Whittier Wood 2074AFGACc User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 02/13
Model #
2074AFGACc;
2074AFCAFc
73"W McKenzie
Center Channel
Console
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
For normal household use only. Not recommended for
commercial use.
Do not climb, sit or stand on this piece of furniture.
Do not overload the drawers.
Unload items before you move this unit.
Before you load or move this unit, tighten all screws and
supports.
Handle the glass plates with care. Glass is fragile.
Before you begin your project, completely read the
Assembly Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
WARNING
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip-over:
Place heaviest items in the bottom drawers.
Unless specifically designed to accommodate, do not
set TVs or other heavy objects on top of this product.
Never allow children to climb or hang on drawers, doors
or shelves.
Never open more than one drawer at a time.
Use of tip-over restraints may only reduce but not
eliminate the risk of tip-over.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 •Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

2074AFGACc; 2074AFCAFc 73"W McKenzie Center Channel Console
Parts List
2074AFGACc_2074AFCAFc —Page 2 —02/13
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Top Assembly (attached)
1
B
Adjustable Shelf
4
C
Center Adjustable Shelf
2
Dc
Case
1
E
Removable Back (installed)
2
F
Glass Door Frame (installed)
2
G
Center Door (installed)
1
Ha
Speaker Door (attached)
1
I
Door Glass (attached)
2
J
Drawer Box (inserted)
2
K
Drawer Face (installed)
2
L
Door Glass Support Rail (attached)
4
M
Door Glass Support Stile (attached)
4
N
Shelf Bracket (installed)
24
O
#6 x 1/2" Undercut Screw (inserted)
24
Q
Butler Hinge (attached)
2
R
Magnetic Push Lock (attached)
2
S
#5 x 5/8" Flat Head Screw (inserted)
12 (AFGAC)
0 (AFCAF)
T
Magnetic Plate (attached)
8
U
#6 x 5/8" Undercut Screw (inserted)
16 (AFGAC)
64 (AFCAF)
V
Magnetic Catch (installed)
6
W
#6 x 5/8" Philtruss Screw (inserted)
42

2074AFGACc; 2074AFCAFc 73"W McKenzie Center Channel Console
Parts List
2074AFGACc_2074AFCAFc —Page 3 —02/13
Part
Description
Quantity
X
Hinge (attached)
6
Y
#6 x 5/8" Flat Head Screw (inserted)
36 (AFGAC)
0 (AFCAF)
YA
#8 x 1-3/8" Lo-Profile Screw (inserted)
6
YB
#8 x 20mm Pan Head Screw (inserted)
4
YC
Foot Bracket (attached)
1
YD
Adjustable Glide (installed)
1
ZA
Drawer Slides (pre-installed sets)
2
ZB
#6 x 3/4" Philtruss Screw (inserted)
12
ZC
#6 x 1/2" Philtruss Screw (inserted)
16
ZG
Small Adjustable Glide (installed)
4
ZI
Knob (attached)
5
ZJ
#8 x 1-1/2” Machine Screw (installed)
5
ZK
Drawer Stop (attached)
4
ZL
Turn Button (attached)
8
ZM
#6 x 3/4” Flat Head Screw (inserted)
30
ZN
#8 x 1-1/4”Pan Head Screw (inserted)
24
ZP
#8 x 1-1/4”Black Screw (inserted)
6
ZQ
#8 x 1-5/8” Black Screw (inserted)
10
ZS
Flat Washer (inserted)
2
ZT
Fitted Back (attached)
1
ZU
Chain (attached)
2
ZV
#8 x 7/8”Lo-Profile Screw (inserted)
12
ZW
#8 x 1-1/8” Lo-Profile Screw (inserted)
6
ZX
3mm x 12mm Pan Head Screw (inserted)
4
ZY
Insert Nut (inserted)
4
TR
Furniture Tipping Restraint
2 sets

2074AFGACc; 2074AFCAFc 73"W McKenzie Center Channel Console
Assembly Instructions
2074AFGACc_2074AFCAFc —Page 4 —02/13
Tool Required: Phillips Screwdriver
1. Place the console at its final destination. Rotate the Adjustable Glides (ZG) found at the corners
of the unit and (YD) at the bottom of the Center Foot until the unit is level. See Figure 1.
2. To open the Speaker Door (Ha), press both corners until the magnets release. Gently grasp the
finger groove in the top middle of the door and pull open. To shut the door, push gently but
firmly on the Speaker Door until the Magnetic Plates (T) make secure contact with the Magnetic
Push Locks (R). See Figure 2.
If you need to install your speaker from the back, remove the 18 #6 x 5/8" Philtruss Screws (W)
and pull away the Fitted Back (ZT). After installing the component, replace the Fitted Back and
attach with the 18 #6 x 5/8" Philtruss Screws (W). See Figures 2a, 2b, 2c.
Fig. 2
T
ZT
T
Ha
R
R
Fig. 2a
Fig. 2c
Fig. 2b
W
W
ZL
ZT
Fig. 1
ZG
YD
ZG

2074AFGACc; 2074AFCAFc 73"W McKenzie Center Channel Console
Assembly Instructions
2074AFGACc_2074AFCAFc —Page 5 —02/13
3. To insert your media components and access wires more easily, you may want to remove the
Removable Backs (E). To do so, unlock the Turn Buttons (ZL) as shown in Figures 3 and 3b.
Slide the Backs away and place them off to the side. After installing the components, slide the
Backs (E) behind the Drawer Stops (ZK) and lock the Turn Buttons. See Figures 3, 3a, 3b, 3c.
4. To move the Adjustable Shelves (B, C), remove the #6 x 1/2" Undercut Screws (O) and the
Shelf (B, C). Insert the Shelf Brackets (N) into the desired slots, place the shelf on top of the
brackets and insert the screws. See Figures 4 and 4a.
Fig. 4
O
N
Fig. 4a
B
Doors removed for illustration purposes.
C
B
ZK
ZL
Locked
Fig. 3
Fig. 3b
Fig. 3a
E
E
ZK
ZL
ZT
Unlocked
ZL
Fig. 3c

2074AFGACc; 2074AFCAFc 73"W McKenzie Center Channel Console
Assembly Instructions
2074AFGACc_2074AFCAFc —Page 6 —02/13
5. Tipping restraint: Locate two studs in the wall behind the unit. Attach a Clip (T1) to one wall
stud with two #8 x 2" Black Screws (T3). See Figure 5a. Attach a second clip to the unit with two
#8 x 1" Pan Head Screws (T4). See Figure 5b. Connect the two clips with the Nylon Restraint
Strap (T2). Pull the Nylon Restraint Strap (T2) tight so there is no slack. See Figures 5c and 5d.
Repeat this procedure to attach the second tipping restraint. If you cannot locate two studs,
purchase the proper wall attachment hardware for your type of wall and secure the unit.
Fig. 5a
T1
T3
Pull tight
Fig. 5d
T1
T2
T3
T4
Fig. 5c
Pull the Nylon Restraint
Strap (T2) tight
so there is no slack.
T4
T1
Fig. 5b