bar or button means the action is switched on.
A grey toggle bar or button means the action is switched o.
For more detailed information for each of the settings please refer to the full installation and user manual.
Cleaning procedures
It is important the oven is cleaned every day, this will avoid grease build up in the cavity.
In ‘Full Serve Mode’, select the ‘Clean’ symbol from the main menu and follow the
on-screen pictorial instructions. These can be tailored for your operation by changing
the cleaning settings.
In ‘Quick Serve’, ‘Press & Go’ or ‘Manual Mode’; select the power button symbol to
disable heating and to start the cooling down cycle.
Once the cleaning sequence is complete, the oven will power down and return to the power button screen.
Connectivity
Choose the ‘Connectivity’ option from the ‘Settings’ menu. Here you can
connect via WI-FI or the Ethernet port at the rear of the oven.
Access KitchenConnect®via the QR code link from KitchenConnect®settings.
For further details on where to buy, how to
service and for our agship culinary support
please visit www.merrychef.com
Customer satisfaction
Your satisfaction with our products
is of paramount importance to us.
With over 70 years experience you
can be assured of a high quality,
precision built appliance.
©2022 Welbilt Inc. All rights reserved. Merrychef conneX®Quick Start Guide / EMEA multilingual / 01/2022
Keyboard buttons and their functions
For names of cooking proles, names of categories, cooking prole groups and passwords use 1-20 characters.
For stage instructions of individual cooking proles use 1-54 characters in 5 lines maximum.
Button Meaning
Keyboard screen
Clear screen
Keyboard
Function
The keyboard screen is used to enter an authorised
password to enter data for programmes and may restrict
operator access to some functions.
Select the ‘clear screen’ key to delete all text from the
keyboard screen.
Type in text using the keyboard.
Keyboard scroll
Enter /OK
Previous screen
Select the up/down arrows to scroll the keyboard screen,
for lower case, numbers, etc.
Select the green tick mark to conrm settings and continue.
Select the ‘backspace’ key to return to a previous screen.
conneX Quick Start Guide_2022.indd 4conneX Quick Start Guide_2022.indd 4 26/01/2022 14:1226/01/2022 14:12