WilTec 61546 User manual

Operation Manual
Rolling Work Seat
61546
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps and technical data may deviate insignificantly due to continuous further
developments.

© by WilTec Wildanger Technik GmbH Item 61546 Page 2
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
Do you wish to collect your goods? Our address for collection is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
In order to shorten the waiting time and to allow for an easy on-site processing, we kindly ask you to
contact us briefly beforehand or to place your order via the webshop.
E-mail: [e-mail]
Phone: [phone]
Fax: [phone]
To return your goods for exchange, repair or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: [email protected]o
Phone: [phone]
Fax: [phone])

© by WilTec Wildanger Technik GmbH Item 61546 Page 3
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
•The rolling work seat is not a toy! It is not suitable for children.
•Der maximum charge capacity of the rolling work seat is 150 kg. The maximum capacity must
not be exceeded.
•Do not inflate the tyres too much. Der maximum pressure is 2.06 bar (30 psi).
•Do not use the seat on slopes. The seat could tip over.
•Do not use the rolling seat when parts are damaged or broken.
Parts list
Letter
Name
Qty.
Letter
Name
Qty.
A
Frame
1
E
Rear axles
2
B
Plastic seat shell
1
F
Rear supporting plate
1
C
Seat
1
G
Reinforcing plates
2
D
Tyres
4
H
Axle holder
4
Letter
Name
Qty.
Letter
Name
Qty.
a
Screw M8×20
4
e
Washer M12
4
b
Bolt M10×15
4
f
Nylon nuts M8
4
c
Washer M8
4
g
Nylon nuts M10
4
d
Washer M10
4
h
Nylon nuts M12
4
   
   

© by WilTec Wildanger Technik GmbH Item 61546 Page 4
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
Explosion view and assembly
Step 1
Fix the seat (C) to the upper frame with the help of the M10×15 bolts (b), the M10 washers (d), and M10
nylon nuts (g).
Step 2
Fix the front part of the plastic seat shell (B) to the front frame with the help of the reinforcing plate (G),
M8×20 screws (a), M8 washers (c), and M8 nylon nuts (f). Fix the front part of the plastic seat shell (B)
to the front frame with the help of the reinforcing plate (G), M8×20 screws (a), M8 washers (c), and M8
nylon nuts (f).
Step 3
Slide the rear axle (E) through the perforated square frame of the frame (A), then slide the axle
holder (H) on both ends of the axles before fixing the tyres (D). Fix the tyres (D) to both ends of the axles
with the help of M12 washers (e) and M12 nylon nuts (h).
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.