Western Digital Ultrastar Data60 User manual

User Guide
Ultrastar Data60
Regulatory Model: H4060-J
December 2020
Rev. 1.18
1ET1101

User Guide Table of Contents
Table of Contents
Revision History.................................................................................................................................... vi
Notices....................................................................................................................................................x
Points of Contact.................................................................................................................................. xi
Product Label Information..............................................................................................................xi
Chapter 1. Overview.........................................................................................................1
Ultrastar Data60 Description............................................................................................................... 2
System Architecture Overview........................................................................................................... 2
System Level Block Diagram...............................................................................................................3
Environmental Specifications...............................................................................................................4
Electrical Specifications....................................................................................................................... 4
Mechanical Specifications....................................................................................................................5
Performance Specifications................................................................................................................. 6
Ultrastar Data60 Layout....................................................................................................................... 6
List of Customer Replaceable Units (CRUs)....................................................................................... 7
Supported Operating Systems........................................................................................................... 8
LEDs.......................................................................................................................................................9
Front and Rear IO LEDs................................................................................................................9
IOM LEDs.......................................................................................................................................11
IOM Fan LED................................................................................................................................. 11
PSU LED........................................................................................................................................12
Rear Fan LED................................................................................................................................13
Drive Assembly LED.................................................................................................................... 14
Ultrastar Data60 Rack Requirements.................................................................................................15
Compatible Rack Hardware Configuration................................................................................17
Power Requirements.......................................................................................................................... 19
ESD....................................................................................................................................................... 19
Enclosure Cooling...............................................................................................................................19
i

User Guide Table of Contents
SAS Cabling........................................................................................................................................20
Supported SKUs................................................................................................................................. 22
List of Compatible Drives..................................................................................................................22
Chapter 2. Components................................................................................................34
Chassis.................................................................................................................................................35
Chassis Specifications................................................................................................................ 35
Chassis Layout.............................................................................................................................36
IOM...................................................................................................................................................... 38
IOM Specifications...................................................................................................................... 38
IOM Layout.................................................................................................................................. 39
IOM Blank.....................................................................................................................................39
PSU...................................................................................................................................................... 40
PSU Specifications...................................................................................................................... 40
PSU Layout................................................................................................................................... 41
Rear Fan.............................................................................................................................................. 42
Rear Fan Specifications.............................................................................................................. 42
Rear Fan Layout.......................................................................................................................... 43
IOM Fan............................................................................................................................................... 44
IOM Fan Specifications............................................................................................................... 44
IOM Fan Layout........................................................................................................................... 45
Rails......................................................................................................................................................46
Rails Specifications..................................................................................................................... 46
Rails Layout..................................................................................................................................47
Rear Cover Alignment Bracket.................................................................................................. 48
CMA..................................................................................................................................................... 49
CMA Specifications.....................................................................................................................49
CMA Layout.................................................................................................................................50
CMA Cable Tray...........................................................................................................................51
3.5in HDD Assembly.......................................................................................................................... 52
ii

User Guide Table of Contents
3.5in HDD Assembly Specifications.......................................................................................... 52
3.5in HDD Assembly Layout...................................................................................................... 53
3.5in Drive Blank......................................................................................................................... 54
2.5in SSD Assembly........................................................................................................................... 55
Operating the 2.5" Drive Carrier............................................................................................... 55
Chapter 3. Support........................................................................................................58
Part Replacement Service Window................................................................................................. 59
IOM Replacement...............................................................................................................................59
PSU Replacement...............................................................................................................................62
Rear Fan Replacement.......................................................................................................................66
IOM Fan Replacement........................................................................................................................69
3.5in HDD Assembly Replacement....................................................................................................71
CMA Replacement..............................................................................................................................75
Rails Replacement..............................................................................................................................90
Chassis Replacement........................................................................................................................ 119
Special Considerations for Cable Routing......................................................................................154
Cabling for CMA............................................................................................................................... 156
Before You Begin.......................................................................................................................156
Cabling CMA.............................................................................................................................. 157
Chapter 4. Management..............................................................................................159
Management Overview.................................................................................................................... 160
Firmware Features Overview..........................................................................................................160
Firmware Upgrade.............................................................................................................................161
Downloading Firmware from the Support Portal.................................................................... 161
Linux Upgrade Preparation....................................................................................................... 163
Linux Upgrade to New Firmware.............................................................................................165
Non-Automatic Firmware Activation in Linux.......................................................................... 167
Windows Firmware Upgrade Preparation...............................................................................169
iii

User Guide Table of Contents
Windows Upgrade to New Firmware..................................................................................... 170
Non-Automatic Firmware Activation in Windows...................................................................173
OOBM Management Overview........................................................................................................ 176
Configuring OOBM Network Settings Using SES.................................................................... 176
Upgrading Firmware with OOBM.............................................................................................178
SES Page 02......................................................................................................................................180
Zoning................................................................................................................................................180
Before Zoning............................................................................................................................180
Predefined Zoning Configurations...........................................................................................180
sg_senddiag Command............................................................................................................188
Enabling Zoning using Linux.................................................................................................... 188
Disabling Zoning using Linux....................................................................................................192
Enabling Zoning using Windows.............................................................................................195
Disabling Zoning using Windows............................................................................................198
File-Based Zoning.....................................................................................................................202
Subenclosure Nickname................................................................................................................... 212
Setting the Subenclosure Nickname........................................................................................212
Partially Populated Enclosures......................................................................................................... 214
Partial Population Configurations............................................................................................. 214
Installing Drives..........................................................................................................................217
Daisy Chaining..................................................................................................................................220
Daisy Chaining Configurations................................................................................................. 221
One Host Cable Configurations.............................................................................................. 222
Two Host Cable Configurations.............................................................................................. 227
Cabling for Daisy Chaining...................................................................................................... 232
Chapter 5. Safety.........................................................................................................239
Safety Warnings and Cautions........................................................................................................240
Electrostatic Discharge....................................................................................................................240
iv

User Guide Table of Contents
Optimizing Location.........................................................................................................................240
Power Connections.......................................................................................................................... 241
Power Cords......................................................................................................................................241
Rackmountable Systems...................................................................................................................241
Safety and Service........................................................................................................................... 242
Chapter 6. Disclaimers................................................................................................ 243
Restricted Access Location.............................................................................................................244
Safety Compliance........................................................................................................................... 244
Electromagnetic Compatibility (EMC) Class A Compliance..........................................................244
Country Certifications...................................................................................................................... 245
Chapter 7. Regulatory Statements............................................................................246
Europe (CE Declaration of Conformity).......................................................................................... 247
FCC Class A Notice..........................................................................................................................247
ICES-003 Class A Notice—Avis NMB-003, Classe A......................................................................247
Japanese Compliance Statement, Class A ITE...............................................................................247
Taiwan Warning Label Statement, Class A ITE..............................................................................248
v

User Guide Revision History
Revision History
Date Revision Comment
November 2017 1.0 Initial release
November 2017 1.1 •The crossbar on the CMA was changed. See CMA (page 49).
•Removed Lowline power specs from Power Requirements (page
19).
•Changed required rack depth, see Mechanical Specifications (page
5).
•Changed typical power consumption, see Electrical Specifications
(page 4).
•Updated LED Flash Patterns, see LEDs (page 9).
December 2017 1.2 •Added active cable support
•Added firmware upgrade section. See Firmware Upgrade (page
161).
•Updated the Non-Op altitude specification. See Environmental
Specifications (page 4).
January 2018 1.2.1 Updated the product name
January 2018 1.3 •Updated information on the 2.5" drive carrier option. See 2.5in SSD
Assembly (page 55).
•Added torque requirements for all screws used in the enclosure.
•Updated the IOM replacement section to account for the possibility
of a firmware mismatch. See IOM Replacement (page 59).
•Updated the drive assembly installation instructions to clarify
the orientation of the drive assemblies. 3.5in HDD Assembly
Replacement (page 71).
April 2018 1.4 •Updated Compatible Drives List. See List of Compatible Drives
(page 22).
•Updated the Rack Requirements. See Ultrastar Data60 Rack
Requirements (page 15).
•Updated the Firmware Upgrades. See: Firmware Upgrade (page
161)
May 2018 1.5 Added the Part Replacement Service Window. See: Part Replacement
Service Window (page 59)
June 2018 1.6 •Updated Compatible Drives List. See List of Compatible Drives
(page 22)
•Updated the Firmware Upgrade section. See Firmware Upgrade
(page 161)
vi

User Guide Revision History
Date Revision Comment
•Updated the Firmware Download section. See Downloading
Firmware from the Support Portal (page 161)
•Updated the System Architecture Overview section. See System
Architecture Overview (page 2)
•Updated the Daisy Chaining section. See Daisy Chaining (page
220)
•Added the Rear Cover Alignment Bracket Description. See Rear
Cover Alignment Bracket (page 48)
November 2018 1.7 •Updated the images in the Daisy Chaining section. See Daisy
Chaining (page 220)
•Updated List of CRUs. See List of Customer Replaceable Units
(CRUs) (page 7)
•Updated Compatible Drives List. See List of Compatible Drives
(page 22)
•Updated the Host Connectivity section. See: SAS Cabling (page
20)
May 2019 1.8 •Changed senddiag commands from images to codeblocks. See
sg_senddiag Command (page 188).
•Updated daisy-chaining tables to match diagrams. See Two Host
Cable Configurations (page 227).
•Corrected OOBM zoning configuration instructions. See Predefined
Zoning Configurations (page 180).
•Added Configuring OOBM Network Settings Using SES (page
176).
May 2019 1.9 •Corrected the system architecture overview. See System
Architecture Overview (page 2).
•Corrected explanation of SATA configuration in Firmware Upgrade
(page 161) section.
June 2019 1.10 •Updated the Host Connectivity section. See: SAS Cabling (page
20)
•Added Windows syntax examples and reorganized the Upgrading
Firmware with OOBM section
June 2019 1.11 Updated the Host Connectivity section. See: SAS Cabling (page 20)
July 2019 1.12 Moved the following topics to the Ultrastar Data60 Description (page
2) section:
•Ultrastar Data60 Rack Requirements (page 15)
•Power Requirements (page 19)
•ESD (page 19)
•Enclosure Cooling (page 19)
vii

User Guide Revision History
Date Revision Comment
•SAS Cabling (page 20)
Moved the Supported Operating Systems (page 8) topic to the
Management (page 159) section.
Corrected LED identification tables for IOMs, PSUs, and drives in the
LEDs (page 9) section.
Updated servicing image to correct length values and rail servicing
extension in Ultrastar Data60 Rack Requirements (page 15) section.
Added a note about OOBM ports configured for DHCP by default to the
OOBM Management Overview (page 176) section.
September 2019 1.13 •Replaced references to He12 drives with Ultrastrar DC HC520 in List
of Compatible Drives (page 22)
•Changed device references from OS-specific (/dev/sgX for Linux
and SCSIX:X,X,X for Windows) to generic (<dev>) throughout.
•Updated table for Approved SAS Cables in SAS Cabling (page
20)
•Added Subenclosure Nickname (page 212) section
•Updated Supported Operating Systems (page 8)
November 2019 1.14 •Added drive assembly LED pointer orientation image in 3.5in HDD
Assembly Replacement (page 71) section
•Updated images of captive chassis-cover screws throughout
•Updated table for Approved SAS Cables in SAS Cabling (page
20)
•Updated the Daisy Chaining configurations in Daisy Chaining (page
220)
April 2020 1.15 •Corrected explanation of expanders in System Architecture
Overview (page 2)
•Added note about using non-automatic firmware activation for RAID
adpaters in Firmware Upgrade (page 161)
•Added note about performing zoning offline in Zoning (page 180)
•Added note and step for configuring zoning on an IOM after
replacement in IOM Replacement (page 59)
•Added RHEL 8.0 to Supported Operating Systems (page 8)
•Added note about LED behavior during proper drive insertion in
Drive Assembly LED (page 14)
•Corrected part number for rail kit in List of Customer Replaceable
Units (CRUs) (page 7) and Rails Specifications (page 46)
•Added note about minimum time between removing and
reapplying power in Power Connections (page 241)
August 2020 1.16 •Updated Supported Operating Systems (page 8)
•Updated SAS Cabling (page 20)
viii

User Guide Revision History
Date Revision Comment
•Updated List of Compatible Drives (page 22)
•Added File-Based Zoning (page 202) section
•Updated note in IOM Replacement (page 59) about standard vs.
file-based zoning configuration after IOM replacement
October 2020 1.17 •Fixed typo in Rails Layout (page 47)
•Updated text and color-coded images in Predefined Zoning
Configurations (page 180)
•Updated images in LEDs (page 9) and Components (page
34)
•Added note about not unzipping tar.gz file prior to firmware
upgrade in Downloading Firmware from the Support Portal
(page 161), Linux Upgrade to New Firmware (page 165), Non-
Automatic Firmware Activation in Linux (page 167), Windows
Upgrade to New Firmware (page 170), and Non-Automatic
Firmware Activation in Windows (page 173)
•Added Ubuntu 20.04 to Supported Operating Systems (page 8)
•Updated table of approved SAS cables in SAS Cabling (page 20)
•Updated FW activation step in Upgrading Firmware with OOBM
(page 178)
December 2020 1.18 •Added UK Import Representation Contact
•Removed Formerica cables from SAS Cabling (page 20)
ix

User Guide Notices
Notices
Western Digital Technologies, Inc. or its affiliates' (collectively “Western Digital”) general policy does not
recommend the use of its products in life support applications wherein a failure or malfunction of the product
may directly threaten life or injury. Per Western Digital Terms and Conditions of Sale, the user of Western
Digital products in life support applications assumes all risk of such use and indemnifies Western Digital
against all damages.
This document is for information use only and is subject to change without prior notice. Western Digital
assumes no responsibility for any errors that may appear in this document, nor for incidental or consequential
damages resulting from the furnishing, performance or use of this material.
Absent a written agreement signed by Western Digital or its authorized representative to the contrary,
Western Digital explicitly disclaims any express and implied warranties and indemnities of any kind that may,
or could, be associated with this document and related material, and any user of this document or related
material agrees to such disclaimer as a precondition to receipt and usage hereof.
Each user of this document or any product referred to herein expressly waives all guaranties and warranties
of any kind associated with this document any related materials or such product, whether expressed or
implied, including without limitation, any implied warranty of merchantability or fitness for a particular
purpose or non-infringement. Each user of this document or any product referred to herein also expressly
agrees Western Digital shall not be liable for any incidental, punitive, indirect, special, or consequential
damages, including without limitation physical injury or death, property damage, lost data, loss of profits or
costs of procurement of substitute goods, technology, or services, arising out of or related to this document,
any related materials or any product referred to herein, regardless of whether such damages are based on
tort, warranty, contract, or any other legal theory, even if advised of the possibility of such damages.
This document and its contents, including diagrams, schematics, methodology, work product, and
intellectual property rights described in, associated with, or implied by this document, are the sole and
exclusive property of Western Digital. No intellectual property license, express or implied, is granted by
Western Digital associated with the document recipient's receipt, access and/or use of this document or the
products referred to herein; Western Digital retains all rights hereto.
Western Digital, the Western Digital logo, and Ultrastar are registered trademarks or trademarks of Western
Digital Corporation or its affiliates in the US and/or other countries. Linux® is the registered trademark of
Linus Torvalds in the U.S. and other countries. All other marks are the property of their respective owners.
Product specifications subject to change without notice. Pictures shown may vary from actual products. Not
all products are available in all regions of the world.
Western Digital
5601 Great Oaks Parkway
San Jose, CA 95119
© 2020 Western Digital Corporation or its affiliates. All Rights Reserved.
x

User Guide Points of Contact
Points of Contact
For further assistance with a Western Digital product, contact Western Digital Datacenter Platforms technical
support. Please be prepared to provide the following information: part number (P/N), serial number (S/N),
product name and/or model number, and a brief description of the issue.
Email:
[e-mail]
Website:
https://portal.wdc.com/Support/s/
UK Import Representation Contact
Western Digital UK Limited Hamilton House, Regent Park, Kingston Road Leatherhead, Surrey KT22 7PL, GB,
United Kingdom
Telephone: [phone]
1.1 Product Label Information
The following product information is required for technical support requests:
•Part Number (P/N)
•Serial Number (S/N)
•Product Name and/or Model Number (MODEL)
This information may be found on the product label, which is affixed to an exterior, non-removable surface of
the chassis. The following is an example label with the applicable information fields highlighted:
xi

Western Digital
Overview
This section provides a high level overview of the features of the
Ultrastar Data60 .
In This Chapter:
- System Architecture Overview.....................2
- System Level Block Diagram.........................2
- Environmental Specifications........................3
- Electrical Specifications................................ 4
- Mechanical Specifications............................. 4
- Performance Specifications...........................5
- Ultrastar Data60 Layout................................ 6
- List of Customer Replaceable Units
(CRUs)............................................................... 6
- Supported Operating Systems......................7
- LEDs................................................................. 8
- Ultrastar Data60 Rack Requirements........... 9
- Power Requirements.................................... 15
- ESD..................................................................19
- Enclosure Cooling.........................................19
- SAS Cabling................................................... 19
- Supported SKUs........................................... 20
- List of Compatible Drives............................22
1

User Guide 1. Overview
1.1 Ultrastar Data60 Description
1.1 Ultrastar Data60 Description
Figure 2: Ultrastar Data60
The Ultrastar Data60 is a 4U form factor, high availability, high density, rack-mounted storage enclosure
that is capable of hosting up to 60 SAS or SATA drives. The maximum data storage capacity of the Ultrastar
Data60 is 840 TB using 14TB HGST Ultrastar® HC530 drives . (For a full list of compatible drives and total
storage capacities, see the List of Compatible Drives (page 22).) The enclosure runs on an input voltage
of 200 - 240 VAC and consumes ~1000W of power under typical conditions. It requires a maximum of
~1250W at full load.
It is designed to fit within a 4U rack space and requires 900mm (35.43in.) usable rack space, frame to frame.
A fully loaded system will add 79.4 kg. / 175 lbs. of static load when fully loaded with drives.
•4U Storage Enclosure
•Supports up to 60 Drives
•Can support 3.5” drives and 2.5” SSD drives (2.5" requires an adapter) in the 60 available drive bays.
•Up to 12W per drive slot for the 60 data storage drives (Cannot exceed 85A on the 5V rail)
•House and control four (4) N+1 redundant 80mm rear fans
•House and control a dual rotor 40mm internal IOM Fan
•Controlled by two (2) redundant I/O Modules1
•Powered by two (2) redundant 1600W PSUs
•Supports High Line (220-240 VAC) Input Power
•Full high availability with independent dual paths to all HDDs
•Toolless replacement of all Customer Replaceable Units (CRUs)
•Fits within a standard EIA-310 rack including all necessary cable management (see Compatible Rack
Hardware Configuration (page 17))
•Supports up to 3m passive SAS cables (limited to 3m or less) or active cables (any length) (see SAS
Cabling (page 20))
1.2 System Architecture Overview
1. SATA based models will only include 1 IOM
2

User Guide 1. Overview
1.3 System Level Block Diagram
The Ultrastar Data60 IOM uses a cascaded expander design to allow for connection to all 60 drives. A
48-port primary expander connects with the six host ports, has a x3 link to the other IOM for IOM-IOM
communication and syncing, and also has a x10 SAS link to each secondary expander. One secondary
expander then connects with fifty-one (51) drives, while the other connects with nine (9) drives.
The out-of-band management microprocessor provides an Ethernet connection using a Redfish/RESTful
API to access the various enclosure services. All the SES enclosure information can be obtained through the
out-of-band management port. Major use cases for this feature include obtaining storage subsystem health
information, locating enclosure components using the IDENT LEDs, and updating firmware.
The system FPGAs control and report the states of the system fans, enclosure LEDs, connector LEDs, drive
LEDs, and T10 drive power disable signals on the 60 data storage drives.
Note: To use T10 power disable, the drives installed must also support this feature.
The I2C architecture is designed to support only one single master on any given bus. The primary expander
will be the master on each I2C bus. There are eight I2C buses used in the Ultrastar Data60 enclosure.
The number of devices on each bus are balanced to allow communication to peripheral devices and not
overload any one bus. The devices connected on the I2C buses include the enclosure VPDs, temp sensors,
baseboard FPGAs, and SAS connectors among others.
1.3 System Level Block Diagram
The following image shows the system block diagram for the Ultrastar Data60 .
3

User Guide 1. Overview
1.4 Environmental Specifications
Figure 3: System Block Diagram
1.4 Environmental Specifications
Table 1: Environmental Specification Summary
Specification Non-Operational Operational
Temperature -40°C to 70°C 5°C to 35°C
Temperature Gradient 30°C / Hr 20°C per hour maximum
Temperature De-rating 1°C per 300m above 3000m 1°C per 300m above 900m
Relative Humidity 8-90% Non-Condensing 8-90% Non-Condensing
Relative Humidity Gradient 30% per hour maximum 30% per hour maximum
Altitude -300m to 12,000m /
-984 ft. to 39,370 ft
-300m to 3048m /
-984 ft. to 10,000 ft.
1.5 Electrical Specifications
4

User Guide 1. Overview
1.6 Mechanical Specifications
Table 2: Electrical Specifications
Specification Value
Max Power Consumption ~1250W
Typical Power Consumption2~1000W
Input Voltage 200 - 240 VAC
PSU Connector Type C14
PSU Efficiency 80 PLUS Platinum
Inrush Current Maximum (per
PSU)
AC line inrush current shall not exceed 40A peak, for up to
one-quarter of the AC cycle after which, the input current
should be no more than the specified maximum input current.
Caution: The Ultrastar Data60 can only be plugged into high line (200 - 240 VAC) power. If
the unit is plugged into low line (110-127 VAC), the PSU will report a "Critical" state when status
pages are queried using SES. In this case, the enclosure will power up, but the drives will not.
The enclosure will remain in low-power mode.
1.6 Mechanical Specifications
Table 3: Mechanical Specifications
Specification Non-Operational Operational
Shock 10G, 0 - peak,11ms half sine;
3 positive and 3 negative
pulses in each axis Shock
5G, 0 - peak, 11ms half sine; 3 positive
and 3 negative pulses in each axis-
minimum 6 seconds between shocks
to allow for write/read recovery
Vibration 0.75G, 0 - peak swept sine;
5 -500Hz; 1 complete sweep
@ 1/2 octave per minute
0.10G,0 - peak swept sine; 5
-500Hz; 1 complete sweep
@ 1/2octave per minute
Weight 79.4 kg. / 175 lbs.
Dimensions 447mm x 890mm x 175mm / 17.67in. x 35.04in. x 6.89in.
Length without CMA 712 mm / 28.03in.
Required Rack Width 450mm (17.72in.) with 465mm (18.31in.) ± 1.5mm
nominal hole spacing. See EIA-310 Rack Standard
Required Rack Depth 900mm (35.43in.) usable rack space, frame to frame
Rack Units (U) 4U
2. Max and typical power consumption values represent the output power to the system. Input power will vary depending
on the PSU efficiency and load sharing between PSUs.
5

User Guide 1. Overview
1.7 Performance Specifications
Specification Non-Operational Operational
Vertical Rack Rail
Spacing
24 in. - 32 in.
1.7 Performance Specifications
Table 4: Performance Specifications
Specification Value
Number of Drive Slots 60
Data Transfer Rates 12Gbps SAS / 6Gbps SATA
Max Raw Data Storage Capacity 840 TB using 14TB HGST Ultrastar® HC530 drives
SAS Ports 12 x Mini-SAS HD ( 6 per IOM)
2 x 10/100/1G Ethernet
1.8 Ultrastar Data60 Layout
Figure 4: Front and Rear Product Layout
Table 5: Front and Rear Component Identification
Number Component
1 Enclosure Handles
2 CMAs
3 CMA Tray
4 Rear Fans
5 PSUs
6

User Guide 1. Overview
1.9 List of Customer Replaceable Units (CRUs)
Number Component
6 Chassis Cover
7 Rear Cover Alignment Brackets
8 Rails
The following is an image of the layout of the major system components inside the Ultrastar Data60 .
Figure 5: Component Layout
1.9 List of Customer Replaceable Units (CRUs)
The following table lists the replaceable components and their part numbers.
Table 6: List of Replaceable Components
Component Part Number
Ultrastar Data60 Chassis with a single IOM and PSUs 1EX0442
Ultrastar Data60 Chassis with IOMs and PSUs 1EX0443
IOM 1EX2201
IOM Blank 1EX0431
PSU 1600W 1EX0434
Rear Fan 1EX0433
IOM Fan 1EX0432
Rails (CMA Standard) 1EX0436
Rear Cover Alignment Bracket 1EX2288
CMA Standard Arms 1EX0437
CMA Cable Tray 1EX1119
3.5 in. Drive Carrier, Qty=1 1EX0438
7

User Guide 1. Overview
1.10 Supported Operating Systems
Component Part Number
3.5 in. to 2.5 in. conversion Drive Carrier, Qty=1 1EX0439
3.5 in. Drive Blank, Qty=1 1EX0429
Power Cable for PDU, C13-C14, 18AWG, 3m, Qty=1 1EX1158
HD Mini-SAS to HD Mini-SAS, 3m, Qty=2 1EX1533
1.10 Supported Operating Systems
Table 7: Compatible Operating Systems
OS Support
2012 R2 x64 Server
2016 R1 x64 Server
Microsoft® Windows
2019 R1 x64 Server
7.2 (x86_64) Kernel: 3.10.0-327
7.3 (x86_64) Kernel: 3.10.0-514
7.4 (x86_64) Kernel: 3.10.0-693
7.6 (x86_64) Kernel: 3.10.0-957
8.0 (x86_64) Kernel: 4.18.0-80
CentOS/RedHat® Enterprise Linux (RHEL)
8.2 (x86_64) Kernel: 4.18.0-193
14.04 Kernel: 3.13
16.04 Kernel: 4.4
18.04 Kernel: 4.15
Ubuntu® Server
20.04
8.10 Kernel: 3.16Debian GNU/Linux
9.6 Kernel: 4.9
12 SP3SUSE® Linux Enterprise Server (SLES)
15 SP1
8