W-AIR BASIC (W-AIR 70) USER GUIDE - ENGLISH!
LOCAL CONTACTS!
Add a contact to local phonebook
1. Press Menu key and select Contacts
2. Press More Soft key -> Add contact
3. Fill in the fields, when ready, press Save Soft key
Assign a speed dial number to a local contact
1. In Contacts, select a contact that you wish to assign a speed
dial number to
2. Select More -> Speed dial
3. Select a speed dial number (from 2 to 9) that you wish to
assign to the selected contact
4. Press Add Soft key.
PLACE A CALL
Manually: Enter the number from idle and press the green Off-hook
key.
Dial a speed dial number: Make a long press (>2 seconds) from idle
on the speed dial key (from 2 to 9) assigned to the contact.
Call from call history:
1. Press Menu key and select Call list
2. Select a call from the list
3. Press the green Off-hook key
Call from shared company phonebooks
1. Press Menu key and select Central directory
2. Press Search Soft key
3. Enter the number or the name and press Selection key
4. Select a contact that you wish to call (in case a contact has
several phone numbers, a green arrow in displayed near the
contact; use Navigation keys to select the phone number)
5. Press the green Off-hook key
Shared company phonebooks must be set up by user via
Collaboration or by the PBX administrator.
VOLUME CONTROL, SPEAKER, MUTE
Mute the microphone: Press Left Navigation key to mute / unmute
the microphone.
Adjust the volume: Press Up / Down Navigation keys to adjust
volume.
Turn on the Speaker mode: Press the green Off-hook key to turn
on the speaker mode during a call. Press the green Off-hook key
twice to answer a ringing call in a speaker mode.
HOLD / SECOND CALL
Press Hold Soft key during a call to put a call on hold.
Second call: Enter the number to call or press Selection key to
access Contacts or Central directory, then press the green Off-
hook key.
Swap: when you have one active call and one call on hold, press
the Right Navigation key to swap between them.
Note: this device supports up to two active calls/ lines.
CALL TRANSFER
Blind transfer (the desired party/ extension is not notified of the
impending transfer)
1. Press"Transfer"Soft key during a call (the call is put on
hold)
2. Enter the number or press Selection key to search in
Contacts or Central directory
3. Press Transfer Soft key.
Attended transfer (the desired party/ extension is notified)
1. Press"Transfer"Soft key during a call (the call is put on
hold)
2. Enter the number or press Selection key to search in
Contacts or Central directory
3. Press the green Off-hook key
4. Press Transfer Soft key to transfer the call.
CONFERENCE CALL
1. Press Hold Soft key during a call (the call is put on hold)
2. Enter the number or press Selection key to search in
Contacts or Central directory
3. Press the green Off-hook key
4. When the third party answers, press Conf, Soft key.
ACCESS VOICEMAIL
Press Voicemail key (Key 1) and hold it for at least 2 seconds
to access Voicemail and follow the audio prompts.
PHONE AND AUDIO SETTINGS
Press Menu key and select Settings for Language settings, LED
signal, Power save, Auto-answer settings.
Press Menu key and select Audio settings for Ring volume, Ring
melody, Key sound, Coverage warning, Charger warning and other
audio settings settings.
W-AIR Basic (W-AIR 70) User Guide
full guide online
www.wildix.com
