Whittier Wood 2657AFGAC User manual

P.O. Box 2827
Eugene, OR 97402 USA
Outside U.S. or Canada: 541- 687- 0213Outside U.S. or Canada: 541- 687- 0213
800-653-3336800-653-3336
Fax: [phone] • Fax: [phone] • wwwwww.whittie.whittierrwood.comwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.AMail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A
For normal household use only.
recommended for commercial use.
Congratulations!
Production Code:
VN 08/08
Service Policy: We will replace parts
which are defective, missing or damaged.
Please contact Whittier Wood Products
customer service department directly (by
phone, fax, mail or E-mail) for replacement
parts.
Hours: Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order: Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
This fine piece of furniture will make a handsome
addition to your home. For the best results, start
by reading the Assembly Instructions before you
begin your project.
Unload items from this unit prior to moving.
Before loading or moving this unit, check all screws
and supports for tightness.
Do not overload drawers or shelves in this unit.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
Read the Assembly Instructions completely before
beginning your project.
Store the item: 1) in the box; 2) in a dry place; 3)
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
affect the stability of your furniture. Tighten or repair
as needed.
This Assembly requires two people.
Assembly Instructions
Model #
2657AFGAC
McKenzie
Buffet
Do not sit, stand or climb on this piece of furniture.

2657AFGAC — Page 2 — 08/08
G — Drawer Slides
— Qty. 3 sets (Installed)
A — 2657 Top Assembly
— Qty. 1 (Attached)
F — Drawer Face
E — Drawer Box
— Qty. 3 (Installed) — Qty. 3 (Installed)
B — Adjustable Shelf — Qty. 4
C — 2657 Case Only — Qty. 1
H — Knob
— Qty. 5 (Installed)
D — Door — Qty. 2 (Installed)
I – #8 x 1½" Machine Screw
— Qty. 5 (Installed)
J – Shelf Bracket
– Qty. 16 (Attached) – Qty. 52 (Inserted)
K – #6 x ½" Undercut Screw L — Hinge — Qty. 4
(Installed)
M — #6 x 3/4" Brass Flat
Head Screw — Qty. 24
(inserted)
O — Nylon Restraint Strap
— Qty. 2
N — Clip — Qty. 4 P — #8 x 2" Black Screw
— Qty. 4
Q — #8 x 1" Pan Screw
— Qty. 4
2657AFGAC McKenzie Buffet — Parts List
R — Assembled Foot
— Qty. 2 (Attached)
S — T-Nut
— Qty. 6 (Inserted)
T — Adjustable Glide
— Qty. 2 (Installed)
U — Adjustable Glide
— Qty. 4 (Installed)
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and model name.

2. Install
Rotate the Adjustable Glides found at the bottoms of the Assembled Foot (R) until the unit is level.
Doors removed for purposes of
this illustration.
the Adjustable Shelves (B) at the desired location using the Shelf Brackets (J). See Figure 2.
Attach the shelves to the shelf brackets by inserting #6 x 1/2" Undercut Screws (K) through the
bottom of the shelf bracket and into the shelf. See Figure 2a.
3. Position unit at desired location. Locate stud in the wall behind unit. Attach Clip (N) to wall stud with
#8 x 2" Black Screws (P). See Figure 3a. Attach second clip to unit with #8 x 1" Pan Head
Screws (Q). See Figure 3b. Connect the two clips with Nylon Restraint Strap (O). See Figures 3c
and 3d. If studs cannot be located, purchase proper attachment hardware for your type of wall and
secure unit according to that hardware’s instructions.
Tipping Restraint
Fig. 3a
Fig. 3c
Fig. 3d
Fig. 3b
Fig. 2
N
P
P
Q
Q
N
N
O
Fig. 2a K
J
BB
2657AFGAC McKenzie Buffet
Assembly Instructions
TOOL REQUIRED: Phillips Screwdrivier
2657AFGAC — Page 3 — 08/08