Whittier Wood Furniture 4752AFGMS User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 06/14
Model #
4752AFGMS
Ambierle Accent Mirror
Glazed Millstone finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition
to your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
For normal household use only. Not recommended for commercial use.
Handle the mirror with care. Glass is fragile.
Before you begin your project, completely read the Assembly
Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
WARNING
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, phone, fax, mail or email your request to the Whittier
Wood Products customer service department.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 •Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

4752AFGMS Ambierle Accent Mirror
Parts List
4752AFGMS —Page 2 —06/14
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Mirror Assembly
1
B
Mirror
1
C
Mirror Frame (attached)
1
D
Short Mirror Retainer (attached)
2
E
Long Mirror Retainer (attached)
2
F
Mirror Wall Bracket
2
(1 attached)
G
#6 x 5/8" Undercut Screw AB (inserted)
12
H
#6 x 3/4" Flat Head Screw (inserted)
4
I
#8 x 1-3/4" Pan Head Screw
2

4752AFGMS Ambierle Accent Mirror
Assembly Instructions
4752AFGMS —Page 3 —06/14
Tools Required: Phillips Screwdriver, Tape Measure, Pencil
1. Decide if you want your Mirror to hang either vertically or horizontally. If you want it to hang
horizontally, remove the Mirror Wall Bracket (F) and line it up to the predrilled holes on
the long side of the Mirror Frame (C) as in Figure 1. Attach with four #6 x 3/4" Flat Head Screws
(H).
2. Determine where you want the bottom of your mirror to end and draw a faint pencil line on the
wall. For a vertical placement, use a tape measure and measure up 29-3/8" from that mark.
Draw a faint line. For a horizontal placement, measure up 23-1/2". Draw a faint line. The top line
is where you attach the Mirror Wall Bracket (F). If you like, you can erase the faint bottom pencil
mark. See Figures 2 and 2a.
Fig. 1
C
F
H
x 4
Vertical Wall Mount
Wall
Horizontal Wall Mount
Fig. 2
Fig. 2a
Wall
29-3/8"
23-1/2"

4752AFGMS Ambierle Accent Mirror
Assembly Instructions
4752AFGMS —Page 4 —06/14
3. Locate a stud in the wall behind the space where you want to hang your Mirror. Affix the Mirror
Wall Bracket (F) into the stud with a #8 x 1-3/4" Pan Head Screws (I) insert the second screw
into one of the other holes in the bracket; if you are attaching to drywall and cannot insert the
second screw securely, purchase the proper wall attachment hardware for your type of wall and
secure the bracket. See Figure 3.
4. NOTE: The Mirror Wall Bracket (F) angles out at the top. When you hang your Mirror,
the Mirror Wall Bracket (F) fits over the angled part of the Mirror Wall Bracket (F).
See Figure 4.
Mirror Wall
Brackets (F)
(back view)
Wall
Stud
Mirror Wall Bracket (F)
(side view)
Wall
Fig. 4
Mirror Wall
Bracket (F)
(back view)
Fig. 3
Wall
F
I
F
I
x 1
x 2