Whittier Wood McKenzie 1346GACd User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 06/17
McKenzie Bed Collection
GAC = Glazed Antique Cherry finish
CAF = Caffè finish
Assembly Instructions
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Unload items before you move this unit.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
Model #
1346GACd
1346CAFd
McKenzie Queen Bed
Model #
1349GACd
1349CAFd
McKenzie King Bed
Model #
1352GACd
1352CAFd
McKenzie Cal-King Bed
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

1346GACd 1346CAFd McKenzie Queen Bed
1349GACd 1349CAFd McKenzie King Bed
1352GACd 1352CAFd McKenzie Cal-King Bed
Parts List
1346GACd_1346CAFd_1349GACd_1349CAFd_1352GACd_1352CAFd — Page 2 — 06/17
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
1347GACd 1347CAFd Queen Bed (Headboard/Footboard Kit)
1350GACd 1350CAFd King Bed (Headboard/Footboard Kit)
1353GACd 1353CAFd Cal-King Bed (Headboard/Footboard Kit)
Part
Description
Quantity
A
Headboard
1
B
Footboard
1
C (1353)
Cb (1347 & 1350)
Slat
5
E
#8 x 1-1/4" Black Screw
26
(16 inserted)
H
1/4" x1/2" Hex Bolt
8
I
Male Bracket (attached)
4
J
1/4" Lock Washer
8
M
T-Nut (inserted)
5
N
5mm Hex Wrench
1
Q
Hanger Bolt (inserted)
4
U
Slat Support (attached)
1
V
#8 x 1-3/4" Pan Head Screw (inserted)
3
ZA
Adjustable Glide with Hex Nut (installed)
4
ZB
Assembled Foot
4
ZC
5/16" x 3/4" Insert Nut (inserted)
4
ZD
#8 x 1-1/4" Pan Head Screw (inserted)
4
1347 shown in illustrations.

1346GACd 1346CAFd McKenzie Queen Bed
1349GACd 1349CAFd McKenzie King Bed
1352GACd 1352CAFd McKenzie Cal-King Bed
Parts List
1346GACd_1346CAFd_1349GACd_1349CAFd_1352GACd_1352CAFd — Page 3 — 06/17
1348GACc 1348CAFc Queen/King Bed Rail Kit
1354GAC 1354CAF Cal-King Bed Rail Kit
Part
Description
Quantity
G
(
1354)
Gc (1348)
Side Rail
2
K
#8 x 1" Black Screw (inserted)
16
O
Female Bracket (attached)
4
W
#8 x 2" Black Screw (inserted)
22
1348 shown in illustrations.

1346GACd 1346CAFd McKenzie Queen Bed
1349GACd 1349CAFd McKenzie King Bed
1352GACd 1352CAFd McKenzie Cal-King Bed
Assembly Instructions
1346GACd_1346CAFd_1349GACd_1349CAFd_1352GACd_1352CAFd — Page 4 — 06/17
Tools Required: 5mm Hex Wrench (provided) and Phillips Screwdriver
1. Remove the Slats (C or Cb) from the back of the Headboard (A) as seen in Figure 1 and place
them off to the side.
2. Using the Hex Wrench (N) provided, attach the Side Rails (G or Gc) to the Headboard (A) with
four 1/4" x1/2" Hex Bolts (H) and 1/4" Lock Washers (J) as shown in Figures 2 and 2a.
H
Fig. 2
A
G or Gc
J
J
H
Fig. 2a
J
H
x 4
x 4
Fig. 1
A
Shipping Strap
C or Cb

1346GACd 1346CAFd McKenzie Queen Bed
1349GACd 1349CAFd McKenzie King Bed
1352GACd 1352CAFd McKenzie Cal-King Bed
Assembly Instructions
1346GACd_1346CAFd_1349GACd_1349CAFd_1352GACd_1352CAFd — Page 5 — 06/17
3. Using the Hex Wrench (N) provided, attach the Footboard (B) to the Side Rails with
four 1/4" x1/2" Hex Bolts (H) and 1/4" Lock Washers (J) as shown in Figures 3 and 3a.
4. Attach an Assembled Foot (ZB) to four of the five Slats (C or Cb) as shown in Figure 4.
C or Cb
Fig. 4
X 4
ZB
Fig. 3
B
H
J
Fig. 3a
J
H
x 4
x 4

1346GACd 1346CAFd McKenzie Queen Bed
1349GACd 1349CAFd McKenzie King Bed
1352GACd 1352CAFd McKenzie Cal-King Bed
Assembly Instructions
1346GACd_1346CAFd_1349GACd_1349CAFd_1352GACd_1352CAFd — Page 6 — 06/17
5. Place the bed at its final location.
6. Position the Slats (C or Cb) on the bottom edges of the rails and place the slat without the
Assembled Foot nearest to the Footboard. Attach with #8 x 1-1/4" Black Screws (E).
See Figure 6.
7. Adjust the Adjustable Glides with Hex Nut (ZA) on the Assembled Feet (ZB) so the Glides just
touch the floor, making sure the Assembled Feet bear weight.
ZA
Fig. 7
ZB
E
x 10
Fig. 6
E
C or Cb
Slat without
an
Assembled
Foot.
C or Cb
C or Cb