WINBO H231202 User manual

INSTALLATION INSTRUCTION
RUNNINH BOARD FOR VW TOUAREG
PART No. H231202
Page 1 of 2 NO. SMEN-H231202-WINBO(1)
ATTENTION
Read the instructions completely before you begin the installation. NOTE: Pictures are for reference
only, actual part may be different. Installation is the same.
You may need to periodically to re-tighten all hardware, such as one month or two month.
PART LIST
No.
Name
Qty
Remarks
No.
Name
Qty
Remarks
○
1
Running board
2
○
8
T-Bolt 2
4
M10×35
○
2
F-Mounting Brackets
2
○
9
T-Bolt 3
2
M8×35
○
3
R-Mounting Brackets
2
○
10
Big washer
2
8mm
○
4
T-Bolt 1
2
M10×35
○
11
Hex nut
2
M8
○
5
Big washer
6
10mm
○
12
Spring washer
2
8mm
○
6
Spring washer
6
10mm
○
13
Cushion plate
6
M10
○
7
Hex nut
6
M10
○
14
Cushion plate
2
M8
○
1
Chassis
Install Picture
○
2
○
4○ 5○ 6○ 7○
13
FRONT
Hardware from the running board
○
3
○
9○
10 ○ 11 ○ 12 ○ 14
○
5○ 6○ 7○ 8○
13
Chassis

INSTALLATION INSTRUCTION
RUNNINH BOARD FOR VW TOUAREG
PART No. H231202
Page 2 of 2 NO. SMEN-H231202-WINBO(1)
INSTALLATION STEPS
Step 1：Check all the contents are available in accordance with the above list.
Step 2：Install the F-mounting brackets to the vehicle using hardware as shown in FIG#1.
Step 3：Remove the factory covers as shown in FIG#2.
Step 4：Install the R-mounting brackets to the vehicle using hardware as shown in FIG#1.
Step 5：Install the running board to the mounting brackets using hardware as shown in FIG#1.
Step 6：Test and make sure that the running board is steadily fixed.
Step 7：Installation is finished.
FIG#2
Remove the factory covers