PARTNO.37-6598A
0523
PRECAUTIONS
DESCRIPTION
This wall plate assembly is designed for mounting a 70
Series vertical thermostat to the wall or to a junction box.
Thewallcoverplatecoversthejunctionbox,walldamage,
oroldthermostatmarkings.
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
BEFOREINSTALLINGOR OPERATINGTHISCONTROL COULDCAUSE
PERSONAL INJURY AND/OR PROPERTY DAMAGE.
INSTALLATION INSTRUCTIONS
Operator: Save these instructions for future use!
F61 Series
Wall Plate Assembly
To prevent electrical shock and/or equip-
ment damage, disconnect electrical power
at main fuse or circuit breaker until installa-
tion is complete.
This instruction sheet is not intended as a wiring guide.
Refer to the thermostat installation instructions to ensure
proper wiring.
NOTE
CAUTION
!
White-Rodgers is a division
of Emerson Electric Co.
www.white-rodgers.com
6-32 X
3/4
” flat-head
machine screws
1E7X
Thermostat
Subbase
F0004-1748
F61-2593 Wall Plate
Junction Box
INSTALLATION
Wall
1E7X
Thermostat
Subbase
F0004-1748
F61-2593 Wall Plate
No. 6 X 1”pan-head screws
(supplied with thermostat)
When installing wall cover plate and
thermostat directly to wall, use the
pointed screws supplied
with the thermostat.
Figure 1. Mounting 1F7X vertical digital
thermostat to vertical junction box.
Figure 2. Mounting 1E7X vertical
digital thermostat to wall.
