Westinghouse VR-5585DFZ User manual

USER’S MANUAL
MANUEL DE L’UTILISATEUR
MANUAL DEL USUARIO
VR-5585DFZ

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of un-insulated dangerous voltage within the products
enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
The exclamation point within an equilateral triangle is interded to aler the user to the
presence of important operating and maintenance (servicing) instruction the literature
accompanying the appliance.
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce
the risk of electric shock, do not perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.
Refer to service manual for servicing instructions.
Important Safety Instructions
Note:
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
2
IMPORTANT INFORMATION
English

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11.Only use attachments / accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15.Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, suchas vases, shall be
placed on the apparatus.
16.WARNING:To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
17.Mains plug or appliance coupler is used as the disconnect device, shall be readily operable.
3
IMPORTANT INFORMATION
English

If
the Westinghouse Customer Service.
is

6
Keep the TV dry and away from humidity.
Keep the TV away from heat sources.
Unplug the TV before cleaning it. Do not use solvent or liquid to clean
the TV.
Only clean the TV with a soft and dry cloth.
In case of troubleshooting, do not use spare parts other than those
suggested by the manufacturer. Using inadequate spare parts can
lead to electric shocks, short-circuits, fire or other incidents.
Unplug the TV during lightning storms or when unused for long periods
of time.
English
SAFETY PRECAUTIONS

CONTENTS
CONTENTS

INPUT
Blue when TV is powered on.
POWER
SWITCH
USB
(SERVICE)
TUNER
TUNER
OVERVIEW
6. OVERVIEW

POWER

VOL

VOL

CH

CH

MENU 
INPUT
Red when TV is powered off. No color when power switch
is turned off.
(Shared audio with AV IN)
AC IN and POWER SWITCH

TUNER
into AC IN
Make sure the power switch is turned on, which is located at the back of the TV.
below.

TUNER
INPUT
TV
INPUT

TUNER
TUNER
TV
TV PC the INPUT

POWER
SWITCH
USB
(SERVICE)
TUNER
USB
(SERVICE)
TUNER

INPUT
INPUT
PICTURE
Select the picture mode
SOUND
Select the sound mode
SLEEP
Set the Sleep Timer.
Displays
Displays
PICTURE SOUND SLEEP DISPLAY
INPUT
VOL+
VOL-
EXIT
MUTE
MENU
OK
ENTER
CH+
CH-
123
456
789
0
FAV
CC ASPECT MTS
set

MENU OPERATION
, then press
Use the Left and Right arrow to select your time zone. Use
Down arrow to select Next, then press Enter.
Use Up and Down arrows to select channel scan source, then
press Enter.
Please follow the Setup Wizard to scan and store channels.
You can perform the scan later if you choose to skip.
To scan now, press Enter.
Enter.
Time Zone
Time Zone

Use Up and Down arrows to select channel scan source, then
press Enter.
Are you Using a Cable/Satellite Box to connect your TV?
Use the Left and Right arrows to select the input source of
your cable/satellite box. Use Down arrow to select Next,
then press Enter.
RF (TV Tuner input) is not recommended due to its poor
quality analog signal. Use Down arrow to select Back
and choose a higher quality input source. If you do not have
a high definition output, contact your cable/satellite provider
for additional information. Or, press Enter to proceed.
Use Up and Down arrows to make selection, then press Enter.

INPUT

OK
For TV Mode: