Wholesale Interiors MD 308 LS User manual

ITEM : MD 308 LS/SF
NO PART LIST QTY
BACK REST
SIDE PANEL
(L)
SIDE PANEL
(R)
SIDE RAIL
(FRONT)
SIDE RAIL
(BACK)
LEGS
SLATS
SUPPORT
RAIL
POCKET
SPRING
SEAT CUSHION
FABRIC COVER
BLACK WOVEN
COVER
PLASTIC CAP
11
10
9
12
HARDWARE
ITEM QTY
JCBB SCREW
M8 x 20MM
JCBB SCREW
M6 x 50MM
JCBB SCREW
M6 x 80MM
L - KEY
M4 x 65MM
L - KEY
M5 x 65MM
1PC
1PC
1PC
1PC
1PC
4PCS
15PCS
1PC
30PCS
8PCS
4PCS
2PCS
1PC
1PC
2PCS
2PCS
2PCS
STEP 1
Begin assembly by attaching the arms (2) & (3) to the front side
rail (4) and back side rail (5). Then aligning holes and securing
with 2 Bolts (A) per each by using L-key (E).
STEP 2
Attach support rail (8) to the each side of side rail cleat by using
1 Bolt (B) with L-key (D) per side.
STEP 3.1
STEP 3.2
15
STEP 3
Installing the plastic cap (12) to each side of slats as shown in step 3.1 .
Then press each end of the slat to the front side rail (4) and back side rail (5) as shown in step 3.2.
Please do not tighten then hardware until the entire assembly is completed.
D
B
8
12 712
S

STEP 4
Insert the back rest metal plates to both arms (2) & (3) as shown below. Ensuring
it is correctly in place.
STEP 5
Securing with 1 Bolt (C) by using L-key (D) going throuh the pre-drilled holes on
the cleat as shown in step 5.1.
Installing the legs (6) to the
pre-drilled holes on the bottom
of arms (2) & (3).
6.2 Inserting the unpacked pocket spring (9)
to the black woven cover (11) then
inserting into seat cushion fabric cover
6.1 Unpack the pocket spring
from vacuum bag.
11
10
11
Put the seat cushion onto slats as shown below. Your assembly
is now completed.
Please do not tighten the hardware until the entire assembly is completed.