Westinghouse VR-4030 User manual

Item checklist
Please check if the following items are completed
① The supporting components for base (has been assembled);
② Four black zinc-plated mechanical screws with mat;
Note: There could be a small difference in appearance among different models in the same series.
The actual product shall prevail
Installation Steps:
1. Take out the TV set, the base/stand and accessories from the carton.
2. Pull out the lip covering the hole of base/stand smoothly(Fig.1).
3. Insert the base/stand into the hole with the guide of the arrow mark beside the hole(Fig.2).
4. Align the screw holes on TV set back cover and the base/stand, then tighten the screws(Fig.3).
Fig.1
Plastic stand lip
Screw
Fig.3
Fig.2

1). SOURCE: press it to enter the signal source selection menu to select a signal source.
2). CH+/CH-: select the next or previous channel; in OSD menu operation, press them to select the
next or previous adjustment item.
3). VOL+/VOL-: increase or decrease the volume; in OSD menu operation, press them to adjust the
analog value of the current item.
4). MENU: press it to enter the main menu.
5). POWER.
Note: There could be a small difference in appearance among different models in the same series.
The actual product shall prevail.
1
3
4
2
5
Power Indicator
Remote Receiving Sensor
POWER
CVBS1 IN/CVBS2 IN
S-VIDEO Input Connection: Through S-VIDEO/AUDIO
cables to connect external AUDIO/VIDEO equipment to
the machine's AUDIO/VIDEO input port,and press
"SOURCE" key to select "S-VIDEO" signal source.
Y PB/CB PR/CR AUDIO -R AU DIO-L
Y PB/CB PR/CR AUDIO -R AU DIO-L
CVBS2 I N
CVBS1 I N
AUDIO-R
AUDIO-R
AUDIO -L
AUDIO -L
COAXI AL
OUT
S-VIDEO PC
AUDIO P C VGA
COMPONENT2
COMPONENT1
HDMI- 1 HDMI- 2 HDMI- 3
USB TV