Westinghouse WKJS230 User manual

DISPOSAL
Proper disposal of this product.
This label indicates that, in the EU, electronic devices
cannot be disposed of with regular household waste.
Please use the return or collections systems of your municipality
or contact the seller where you purchased this product.
INFORMATION AND SERVICE
If you have question or concerns about your product, please
visit our website: www.westinghouse-starglory.com, or contact
our oversea offices/agents.
In line with our policy of continuous product development,
we reserve the right to change product, packaging and
documentation specifications without notice.
SLOW JUICER
Instructions
For household use only
5 6
¼, WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF are
trademarks of Westinghouse Electric Corporation, a USA company.
Used under license by Star Glory Limited. All Rights Reserved.
WKJS230 • 08/16
TIPS FOR JUICING
• Cut food items into small pieces for optimal extraction.
• Do not place ice or frozen fruit into the juicer. Do not push
the food down with excessive force. The food pusher is
designed to gently push food down the chute if food
becomes stuck.
• Insert food at a regular speed, allowing all the pulp to be
extracted. For maximum efciency, do not rush this process.
• When juicing leafy greens or wheat grass, it is suggested
that you mix it with fruits or other hard vegetables for
optimal results.
• The juice from fresh fruit and vegetables is high in
nutritional content. Juice from fresh fruit and vegetables is
an important part of a balanced diet.
• When selecting fruit and vegetables for juicing, always
select fresh and well ripened specimens. Fresh fruit and
vegetables carry more avour and juice than those that are
not properly ripened. Juice is best consumed when freshly
made as this is when its vitamin and mineral content is
highest.
• Your juicer can handle most varieties of fruit and vegetables.
If using fruit with hard, inedible skin (i.e. watermelons,
pineapple, mangoes etc.) always peel the skin before
placing in the juicer. The skin of citrus fruit should also
be removed before fruit is placed in the juicer. For better
tasting citrus juice, also remove the inner white peel from
the fruit. Fruits with stones or hard seeds (i.e. mangoes,
nectarines, apricots, and cherries) should be pitted before
juicing. A small amount of lemon can be added to apple
juice to prevent the juice browning.
• The juicer is not suitable for juicing very hard and starchy
fruits or vegetables such as sugar cane. When juicing fruit
and vegetables of different consistency it may help to juice
different combinations, i.e. juice soft fruit rst, (i.e. oranges)
then follow with hard fruit (i.e. apples). This will help you
achieve maximum juice extraction. If juicing herbs or leafy
vegetables, wrap them together to form a bundle before
placing in the juicer or combine them with other ingredients
on low speed.
CARE AND MAINTENANCE
WARNING: Do not immerse the motor unit in water.
ATTENTION: Always ensure that the juicer is turned off and the
power cord is unplugged from the power outlet before cleaning,
disassembling or assembling and storing the appliance.
CAUTION: Never use solvents and abrasives, hard brushes,
metallic or sharp objects for cleaning. Solvents are harmful to
health and attack the plastic parts. Abrasive cleaners and tools
scratch the surface.
1. Immediately after each use, use the cleaning brush to
thoroughly clean the fine mesh holes of the strainer. Brush
the inside of the strainer under running water, holding it
up towards the light to ensure the fine mesh holes are not
blocked.
2. If the holes are blocked, soak the filter basket in hot water
with 10% lemon juice to loosen the blocked holes.
3. Wash the other detachable parts, pulp container and juicing
cup in warm soapy water with a soft cloth. Rinse and dry
thoroughly.
NOTE: Do not place any part of the juicer in the dishwasher.
4. Discolouration of the plastic parts may occur with brightly
coloured fruit and vegetables. To help prevent this, wash
parts immediately after use. If discolouration does occur, the
plastic parts can be soaked in 10% lemon juice and water
or they can be cleaned with a non abrasive cleaner. Do not
soak the lter basket in bleach. Do not soak the motor unit.
5. Wipe the motor unit with a soft damp cloth and dry
thoroughly. Do not use abrasive scouring pads or cleaners
when cleaning the motor base as these may scratch the
surface. Wipe any excess food particles from the power
cord.
Storage
When not in use store your appliance and all its accessories and
instruction manual in a safe and dry place.
WKJS230_Slow Juicer_nIM.indd 1 8/10/2016 3:13:19 PM

4. Align the triangle on the feeding cylinder with the unlock
mark on the juice container, then rotate clockwise to the
lock mark.
5. Put juice cup under the juice mouth and the pulp container
under the slag door, put pusher on.
6. Reverse the procedure to disassemble the juicer.
Using the feeding cylinder
• Pull the button up for squeezing apples or ingredients
bigger than feeding chute. Put the ingredients into the feed
inlet and ip into juice container.
• Push down the button, and lock swivel bracket when
squeeze small volume of fruits.
Using the juice mouth
Pull out the juice mouth to adjust the quantity of juice and for
easy cleaning.
Preparing food
1. Cut food items into small pieces for optimal extraction.
2. Remove stones (plums, peaches, cherries, etc)
3. Remove tough skins (melons, pineapples, cucumbers,
potatoes, etc.)
4. Soft-skinned and other foods just need washing (apples,
pears, carrots, radishes, lettuce, cabbage, parsley, spinach,
grapes, strawberries, celery etc.)
Operation
1. Connect the power supply.
2. Push the button to “ON” position to juice fruit.
3. Press the food pusher slowly down until all fruit or
vegetables have gone through the juicer. Do not press the
food pusher rapidly.
CAUTION: Do not put your hand or any other object in the
food chute during operation.
4. The juice from the fruit and/or vegetables will ow directly
into the juice cup and the pulp will be collected in the pulp
container.
5. When juicing is complete, set the control switch to the
“OFF” position.
6. If the juice container is stuck, set the control switch to “REV”
position for 3-5 seconds. Repeat this process 2-3 times.
7. Make sure the power is turned off and the juicer is
unplugged. It is now safe to disassemble the unit.
Pusher
Feeding cylinder
Screw
Filter component
Container
Juice mouth
Pulp container
Motor unit
Juice cup
12 3 4
English
INTENDED USE
This device is suitable for extracting fruit juice only. Any other
use may result in damage to the device or injuries.
IMPORTANT SAFEGUARDS
General
1. Read this manual before rst use thoroughly. It contains
important information for your safety as well as for the use
and maintenance of the equipment. Keep these instructions
for future reference and pass it on with the device.
2. Pay particular attention to the warnings on the device and in
this instruction manual.
3. Use the device only for its intended purpose. Improper use
may lead to hazards.
4. This device is designed for household use only, not for
staff kitchen areas in shops, offices and other working
environments, farm houses, by clients in hotels, motels and
other residential type environments, bed and breakfast type
environments use. It is not suitable for commercial use.
5. In the event of improper use or wrong operation, we do not
accept any liability for resulting damages.
6. The use of accessories and components not expressly
recommended by the manufacturer may result in injuries or
damages and voids the warranty.
7. This device is not intended to be used by persons (including
children) with reduced physical, sensory or mental abilities
or lack of experience and / or lack of knowledge unless they
are supervised by a person responsible for their safety or
have received instructions on how to use the device.
8. Children should be supervised to ensure that they do not
play with the device.
9. Never leave the device unsupervised while it is switched on.
10. Do not place heavy objects on top of the device.
11. Never immerse electrical parts of the device in water during
cleaning or operation. Never hold the device under running
water.
12. Do not under any circumstances attempt to repair the
device yourself. For servicing and repairs, please consult an
authorised dealer or qualified customer service centre.
13. This device should not be operated with an external clock
timer or separate remote control system.
Power supply
1. The mains voltage must match the information on the rating
label of the device.
2. The power plug is used as the disconnect device. Please be
sure that the power plug is in operable condition.
3. Only removing the power plug can separate the device
completely from the mains supply.
4. Avoid damages to the power cord that may be caused by
kinks or contact with sharp corners.
5. Make sure, the device, including power cord and power plug
are not exposed to hot surfaces.
6. Only unplug from the power outlet by the plug itself. Do not
pull on the cord.
7. Disconnect the power plug when the device is not in use,
in case of malfunctions, prior to attaching accessories and
prior to each cleaning.
8. If the power cord or the casing of the device is damaged or
if the device is dropped, the device may not be used before
it is examined by a professional electrician.
9. A damaged power cord may only be replaced by the
manufacturer or a workshop commissioned by the
manufacturer or by a similarly qualified person in order to
avoid hazards.
Installation location
1. Place the device on a at, sturdy and heat-resistant surface.
2. Put the device in a place which is out of reach of children.
3. Do not operate this device near ammable materials (e.g.
curtains, textiles, walls) and never cover it. Ensure that
there is always a sufficient safe distance from flammable
materials.
4. Use this device in dry indoor areas only and never outdoors.
5. Warning: Do not use this device near water or heavy
moisture; e.g. in a damp basement or beside a swimming
pool or bathtub.
6. In order to reduce the risk of fire and electric shock, do not
expose the device to re (replace, grill, candles, cigarettes
and so on) or water (water drops, water splashes, vases,
tubs, ponds and so on).
7. Keep this device away from all heat sources like for example,
ovens, hot plates and other heat-producing devices/objects.
8. Protect this device from extreme heat (over 35°C) and cold
(under 5°C) as well as from direct sunlight and dust.
SPECIFIC SAFETY INSTRUCTIONS
1. Only remove accessories from the device once the motor
has come to a complete stop and the plug has been pulled.
2. Do not operate the device when it is empty in order to
prevent damages.
3. CAUTION: Do not touch any moving parts while the device
is still in operation.
4. Only use the pusher supplied, never put your fingers in the
feed tube, unplug before unblocking the feed tube.
5. Do not touch the small cutting blades of the stainless steel
filter basket.
6. Always make sure the device is properly and completely
assembled before operating. The unit cannot be switched
on unless it is properly assembled.
7. Do not overload the appliance. Products with intelligent
protection components will stop working if the appliance is
overload. Please wait for 1 minute and restart.
8. Food should be cut into small pieces to be placed in the
feeding cylinder. Please remove nuclear, hard seed, thick
skin or shell ingredients before processing.
9. This product is not suitable for processing too hard, fibers
more ingredients, such as ice, coconut, sugar cane juice,
such food is easy to get stuck, slag, lead to the damage of
components, thus affecting the service life of the product.
10. Clean the device and other accessories after each use. Refer
to the Chapter CARE AND MAINTENANCE.
BEFORE FIRST USE
Unpacking and checking
1. Carefully take the device and its accessories out of the
packaging. Retain the packaging in case you would like to
store the device away or transport it at a later date. If you
choose to dispose of the packaging, then please do so
according to the applicable legal regulations.
2. Check the packaging contents for completeness and
damages. Should the contents in the packaging not be
complete or be damaged, do not use the device. Return it to
your retail outlet immediately.
3. Clean the device and all accessories before the first use.
Refer to the chapter CARE AND MAINTENANCE.
Operating time
• Do not run the device continuously for longer than 20
minutes at a time.
• Let the device cool down to room temperature.
• Non-observance can lead to motor damage.
USING THE SLOW JUICER
Parts
1. Dust cover 7. Juice mouth
2. Pusher 8. Fruit residue screen cover
3. Feeding cylinder 9. Juice cup
4. Screw 10. Motor unit
5. Filter component 11. Cleaning brush
6. Container 12. Pulp container
Assembly and disassembly
ATTENTION:
This appliance has a built-in safety lock; this feature ensures that
you can only switch on the appliance if you have assembled the
juicer correctly on the motor unit. When assembled correctly,
the built-in safety lock will be unlocked.
Make sure the bottom of silicone plug is installed before
installing the juicer container.
1. Align the three holes on the container with the three bulges
on the motor unit.
2. Install filter components (the triangle mark on the filter must
be aligned with the one on the juice container).
3. Align juice screw with the center of lter bracket, then
rotate until it click into place.
WKJS230_Slow Juicer_nIM.indd 2 8/10/2016 3:13:20 PM