Wholesale Interiors BBT 1050 TALLBOY User manual

Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assemble.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provider).
MODEL : BBT 1050 TALLBOY ASSEMBLY INSTRUCTIONS HARDWARE LIST
ITEM DESCRIPTION QTY
15/16" Hex Nut 4 PCS
2M8 Flat Washer 4 PCS
3M8 Spring Washer 4 PCS
4Spanner (13mm) 1 PC
PART LIST
ITEM DESCRIPTION QTY
ALEGS 4 PCS
BHANDLE 5 PCS
CHANDLE SCREW 10 PCS
DFLAT WASHER 10 PCS
EDRAWER 5 PCS
FTALLBOY 1 PC
x 4
Inverse the night stand as picture
shown and assemble the leg.
STEP 1
Step1.1
Step1.2
Take Out Bottom Drawer
INSIDE OUTSIDE
BD
C
E
Put the bottom drawer into frame
STEP 2
1 OF 2

ASSEMBLY INSTRUCTIONS
INSIDE OUTSIDE
B
D
C
E
STEP 3 STEP 4
2 OF 2