WINBO PW009532 User manual

INSTALLATION INSTRUCTION
PART# PW009532
2.5 INCH S/S SIDE BAR FOR OPEL MOKKA12+
NOTICE:
Please read the instruction completely for easy installation, which will also help you to avoid scratches
or other potential damages to your appealing car.
Please periodically check and retighten all the hardware and clean the investment for a refresh look.
PARTS LIST:
No.
Name
Qty
Remarks
No.
Name
Qty
Remarks
○
1
Side bar
2
○
7
Plastic clip
4
D8
○
2
Front bracket
2
○
8
Large washer
12
D8
○
3
Rear bracket
2
○
9
Spring washer
12
D8
○
4
Support bracket
1
○
10
Hex nut
12
D8
○
5
Connect plate
4
○
11
Square neck bolt
4
M8x25
○
6
T-bolt
4
M8x40

INSTALLATION INSTRUCTION
PART# PW009532
2.5 INCH S/S SIDE BAR FOR OPEL MOKKA12+
ASSEMBLY PROCEDURE:
Step 1: Check all the contents are available in accordance with the above list.
Step 2: Insert the welded bolt on Front bracket into the vehicle hole, then install the connect plate○
5using the hardware
○
8○ 9○
10 as Pic1, install the Front Bracket with the Support bracket on vehicle bottom using the hardware ○
6○ 7○ 8○ 9○
10
as Pic.1, then install the support bracket on vehicle bolt using hardware ○
8○ 9○
10 ，do not tighten .
Step 3: Insert the welded bolt on Rear bracket into the vehicle hole, then install the connect plate○
5using the hardware
○
8○ 9○
10 as Pic1, Install the Rear Bracket on vehicle bottom using the hardware ○
6○ 7○ 8○ 9○
10 , do not tighten .
Step4: Install the side bar on the vehicle using the hardware ○
8○ 9○
10 ○
11 as Pic1, do not tighten
Step 5: Repeat the other side. note: Support bracket only right side needed.
Step 6: After checking for proper clearance and alignment of the side bar on the vehicle, fully tighten all hardware.
Pic1
DISCLAIMER: We are not responsible for any quality problems caused by improper installation and use.
FRONT
○
1
○
2
○
3
○
4
○
8○ 9○
10 ○
11
○
8○ 9○
10
○
5
○
5
○
6○ 7○ 8○ 9○
10
○
8○ 9○
10 ○
11
○
8○ 9○
10
○
8○ 9○
10