14-SEP-2020 2/2
© 2020 Williams-Sonoma, Inc. A
Instructions d’assemblage
Instrucciones de Ensamblaje
Pottery Barn – Pottery Barn Teen – Pottery Barn Kids – Williams Sonoma Home – West Elm – Rejuvenation – Mark and Graham
CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals including Lead
which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65warnings.ca.gov.
PARTS INCLUDED
1 pc Appliance Pull
2 pcs 1/4-20 1" Truss head screw,
2 pcs 1/4-20 1-3/4" Truss head screw
MOUNTING INSTRUCTIONS
This Pull includes hardware that is designed to mount securely to drawer-fronts or cabinet doors that have a
thickness range between 1/2" and 1-1/2" inches. If you drawer- front or door is thicker or thinner than this
range, please obtain the appropriate size screw from your local hardware store.
Carefully determine a desired pull location. Use 1/4 inch diameter drill bit and appropriate drill to make the
holes through the drawer-front / door with the proper center to center distance matching your pulls. Insert
the appropriate length screws from the back of the drawer / door front, Attach the pull onto the protruding
threads of the screws. Use a screwdriver to tighten the screws while gently holding the pull.
CLEANING INSTRUCTIONS
1. Dust often using a clean, soft, dry and lint-free cloth.
2. Blot spills and wipe with a clean, damp cloth immediately.
3. We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
4. Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if necessary
