Williams-Sonoma Round Balustrade Table User manual

WILLIAMS-SONOMA
Round Balustrade Table
Assembly Instructions
• Please read all instructions carefully before assembling.
• For your safety and convenience, assembly by at least two people is recommended.
• Use the parts and hardware lists to identify and separate each of the components included.
• Save all packing materials until assembly is completed to avoid the accidental discarding of smaller parts
or hardware.
Tools :
Wrench (not included)
Parts :
(2) Feet - (A and A') (1) Leg - (B)
(1) Top - (C) (1) Extension Leaf - (D)


Page 1/4

 

Hardware :
(4) Hex Bolt M8-100mm (4) Hex Bolt M8-50mm (8) Spring Washer : 8mm
Assembly instructions :
1. Positionbothfeet(A&A')bynestingoneinsidetheother.TurnthelegBupside
down,thenputfeet(A&A )asinFig.1.Securethembyscrewing4HexBoltM8Ͳ
100mm,4springwasher(Fig.2)
(Fig.1) (Fig.2)


Page 2/4

 

2. Fix the Top (C) to Leg (B) (Fig.3) by screwing 4 Hex Bolt M8-50mm, 4spring
washer (Fig.4)
(Fig.3) (Fig.4)
3. Pull out to the maximum both semi round top (C1 & C2), then place the extension leaf (D)
between C1 and C2 (Fig.5)
(Fig.5)


Page 3/4

 

4. Use the leaf lock to lock parts C1, C2 and D together by swiching the lock (Fig.6 & Fig.7)
(Fig.6)
(Fig.7)
Care Instructions:
• Dust with a clean, soft damp cloth and wipe dry immediately.
• Avoid the use of chemicals and harsh cleaning agents.
• Use of coasters is recommended.
• Wipe dry any spills immediately



Page 4/4

