Whirlpool AMAP050BW User manual

For questions about features, operation/performance,
parts or service, call: 1-800-207-1156.
In Canada, for assistance, installation or service,
call: 1-800-207-1156.
Si tiene preguntas respect o a las características,
funcionamiento, rendimiento, partes o servicio técnico,
llame al: 1-800-207-1156.
Room Air Conditioner
Use and Care Guide
Table of Contents
Acondicionador de aire
para habitación
Manual de uso y cuidado
Índice
AIR CONDITIONER SAFETY ........................................... 2
INSTALLATION REQUIREMENTS................................... 3
INSTALLATION INSTRUCTIONS..................................... 5
USING YOUR AIR CONDITIONER.................................. 9
AIR CONDITIONER CARE............................................. 10
TROUBLESHOOTING.................................................... 11
ASSISTANCE OR SERVICE........................................... 13
XLS PRODUCTS WARRANTY FOR AMANA®
AIR CONDTIONERS....................................................... 14
Model/Modèle/Modelo:
AMAP050BW
®/™ ©2018 Amana. All rights reserved. Manufactured under license by XLS Products, Pennsylvania.
®/™ ©2018 Amana. Tous droits réservés. Fabriqué sous licence par XLS Products, Pennsylvania.
®/™ ©2018 Amana. Todos los derechos reservados. Fabricado bajo licencia por XLS Products, Pennsylvania.
Table des matières
SÉCURITÉ DU CLIMATISEUR....................................... 15
EXIGENCES D’INSTALLATION ..................................... 16
INSTRUCTIONS D’INSTALLATION............................... 18
UTILISATION DE VOTRE CLIMATISEUR ..................... 22
ENTRETIEN DU CLIMATISEUR .................................... 23
DÉPANNAGE .................................................................. 24
ASSISTANCE OU SERVICE........................................... 26
GARANTIE DE XLS PRODUCTS
POUR LES CLIMATISEURS AMANA®.......................... 27
Au Canada, pour assistance, installation ou service,
composez le : 1-800 207-1156.
Climatiseur
Guide d’utilisation et d’entretien
SEGURIDAD DEL ACONDICIONADOR DE AIRE ........ 28
REQUISITOS DE INSTALACIÓN ................................... 29
INSTRUCCIONES DE INSTALACIÓN ........................... 31
USO DE SU ACONDICIONADOR DE AIRE .................. 35
CUIDADO DEL ACONDICIONADOR DE AIRE............. 36
SOLUCIÓN DE PROBLEMAS........................................ 37
AYUDA O SERVICIO TÉCNICO..................................... 39
GARANTÍA DE XLS PRODUCTS
PARA ACONDICIONADORES DE AIRE AMANA®........ 40

2
AIR CONDITIONER SAFETY
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:
SAVE THESE INSTRUCTIONS
Unplug air conditioner before servicing.
Use two or more people to move and install air conditioner.
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack experience and knowledge,
unless they have been given supervision or instruction
concerning the use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance.

3
INSTALLATION REQUIREMENTS
Tools Required—All Models
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Parts Supplied
Check that all parts are included in parts package.
A. Foam seal with adhesive
strip
B. Foam seal without adhesive
strip
C.
3⁄8" screws x 4 top channel
D. ½" screws x 3 top channel
E. 3⁄4" screws x 4
F. Sash lock
G. Side curtain bracket x 2
H. Side curtains x 2
I. Top channel
Phillips screwdriver
Tape measure
Scissors
Cordless drill and
1/8" bit
Level
Pencil
Location Requirements—All Models
IMPORTANT: Observe all governing codes and ordinances.
Check the location where the air conditioner will be installed.
Make sure you have everything necessary for correct installation.
The location should provide:
■Grounded electrical outlet within 6 ft (183 cm) of where the
power cord exits the air conditioner.
NOTE: Do not use an extension cord.
■Free movement of air in room to be cooled.
■A large enough opening for the air conditioner. Installation
parts are supplied for double-hung windows.
■Adequate wall support for weight of air conditioner. Air
conditioner weighs 50 lbs to 75 lbs (22.7 kg to 34 kg).
NOTE: Cabinet louvers must not be obstructed. Air must be able
to pass freely through the cabinet louvers.
A
BCDH
I
G
E
F

4
A. 5,000 BTUs: 22" (550 mm) minimum
B. 5,000 BTUs: 14½" (368 mm) minimum
Window Installation
Window Opening Measurements:
■22" (550 mm) minimum to 35" (914 mm) maximum
opening width
■14½" (368 mm) minimum opening height
Electrical Requirements
■115 volts (103.5 min. - 126.5 max.)
■0-12 amps
■15-amp time-delay fuse or circuit-breaker
■If there is a “Single Circuit Only” label on the unit,
use on a dedicated single-outlet circuit only. If a
dedicated single-outlet circuit is not available, then
it is the customer’s responsibility to have a single-
outlet circuit installed by a qualied electrician.
■If there is no “Single Circuit Only” label on the
unit, the unit may be used on any branch circuit
of correct voltage and adequate current
protection rating.
Recommended Grounding Method
This air conditioner must be grounded. This air conditioner is
equipped with a power supply cord having a grounded 3 prong
plug. To minimize possible shock hazard, the cord must be
plugged into a mating, grounded 3 prong outlet, grounded in
accordance with all local codes and ordinances. If a mating
outlet is not available, it is the customer’s responsibility to have
a properly grounded 3 prong outlet installed by a qualied
electrical installer. It is the customer’s responsibility:
■To contact a qualied electrical installer.
■To assure that the electrical installation is adequate and
in conformance with National Electrical Code, ANSI/NFPA
70—latest edition, and all local codes and ordinances.
Copies of the standards listed may be obtained from:
National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02269
Power Supply Cord
NOTE: Your air conditioner’s power supply cord may differ from
the one shown.
This room air conditioner is equipped with a power supply cord
required by UL. This power supply cord contains state-of-the-art
electronics that sense leakage current. If the cord is crushed,
the electronics detect leakage current and power will be
disconnected in a fraction of a second.
Electrical Requirements—All Models
The electrical ratings for your air conditioner are listed on the
model and serial number label. The model and serial number
label is located on the right-hand side of the air conditioner
cabinet.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
�re, or electrical shock.
WARNING
A
B
A. Test button
B. Reset button
AB

5
Prepare Air Conditioner for Installation
NOTES:
■The Reset button must be pushed in for proper operation.
■The power supply cord must be replaced if it fails to trip when
the test button is pressed or fails to reset.
■Do not use the power supply cord as an off/on switch. The
power supply cord is designed as a protective device.
■A damaged power supply cord must be replaced with a new
power supply cord obtained from the product manufacturer
and must not be repaired.
■The power supply cord contains no user-serviceable parts.
Opening the tamper-resistant case voids all warranty and
performance claims.
INSTALLATION INSTRUCTIONS
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
■Do not use sharp instruments, rubbing alcohol, ammable
uids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your air conditioner.
■Remove any packaging materials inserted into the side
louvers.
■Dispose of/recycle packaging materials in an appropriate way.
1. Unpack the Air Conditioner
Remove Packaging Materials:
■Handle the air conditioner gently while unpacking the unit.
■Cut the 4 plastic bands that secure the carton.
■Remove the carton top and lift the air conditioner from the
base pad.
■Remove tape and glue residue from surfaces before turning
on the air conditioner. Rub a small amount of liquid dish soap
over the adhesive with your ngers. Wipe with a damp cloth
and dry.
To test your power supply cord:
1. Plug power supply cord into a grounded 3 prong outlet.
2. Pressing TEST (listen for click) button will trip and cut all
power to air conditioner.
3. Press and release RESET (listen for click; Reset button will
latch). The power supply cord is ready for operation.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
�re, or electrical shock.
WARNING
1. Place the top channel on the top of the air conditioner, lining
up the holes in the top channel with the holes in the top of the
air conditioner.
2. Using four 3⁄8" screws, attach the top channel to the air
conditioner.
2. Install top channel

6
Place the tabbed side of the side curtain in the track on the
right-hand side of the air conditioner cabinet.
Then slide the side curtain down the track until the curtain is
aligned with the top and bottom of the air conditioner cabinet.
Install Side Curtains
NOTE: Attach curtains to the air conditioner before placing the air
conditioner in window.
1. Insert side curtain in right track
Slide the side curtain frame into the top channel and bottom
channels of the air conditioner.
Repeat steps 1 and 2 for other side curtain and frame.
2. Insert curtain frame into channels
Curtain frame
Prepare Window Opening
Measure the width of the window opening (A). Mark the center
line (B) of the window on the inside windowsill.
A
B
1. Measure and mark center line
Attach the foam seal with adhesive strip to the bottom of the
window sash.
2. Attach upper foam seal
Foam seal
Tabbed side of curtain
Center line
Width of window opening

7
Install Air Conditioner in Window
IMPORTANT:
■Be sure your air conditioner does not fall out of the opening
during installation or removal.
■The place where the power cord exits the air conditioner
should be no more than 6 ft (183 cm) from a grounded outlet .
■To maximize cooling efciency and air circulation, do not
block the air intake or discharge louvers in the front panel.
■To reduce cycling on and off of the compressor and reduce
the risk of freezing up or damage to the unit, do not block the
louvers on the outside of the air conditioner.
Prepare Window with Storm Window
or Other Obstruction
Follow the steps in “Prepare Window Opening”. If possible,
remove the storm window frame or other obstruction.
If the storm window frame or obstruction CANNOT be removed,
a wood spacer will be required to ensure that the air conditioner
slopes to the outside. This will allow condensation and rainwater
to drain away.
Using a level and measuring tape, determine thickness of wood
spacer needed to allow the air conditioner to slope downward
slightly to the outdoors. The block should provide at least 1⁄2" of
height above the obstruction.
Place wood block on windowsill. Wood block should be at least
the full width of the air conditioner cabinet.
1/2"
Min.
1/2"
Min.
1. Measure size of spacer needed
A
B
C
1/2"
Min.
1/2"
Min.
E
D
2. Place wood block on windowsill
A. Wood block
B. Windowsill
C Indoors
D. Outdoors
E. Storm window frame
or other obstruction
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
A
B
C
D
1. Position air conditioner in window
Using two or more people, place the air conditioner into the
window opening and center it according to the center line
marked earlier. Check that the bottom channel of the air
conditioner is against the windowsill.
A. Air conditioner
B. Bottom channel
C Windowsill
D. Outside
C
B
A
2. Lower window sash into place
Lower the window sash behind the top channel to hold the air
conditioner in place.
NOTE: Your model may differ from the one shown.
A. Side curtain
against window
channel
B. Window sash
behind top
channel
C. Bottom
channel behind
windowsill
Spacer Obstruction

8
Attach Side Curtains to Window
The steps for installing the side curtains are the same for
both sides.
1. Extend side curtains
Extend side curtains out until they t into the window channels.
3. Install screws into window sash
Use a 1⁄8" drill bit to drill a starter hole through the holes in the top
rail and the top corners of the side curtains into the window sash.
Secure with three ½" screws through the holes in the top rail and
side curtain and into the window sash.
Complete Installation
A
B
1. Install foam seal
A. Top of lower
window sash
B. Foam seal
Insert the foam seal without adhesive strip between the top of the
lower window sash and the glass of the upper window.
Remove any remaining clear plastic lm from the control panel
and plastic front panel.
2. Plug into grounded 3 prong outlet
Plug into a grounded 3 prong outlet
Press RESET on the power supply cord. See “Electrical
Requirements.”
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
�re, or electrical shock.
WARNING
2. Secure side curtains to windowsill
Place the frame lock between the extended side curtain and the
window sill. Screw a ¾" locking screw through the frame lock and
into the window sill.

9
Operating your air conditioner properly helps you to obtain the
best possible results.
This section explains proper air conditioner operation.
IMPORTANT:
■If you turn off the air conditioner, wait at least 3 minutes
before turning it back on. This prevents the air conditioner
from blowing a fuse or tripping a circuit breaker.
■Do not try to operate your air conditioner in Cool mode
when outside temperature is below 65°F (18°C). The inside
evaporator coil will freeze up, and the air conditioner will not
operate properly.
NOTE: In the event of a power failure, your air conditioner will
operate at the previous settings when the power is restored.
Operation
Turn the Operation knob to the desired operating
mode.
■Power—Turn on air conditioner by turning mode
dial to the desired setting.
■Cool Low ( )—Cools with the fan at low speed.
■Cool High ( )—Cools with the fan at high
speed. Use this setting for maximum cooling.
■Fan Low ( )—The fan runs at low speed without cooling.
■Fan High ( )—The fan runs at high speed without cooling.
■Off—Turns the air conditioner off.
Thermostat
The thermostat will automatically control room
temperature by cycling the compressor on and off.
The fan will continue to run.
■Turn to 6 (coolest) for cooler room temperatures.
■Turn to 1 (cool) for warmer room temperatures.
■A middle setting with the knob turned to 5 is
normal for average conditions.
USING YOUR AIR CONDITIONER
Changing Air Direction
Use tab to adjust air direction
Normal Operating Sounds
When your air conditioner is operating normally, you may hear
sounds such as:
■Droplets of water hitting the condenser, causing a pinging or
clicking sound. The water droplets help cool the condenser.
■Air movement from the fan.
■Clicks from the thermostat cycle.
■Vibrations or noise due to poor wall or window construction.
■A high-pitched hum or pulsating noise caused by the modern
high-efciency compressor cycling on and off.
Use the lever on the vent louvers to adjust the air direction left or
right.

10
Your new air conditioner is designed to give you many years
of dependable service. This section tells you how to clean and
care for your air conditioner properly.
Remove the lter by grasping the tab on the lter and pulling it
out of the grille to the side.
Reinstalling the air filter:
Slide the lter back into the grille.
AIR CONDITIONER CARE
Cleaning the Front Panel
1. Turn off the air conditioner.
2. Wipe the front panel with a soft, damp cloth.
3. Air dry the front panel completely.
Cleaning the Air Filter
The air lter is removable for easy cleaning. A clean lter helps
remove dust, lint, and other particles from the air and is important
for best cooling and operating efciency. Check the lter every
2 weeks to see whether it needs cleaning.
NOTE: Do not operate the air conditioner without the lter
in place. Cooling performance will be effected when the coil
becomes dirty.
Use a vacuum cleaner to clean air lter. If the air lter is very dirty,
wash it in warm water with a mild detergent and rinse well.
NOTE: Do not wash the air lter in the dishwasher or use any
chemical cleaners; it may damage the lter. Air dry the air lter
completely before replacing to ensure maximum efciency.
Air Filter Removal
Remove the air filter