WilTec 51275 User manual

Operation Manual
Fruit Mill
51275, 51479, 51475
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

© by WilTec Wildanger Technik GmbH Item 51275, 51479, 51475 Page 2
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
Do you wish to pick goods up? Our pick-up address is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany
To shorten the waiting time and allow for a rapid on-site transaction, we ask you to call us previously or
placing your order via the webshop.
E-mail: [e-mail]
Tel:[phone]
Fax: [phone]
To return orders for exchange, repair or for other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: [email protected]o
Tel:[phone]
Fax: [phone]

© by WilTec Wildanger Technik GmbH Item 51275, 51479, 51475 Page 3
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Description of the product and application
•A good fruit mash is a prerequisite for producing juice, zest, or must. The mill can be used for
grinding berries, grapes, apples, pears, and potatoes, or similar soft fruits/vegetables. Hard
fruits and vegetables such as sugar beet, carrots, or unripe or hard stone fruits are not suitable
for being processed with this mill.
•Apples, pears, quince, and similar fruits are especially suitable for this crusher. The relatively
solid pulp is crushed by the mill; the resulting mash increases the juice output and enables a
pressing of the fruit.
•Grapes, raspberries, currants, and similar fruits should not be crushed –as stone fruits. This is
usually not necessary because the flesh is very soft and only surrounded by a skin. During
crushing, the seeds contained in these fruits set free bitter substances that would embrown the
juice.
•The juice quality will only be good if healthy and ripe fruits are processed. Unripe, overripe,
rotten, and cracked fruits should be discarded. Fruits with rotten or moulded spots may not be
processed. This does not include fresh pressure marks on windfalls as long as no decay has
occurred yet. Thoroughly clean the fruits with drinking water before processing them so that no
dirt enters into the mash.
Safety instructions
•The fruit mill must not be operated by children. Make sure that neither adult nor young persons
are in the danger zone while you operate the crusher.
•Make sure that you never get your hands or loose clothing in the area of rotating parts. Risk of
injury!
•The fruit mill must be securely fastened so that it cannot slip or tip over during operation.
•The hopper must absolutely be fixed.
•Only use a suitable pestle to cram, loosen, and strip the material.
•Use a suitable protective cover.
•Never reach under the protective cover during the grinding process.
Commissioning
1. Mount the drive wheel of the fruit mill.
2. Place the mill on a suitable container and make sure that it is held securely.
3. Check the direction of rotation of the drive wheel before adding fruit.
4. Fill the fruit into the hopper.
Cleaning and care
After finishing the work or before taking a longer break, thoroughly clean the mill with running water and
a suitable brush. Nevertheless, cleaning with pressurized water, e.g., hose, is more effective. Thor-
oughly clean the spaces between the grinding rollers. Bearings and surfaces should be lubricated reg-
ularly with food oil, especially after a long period of use.

© by WilTec Wildanger Technik GmbH Item 51275, 51479, 51475 Page 4
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
Explosion views and parts lists
№
Item №
Name
1
51275-01
Hopper
2
51275-02
Hand crank
3
51275-03
Base frame
4
51275-04
Pestle
5
51275-05
Handle
6
51275-06
Fixing angle
7
51275-07
Set of screws M5×4
8
51275-08
Set of screws M6×6
№
Item №
Name
1
51479-01
Hopper
2
51479-02
Set of screws St2,9×4
3
51479-03
Set of screws M6×6
4
51479-04
Base frame
5
51479-05
Hand crank
6
51479-06
Pestle
7
51479-07
Handle
№
Item №
Name
1
51475-01
Hopper
2
51475-02
Base frame
3
51475-03
Handle
4
51475-04
Set of screws M6×4
5
51475-05
Set of screws M6×6
6
51475-06
Base frame
7
51475-07
Driving crank
8
51475-08
Pestle
Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part,
of this instruction manual require the written permission of WilTec Wildanger Technik GmbH.