Westmed VixOne User manual

UNITS - 1
ASSEMBLED IN MEXICO
CAUTION:
Do not over tighten: Stripping of the
locking mechanism may occur.
LABEL PN 75500, Rev. 01
Rx Only
Westmed
5580 S. Nogales Highway
Tucson, Arizona 85706 USA
Phone: [phone]
Fax: [phone]
www.westmedinc.com
MT Promedt Consulting GmbH
Altenhofstr. 80
66386 St. Ingbert, Germany
0397
SUGGESTED PROCEDURE:
1. These products are intended for use in delivering aerosol medications.
2. All products are to be used in accordance with the applicable prescription.
3. The VixOne is packaged preassembled. Medication may be added directly through the opening in the top of the Nebulizer
(see reverse side for assembly).
4. If preferred, the Nebulizer components may be separated to facilitate the addition of medication. To open the Nebulizer,
grip the Top, rotate the Bowl slightly until the Top is released, and pull to separate.
5. Add medication to the Nebulizer Bowl.
6. Reassemble the Nebulizer as follows: Align the Nebulizer Top with the Bowl, press the components together firmly, and
then rotate the Bowl until it locks in place. Confirm that the Top and Bowl are completely engaged to ensure optimum
performance.
7. Configure Nebulizer for application by attaching prescribed auxiliary components.
8. Only the VixOne nebulizer is top shelf dishwasher safe.
9. See reverse side for cleaning instructions.
VixOneTM Reusable Nebulizer
UNITS - 1
ASSEMBLED IN MEXICO
CAUTION:
Do not over tighten: Stripping of the
locking mechanism may occur.
LABEL PN 75500, Rev. 01
Rx Only
Westmed
5580 S. Nogales Highway
Tucson, Arizona 85706 USA
Phone: [phone]
Fax: [phone]
www.westmedinc.com
MT Promedt Consulting GmbH
Altenhofstr. 80
66386 St. Ingbert, Germany
0397 VixOneTM Reusable Nebulizer
UNITS - 1
ASSEMBLED IN MEXICO
CAUTION:
Do not over tighten: Stripping of the
locking mechanism may occur.
LABEL PN 75500, Rev. 01
Rx Only
Westmed
5580 S. Nogales Highway
Tucson, Arizona 85706 USA
Phone: [phone]
Fax: [phone]
www.westmedinc.com
MT Promedt Consulting GmbH
Altenhofstr. 80
66386 St. Ingbert, Germany
0397 VixOneTM Reusable Nebulizer
UNITS - 1
ASSEMBLED IN MEXICO
CAUTION:
Do not over tighten: Stripping of the
locking mechanism may occur.
LABEL PN 75500, Rev. 01
Rx Only
Westmed
5580 S. Nogales Highway
Tucson, Arizona 85706 USA
Phone: [phone]
Fax: [phone]
www.westmedinc.com
MT Promedt Consulting GmbH
Altenhofstr. 80
66386 St. Ingbert, Germany
0397 VixOneTM Reusable Nebulizer
UNITS - 1
ASSEMBLED IN MEXICO
CAUTION:
Do not over tighten: Stripping of the
locking mechanism may occur.
LABEL PN 75500, Rev. 01
Rx Only
Westmed
5580 S. Nogales Highway
Tucson, Arizona 85706 USA
Phone: [phone]
Fax: [phone]
www.westmedinc.com
MT Promedt Consulting GmbH
Altenhofstr. 80
66386 St. Ingbert, Germany
0397 VixOneTM Reusable Nebulizer
UNITS - 1
ASSEMBLED IN MEXICO
CAUTION:
Do not over tighten: Stripping of the
locking mechanism may occur.
LABEL PN 75500, Rev. 01
Rx Only
Westmed
5580 S. Nogales Highway
Tucson, Arizona 85706 USA
Phone: [phone]
Fax: [phone]
www.westmedinc.com
MT Promedt Consulting GmbH
Altenhofstr. 80
66386 St. Ingbert, Germany
0397 VixOneTM Reusable Nebulizer
SUGGESTED PROCEDURE:
1. These products are intended for use in delivering aerosol medications.
2. All products are to be used in accordance with the applicable prescription.
3. The VixOne is packaged preassembled. Medication may be added directly through the opening in the top of the Nebulizer
(see reverse side for assembly).
4. If preferred, the Nebulizer components may be separated to facilitate the addition of medication. To open the Nebulizer,
grip the Top, rotate the Bowl slightly until the Top is released, and pull to separate.
5. Add medication to the Nebulizer Bowl.
6. Reassemble the Nebulizer as follows: Align the Nebulizer Top with the Bowl, press the components together firmly, and
then rotate the Bowl until it locks in place. Confirm that the Top and Bowl are completely engaged to ensure optimum
performance.
7. Configure Nebulizer for application by attaching prescribed auxiliary components.
8. Only the VixOne nebulizer is top shelf dishwasher safe.
9. See reverse side for cleaning instructions.
SUGGESTED PROCEDURE:
1. These products are intended for use in delivering aerosol medications.
2. All products are to be used in accordance with the applicable prescription.
3. The VixOne is packaged preassembled. Medication may be added directly through the opening in the top of the Nebulizer
(see reverse side for assembly).
4. If preferred, the Nebulizer components may be separated to facilitate the addition of medication. To open the Nebulizer,
grip the Top, rotate the Bowl slightly until the Top is released, and pull to separate.
5. Add medication to the Nebulizer Bowl.
6. Reassemble the Nebulizer as follows: Align the Nebulizer Top with the Bowl, press the components together firmly, and
then rotate the Bowl until it locks in place. Confirm that the Top and Bowl are completely engaged to ensure optimum
performance.
7. Configure Nebulizer for application by attaching prescribed auxiliary components.
8. Only the VixOne nebulizer is top shelf dishwasher safe.
9. See reverse side for cleaning instructions.
SUGGESTED PROCEDURE:
1. These products are intended for use in delivering aerosol medications.
2. All products are to be used in accordance with the applicable prescription.
3. The VixOne is packaged preassembled. Medication may be added directly through the opening in the top of the Nebulizer
(see reverse side for assembly).
4. If preferred, the Nebulizer components may be separated to facilitate the addition of medication. To open the Nebulizer,
grip the Top, rotate the Bowl slightly until the Top is released, and pull to separate.
5. Add medication to the Nebulizer Bowl.
6. Reassemble the Nebulizer as follows: Align the Nebulizer Top with the Bowl, press the components together firmly, and
then rotate the Bowl until it locks in place. Confirm that the Top and Bowl are completely engaged to ensure optimum
performance.
7. Configure Nebulizer for application by attaching prescribed auxiliary components.
8. Only the VixOne nebulizer is top shelf dishwasher safe.
9. See reverse side for cleaning instructions.
SUGGESTED PROCEDURE:
1. These products are intended for use in delivering aerosol medications.
2. All products are to be used in accordance with the applicable prescription.
3. The VixOne is packaged preassembled. Medication may be added directly through the opening in the top of the Nebulizer
(see reverse side for assembly).
4. If preferred, the Nebulizer components may be separated to facilitate the addition of medication. To open the Nebulizer,
grip the Top, rotate the Bowl slightly until the Top is released, and pull to separate.
5. Add medication to the Nebulizer Bowl.
6. Reassemble the Nebulizer as follows: Align the Nebulizer Top with the Bowl, press the components together firmly, and
then rotate the Bowl until it locks in place. Confirm that the Top and Bowl are completely engaged to ensure optimum
performance.
7. Configure Nebulizer for application by attaching prescribed auxiliary components.
8. Only the VixOne nebulizer is top shelf dishwasher safe.
9. See reverse side for cleaning instructions.
SUGGESTED PROCEDURE:
1. These products are intended for use in delivering aerosol medications.
2. All products are to be used in accordance with the applicable prescription.
3. The VixOne is packaged preassembled. Medication may be added directly through the opening in the top of the Nebulizer
(see reverse side for assembly).
4. If preferred, the Nebulizer components may be separated to facilitate the addition of medication. To open the Nebulizer,
grip the Top, rotate the Bowl slightly until the Top is released, and pull to separate.
5. Add medication to the Nebulizer Bowl.
6. Reassemble the Nebulizer as follows: Align the Nebulizer Top with the Bowl, press the components together firmly, and
then rotate the Bowl until it locks in place. Confirm that the Top and Bowl are completely engaged to ensure optimum
performance.
7. Configure Nebulizer for application by attaching prescribed auxiliary components.
8. Only the VixOne nebulizer is top shelf dishwasher safe.
9. See reverse side for cleaning instructions.
Kit Contains: 1- Reusable VixOneTM Super SpikeTM Mask,
7’ Tubing, Pedi-NebTM, 1 - Nebulizer Compressor (Made in China)
Kit Contains: 1- Reusable VixOneTM Super SpikeTM Mask,
7’ Tubing, Pedi-NebTM, 1 - Nebulizer Compressor (Made in China)
Kit Contains: 1- Reusable VixOneTM Super SpikeTM Mask,
7’ Tubing, Pedi-NebTM, 1 - Nebulizer Compressor (Made in China)
Kit Contains: 1- Reusable VixOneTM Super SpikeTM Mask,
7’ Tubing, Pedi-NebTM, 1 - Nebulizer Compressor (Made in China) Kit Contains: 1- Reusable VixOneTM Super SpikeTM Mask,
7’ Tubing, Pedi-NebTM, 1 - Nebulizer Compressor (Made in China)
Kit Contains: 1- Reusable VixOneTM Super SpikeTM Mask,
7’ Tubing, Pedi-NebTM, 1 - Nebulizer Compressor (Made in China)

1. Wash and dry your hands.
2. Disassemble the Nebulizer .
3. Acute Care Setting: Rinse all nebulizer component parts per acute care setting
cleaning protocol.
4. Home Care Setting: Rinse or wash all nebulizer component parts in warm soapy
water. Rinse and allow to dry thoroughly.
5. Reassemble and store for next use.
.
CAUTION:
Do Not Use Vinegar. Do not boil or microwave as high temperatures may melt
some of the plastics parts.
The VixOne™ Nebulizer must be disassembled and cleaned periodically in order to
operate correctly. Westmed recommends disassembly and cleaning of all nebulizer
components at the end of each treatment.
Cleaning Instructions:
Assembly Illustration
1. Wash and dry your hands.
2. Disassemble the Nebulizer .
3. Acute Care Setting: Rinse all nebulizer component parts per acute care setting
cleaning protocol.
4. Home Care Setting: Rinse or wash all nebulizer component parts in warm soapy
water. Rinse and allow to dry thoroughly.
5. Reassemble and store for next use.
.
CAUTION:
Do Not Use Vinegar. Do not boil or microwave as high temperatures may melt
some of the plastics parts.
The VixOne™ Nebulizer must be disassembled and cleaned periodically in order to
operate correctly. Westmed recommends disassembly and cleaning of all nebulizer
components at the end of each treatment.
Cleaning Instructions:
Assembly Illustration
1. Wash and dry your hands.
2. Disassemble the Nebulizer .
3. Acute Care Setting: Rinse all nebulizer component parts per acute care setting
cleaning protocol.
4. Home Care Setting: Rinse or wash all nebulizer component parts in warm soapy
water. Rinse and allow to dry thoroughly.
5. Reassemble and store for next use.
.
CAUTION:
Do Not Use Vinegar. Do not boil or microwave as high temperatures may melt
some of the plastics parts.
The VixOne™ Nebulizer must be disassembled and cleaned periodically in order to
operate correctly. Westmed recommends disassembly and cleaning of all nebulizer
components at the end of each treatment.
Cleaning Instructions:
Assembly Illustration
1. Wash and dry your hands.
2. Disassemble the Nebulizer .
3. Acute Care Setting: Rinse all nebulizer component parts per acute care setting
cleaning protocol.
4. Home Care Setting: Rinse or wash all nebulizer component parts in warm soapy
water. Rinse and allow to dry thoroughly.
5. Reassemble and store for next use.
.
CAUTION:
Do Not Use Vinegar. Do not boil or microwave as high temperatures may melt
some of the plastics parts.
The VixOne™ Nebulizer must be disassembled and cleaned periodically in order to
operate correctly. Westmed recommends disassembly and cleaning of all nebulizer
components at the end of each treatment.
Cleaning Instructions:
Assembly Illustration
1. Wash and dry your hands.
2. Disassemble the Nebulizer .
3. Acute Care Setting: Rinse all nebulizer component parts per acute care setting
cleaning protocol.
4. Home Care Setting: Rinse or wash all nebulizer component parts in warm soapy
water. Rinse and allow to dry thoroughly.
5. Reassemble and store for next use.
.
CAUTION:
Do Not Use Vinegar. Do not boil or microwave as high temperatures may melt
some of the plastics parts.
The VixOne™ Nebulizer must be disassembled and cleaned periodically in order to
operate correctly. Westmed recommends disassembly and cleaning of all nebulizer
components at the end of each treatment.
Cleaning Instructions:
Assembly Illustration
1. Wash and dry your hands.
2. Disassemble the Nebulizer .
3. Acute Care Setting: Rinse all nebulizer component parts per acute care setting
cleaning protocol.
4. Home Care Setting: Rinse or wash all nebulizer component parts in warm soapy
water. Rinse and allow to dry thoroughly.
5. Reassemble and store for next use.
.
CAUTION:
Do Not Use Vinegar. Do not boil or microwave as high temperatures may melt
some of the plastics parts.
The VixOne™ Nebulizer must be disassembled and cleaned periodically in order to
operate correctly. Westmed recommends disassembly and cleaning of all nebulizer
components at the end of each treatment.
Cleaning Instructions:
Assembly Illustration