Whittier Wood Addison 3524DUET User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 01/18
Model #
3524DUET
Addison Lift-Top
Coffee Table
Duet = Natural finish
Assembly Instructions
IMPORTANT NOTES:
•For normal household use only. Not recommended for commercial use.
•Do not climb, sit or stand on this piece of furniture.
•Unload items before you move this unit.
•Do not overload the drawers.
•This assembly requires two people.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [email protected]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

3524DUET Addison Lift-Top Coffee Table
Parts List
3524DUET — Page 2 — 01/18
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Top Assembly (attached)
1
B
Case Assembly
1
C
Drawer (inserted)
2
D
Drawer Face (installed)
2
E
Tray Assembly (attached)
1
F
Base (attached)
1
G
16" Drawer Slide (installed sets)
2
H
#6 x 3/4" Philtruss Screw (inserted)
28
I
#6 x 1/2" Philtruss Screw (inserted)
12
J
#8 x 1-1/8" Lo-Profile Screw (inserted)
32
K
#8 x 1-1/4" Pan Head Screw (inserted)
40
L
#8 x 7/8" Black Lo-Profile Screw (inserted)
8
M
#8 x 1-3/4" Pan Head Screw (inserted)
14
N
#8 x 1-5/8" Black Screw (inserted)
19
O
#8 x 1-5/8" Machine Screw Tuscan (installed)
4
P
1/4" x 20mm Insert Nut (inserted)
4
Q
5/32" x 10mm Insert Nut (inserted)
4
R
Black Walnut Pull (attached)
2
S
Velvet Pad 100 x 38mm (attached)
4
T
Small Adjustable Glide (installed)
4
U
Lift Up Mechanism (attached)
1

3524DUET Addison Lift-Top Coffee Table
Assembly Instructions
3524DUET — Page 3 — 01/18
Tool Required: Phillips Screwdriver
1. Remove screws from the plywood supports and side aprons. Recycle or discard.
See Figure 1.
2. Firmly hold the lift top closed and turn the table upright. Place the unit at its final destination.
Rotate the Small Adjustable Glides (T) on the bottoms of the legs until the unit is level. See
Figure 2.
Continued on page 4
Fig. 2
T
T
Fig. 1
Plywood Supports

3524DUET Addison Lift-Top Coffee Table
Assembly Instructions
3524DUET — Page 4 — 01/18
3.
To remove the Drawers (C) from the Case (B), pull up on the left side of the Drawer Release
Lever while pushing down on the right Drawer Release Lever. See Figure 3 and 3a. Note where
each drawer came from to ensure correct installation.
Fig. 3
Drawer Release Lever
Fig. 3a