Westfalia 303 404 600 001 User manual

WESTFALIA-Automotive GmbH
Am Sandberg 45
D-33378 Rheda-Wiedenbrück
303 404 691 101 - 001
D
Anhängevorrichtung Montage- und Betriebsanleitung, Originalbetriebsanleitung
CZ
Závěsné zařízení Montážní a provozní návod
DK
Anhængertræk Montage- og driftsvejledning
E
Enganche Instrucciones de montaje y de servicio
F
Attelage Notice de montage et d'utilisation
FIN
Perävaunun vetolaite Asennus- ja käyttöohjeet
GB
Tow bar Installation and Operating Instructions
GR
∆ιάταξη ζεύξης Οδηγίες συναρμολόγησης και λειτουργίας
H
Vonóhorog Beszerelési utasítás
I
Gancio di traino Istruzioni di montaggio e per l'uso
N
Tilhengerfeste Monterings- og bruksanvisning
NL
Trekhaak Montage- en gebruikshandleiding
PL
Hak holowniczy Instrukcja montażu i eksploatacji
RUS
ФapкoпИнструкция по монтажу иэксплуатации
S
Dragkrok Monterings- och bruksanvisning
APPROVAL NO 55R - 01 3273
D-VALUE
MAX. VERT. LOAD
CHARGE
12,6 kN
100 kg
303 340 D
S
TYPE
CLASS
PN
A 50-X
305405
303 404 600 001 BMW X3 (F25),
BMW X4 (F26)

303 404 691 101 - 001
22
305405

303 404 691 101 - 001
7
BMW
x 20kg x+20kg
305405

303 404 691 101 - 001
88
1
2
3

303 404 691 101 - 001
9
4
5
M12x25-45 98Nm£
6

303 404 691 101 - 001
1010
7
8

303 404 691 101 - 001
25
Operating instructions for the detachable ball bar
GB
Important!
Check the following points to ensure correct locking of the detachable ball bar before each journey:
•The green marking on the handwheel is aligned with the green area on the ball bar.
•The handwheel is resting against the ball bar (no gap).
•The lock is closed and the key is withdrawn. The handwheel cannot be pulled out.
•The ball bar must be fully inserted into the receiver and be tight. Check by shaking it.
Repeat the installation procedure if any of the 4 checks is not satisfactory.
To avoid the risk of accidents the towing device should not be used if any of the requirements is not met. Contact
the manufacturer if this occurs.
The ball bar can be easily installed and removed with the normal force of your hands.
Never use any sort of aids or tools etc. as this might damage the mechanism.
Never unlock if trailers are attached or load bearing implements mounted!
Always remove the ball bar and insert the plug into the receiver for journeys without a trailer or load bearing
implement. This is especially important if the tow ball impedes sight of the vehicle’s registration number or lights.
Detachable ball bar
8
2
1
4.1 4.2
313
5b
a7
6
12
11
9
10
1 Receiver
2 Ball bar
3 Locking balls
4.1 Release ball
4.2 Release lever
5 Handwheel
6 Cover
7 Key
8 Red marking (handwheel)
9 Green marking (handwheel)
10 Green marking (ball bar)
11 Symbol (release)
12 Plug
13 Stop pin
14 No gap between 2 and 5
15 Gap of approx. 5 mm
Locked position, operating condition Unlocked position, ball bar not mounted
2
51
5
7
6
9
10
2
14
15
5
2
3
3
13
5
7
8
10
2