WINBO PW003534 User manual

INSTALLATION INSTRUCTION
Part# PW003534
RUNNING BOARD FOR RANGE ROVER
Page 1 of 2 NO. SMEN-H190302-WINBO(1)A1
NOTICE:
The figures here are for reference only and may have differences with the actual product you received, however
they share the same assembly way.
Please read the instruction completely for easy installation, which will also help you to avoid scratches or other
potential damages to your appealing car.
Please periodically check and retighten all the hardware and clean the investment for a refresh look.
PART LIST:
No.
Name
Qty
Remarks
No.
Name
Qty
Remarks
○
1
Running board
2
○
9
Flat washer
8
6mm
○
2
Front mount bracket
2
○
10
Spring washer
8
6mm
○
3
Rear mount bracket
2
○
11
Spacer Plates
2
M8
○
4
T-bolt
2
M8×35
○
12
Square bolt
4
M6×20
○
5
Flat washer(BIG)
2
8mm
○
13
Flat washer
4
6mm
○
6
Spring washer
2
8mm
○
14
Spring washer
4
6mm
○
7
Hex nut
2
M8
○
15
Hex bolt
4
M6
○
8
Hex bolt
8
M6×30
○
16
Support bracket
2
○
2
○
4○
5○
6○ 7
○
3
○
1
○
12 ○ 13 ○ 14 ○ 15
○
16
The factory parts
Parts from the running board
FIG# 1

INSTALLATION INSTRUCTION
Part# PW003534
RUNNING BOARD FOR RANGE ROVER
Page 2 of 2 NO. SMEN-H190302-WINBO(1)A1
ASSEMBLY PROCEDURE:
Step1: Check all the contents are available in accordance with the above list.
Step2: Remove the factory parts, and install mount brackets to the chassis as shown in fig# 1.
Step3: Loosen the both ends bolts of the running board, install the hardware ○
12 in flute, and then install the hardware ○ 16
in running board.
Step4: Install running board to the mount brackets as shown in fig# 1.
Step5: Test and make sure that the running board is steadily fixed.