Weller WT 1 User manual

WT 1
WT 1H
DE Originalbetriebsanleitung
GB Translation of the original instructions
ES Traducción del manual original
FR Traduction de la notice originale
IT Traduzione delle istruzioni originali
PT Tradução do manual original
NL Vertaling van de oorspronkelijke gebruiksaanwijzing
SV Översättning av bruksanvisning i original
DK Oversættelse af den originale brugsanvisning
FI Alkuperäisten ohjeiden käännös
GR Μετάφρασητουπρωτοτύπουτωνοδηγιώνχρήσης
TR Orijinalişletmetalimatıçevirisi
CZ Překladpůvodníhonávodukpoužívání
PL Tłumaczenieminstrukcjioryginalnej
HU Eredetihasználatiutasításfordítása
SK Prekladpôvodnéhonávodunapoužitie
SL Prevod izvirnih navodil
EE Algupärase kasutusjuhendi tõlge
LV Instrukcijutulkojumamnooriģinālvalodas
LT Originalios instrukcijos vertimas
BG преводнаоригиналнатаинструкция
RO Traducere a instructiunilor originale
HR Prijevod originalnih uputa
RU Оригинальноеруководствопоэксплуатации
CN 原装使用说明
KO 오리지널 사용 설명서
JP 取扱説明書

> 50 mm
WT 1HWT 1

WT 1H
WT 1
WT 1H
WP 80 SET WSP 80 SET
WP 200 SET
WP 120 SET WSP 150 SET
2
1
WTP 90 SET
WT 1H

°C °F
–
+
ON
OFF
ON
OFF

6
–
+
–
+
–
+
1 - 99 min100 - 300 °C
200 - 600 °F
1 - 999 min
EXIT
MENU
3
sec


100 - 300 °C
200 - 600 °F

7
–
+
1 - 99°C
1 - 180°F
–
+
1 - 999
–
+
-40 - +40 °C
-72 - +72 °F
°C / °F
ON / OFF FE /rob
–
+
0 - 100 %
DE StandbyZeit
EN StandbyTime
ES Tiempostandby
FR TempsStandby
IT Ritardostandby
PT TempodeStandby
NL Standby-tijd
SV Vilotemp Tid
DK Standbytid
FI Valmiusaika
GR Χρόνοςετοιμότητας
TR BeklemeZamani
CZ Pohotovostníčas
PL Czasdouśpienia
HU Készenléti idõ
SK Doba pohotovosti
SL Časstanjapripravljenosti
EE Ooterežiimiaeg
LV „Standby”laiks
LT Budėjimorežimolaikas
BG Standbyвреме
RO Timpuldestandby
HR Vrijemerežimapripravnosti
RU Времяожидания
CN 待机时间
KO 스탠바이 시간
JP 待機時間
1 - 99 min

Read these instructions and the safety
guidelines carefully before starting up the unit
and starting work.
Failuretoobservethesafetyregulationsresultsinariskto
life and limb.
Keep these instructions in a place that is accessible to all
users. Please adhere to the operating instructions of the
connected devices.
Safety information
Thisappliancecanbeusedbychild-
renagedfrom8yearsandaboveand
personswithreducedphysical,sensory
or mental capabilities or lack of experi-
enceandknowledgeiftheyhavebeen
given supervision or instruction concer-
ninguseoftheapplianceinasafeway
and understand the hazards involved.
Childrenshallnotplaywiththeappli-
ance.
Cleaning and user maintenance shall
notbemadebychildrenwithoutsuper-
vision.
Keep other persons well away from your workplace.
The work area is out of bounds for children and unauthorised
persons. Never allow other persons to touch the soldering
tool or cable.
WARNING Electrical shock
Connecting the control unit incorrectly poses a risk
of injury due to electric shock and can damage the
device.
• Carefullyreadtheattachedsafetyinformation,thesafety
informationaccompanyingtheseoperatinginstructions
aswellastheoperatinginstructionsforyourcontrolunit
before putting the control unit into operation and observe
thesafetyprecautionsspeciedtherein.
• OnlyconnectWELLERtools.
If the device is faulty, active electrical conductors may
be bare or the PE conductor may not be functional.
• RepairsmustalwaysbereferredtoaWeller-trained
specialist.
• Iftheelectricaltool‘spowersupplycordisdamaged,this
mustbereplacedwithaspeciallyprefabricatedpower
supplycordavailablethroughthecustomerservice
organisation.
Protect yourself against electric shocks. The handles
on soldering tools with an antistatic design are conductive.
• Avoid touching earthed objects such as pipes, heaters,
cookers and refrigerators.
• Do not use the soldering tool in a damp or wet
environment.
• Neverworkonvoltage-carryingparts.
WARNING Risk of burns
Risk of burns from the soldering tool while the control
unit is operating. Tools may still be hot long after they
have been switched off.
• Alwaysplacethesolderingtoolinthesafetyrestwhile
notinuse.Makesurethesafetyholderisstable.
• Onlyreplacesoldertipswhencold
Risk of burning through liquid solder. Protect yourself
against solder splashes.
• Wearappropriateprotectiveclothingtoprotectyourself
againstburns.Protectyoureyesbywearingeye
protectors.
• When working with adhesives, special attention must be
paidtothewarninginformationprovidedbytheadhesive
manufacturer.
WARNING Fire hazard
Covering the soldering iron or the safety holder poses
a re hazard. Always keep objects well away from the
soldering iron and safety holder.
• Alwayskeepobjectswellawayfromthesolderingiron
andsafetyholder.
• Keepallcombustibleobjects,liquidsorgaseswellaway
from the hot soldering tool.

Store your soldering tool in a safe place. When not in
use,unitsandtoolsshouldbestoredinadry,highorlocked
area out of the reach of children. Make sure that unused
soldering tools are free of voltage and de-pressurised.
The mains cable must only be plugged into the mains
socket or adapter approved for this purpose. Check to
see if the mains voltage matches the ratings on the
nameplate. Make sure the machine is switched off before
plugging in.
Do not use the cable for purposes other than those for
which it is intended.Nevercarrytheunitbythecable.Do
not use the cable to pull the plug out of the socket. Protect
the cable against heat, oil and sharp edges.
Be alert. Payattentiontowhatyouaredoing.Besmart
whenusingtheunit.Donotusethesolderingtoolifyouare
havingdifcultyconcentrating.
Avoid abnormal posture. Arrangeyourworkstationinan
ergonomicallycorrectway.Avoidbadposturewhenusingthe
unit, as this can lead to postural problems.
The soldering tool must be operated only in perfect
technical working order.Safetydevicesmustnotbe
deactivated.
Faults and defects must be repaired immediately.
Beforeusingtheunit/tool,safetydevicesmustbecarefully
checkedtomakesurethattheyarefunctioningproperlyand
in the manner intended. Check that moving parts are func-
tioningproperlyandarenotsticking,andwhetherpartsare
damaged.Allpartsmustbecorrectlyttedandmustsatisfy
alltherequirementsnecessarytoguaranteetroublefree
operation of the unit.
Use the correct tool. Useonlyaccessoriesorauxiliaryde-
vices which are included in the list of accessories or appro-
vedforusebythemanufacturer.UseWELLERaccessories
orauxiliarydevicesonoriginalWELLERequipmentonly.The
useofothertoolsandotheraccessoriescancauseinjury.
Secure the tool.Useclampingxturestoholdthe
workpiece.
Use a solder fume extraction unit. If appliances for
connecting solder fume extraction units are available, ensure
thattheyareconnectedandusedproperly.
Specied Conditions Of Use
SupplyunitforWELLERsolderingtools.Usethesoldering
stationonlyforthepurposeofsoldering,asspeciedinthe
Operating Instructions.
Thisdevicemayonlybeusedatroomtemperatureand
indoors. Protect against moisture and direct sunlight.
User groups
Due to differing degrees of risk and potential hazards, sever-
alworkstepsmayonlybeperformedbytrainedexperts.
Work step User groups
Default soldering para-
meters
Specialist personnel with
technical training
Replacing electrical repla-
cement parts
Electricians
Default maintenance
intervals
Safetyexpert
Operation Non-specialists
Operation
Replacing electrical repla-
cement parts
Technical trainees under
the guidance and supervi-
sion of a trained expert
Care and maintenance
WARNING
Before doing any work on the machine, pull the plug
out of the socket. Leave the unit to cool down.
Check all connected cables and hoses on a regular basis. If
powertoolsaredamaged,theymustbeimmediately
removed from use.
Repairs must always be referred to a Weller-trained
specialist.
Useoriginalreplacementpartsonly.
Warranty
Claimsbythebuyerforphysicaldefectsaretime-barred
afteraperiodofoneyearfromdeliverytothebuyer.This
doesnotapplytoclaimsbythebuyerforindemnicationin
accordancewith§§478,479BGB(GermanFederalLaw
Gazette).
Weshallonlybeliableforclaimsarisingfromawarranty
furnishedbyusifthequalityordurabilitywarrantyhasbeen
furnishedbyuseinwritingandusingtheterm„Warranty“.
Thewarrantyshallbevoidifdamageisduetoimproperuse
andifthedevicehasbeentamperedwithbyunauthorised
persons.

Original declaration of conformity
Soldering station WT 1, WT 1H
We hereby declare that the products described herein
comply with the following guidelines:
2014/30/EU,2006/95/EG,2011/65/EU(RoHS)
Applied harmonised standards:
DIN EN 60335-1: 2012-10
DIN EN 60335-2-45: 2012-08
DINEN62233:2008-11/2009-04
DIN EN 55011: 2009+A1:2010
DIN EN 61326-1: 2013
DINEN61000-3-2:2010-03/2011-06
DIN EN 61000-3-3: 2012-07
DIN EN 50581:2013-02
Besigheim, 2016-02-25
T. Fischer B.Frühwald
Technical director Managing director
Authorised to compile technical documentation.
Weller Tools GmbH
Carl-Benz-Straße2,74354Besigheim,Germany
Technical Data
Soldering station WT 1 WT 1H
Dimensions L x W x H (mm)
(Inch)
150 x 130 x 101
5.91 x 5.12 x 3.98
Fuse 230V(mA)
120V(A)
T500
T1
T800
T1,6
Weight (kg) 1,9 3,0
Mainssupplyvoltage (V/Hz) 230/50,120/60
Power consumption (W) 95 150(200)
Safetyclass I, antistatic housing
III, Soldering tool
Temperature range
Tool dependent
(°C)
(°F)
50-450/550
150-850/950
Temperatureaccuracy (°C/°F) ±9/±17
Temperaturestability (°C/°F) ±2/±4
Symbols
Caution!
Warning! Risk of burns!
Read the operating instructions!
Beforeperformingworkofanykindontheunit,
alwaysdisconnectthepowerplugfromthe
socket.
ESD-compatible design and ESD-compatible
workstation
Equipotential bonding
CEmarkofconformity
Fuse
Safetytransformer
Disposal
Do not dispose of electric tools together with
household waste material! In observance of
EuropeanDirective2012/19/EUonwaste
electrical and electronic equipment and its
implementation in accordance with national
law, electric tools that have reached the end
oftheirlifemustbecollectedseparatelyand
returnedtoanenvironmentallycompatible
recyclingfacility.

WT 1

WT 1H