Windsor M17XI User manual

Ml7XI
HIGH SPEED BURNISHER
MODEL: M17XI
QUEST’ . .. for Continuous Improvement.
Winfsor’s Quality ManagementSystem is Certified IS0 9qPl.
b I
Operating Instructions (ENG)
lnstruccionesde manejo
(ESP)
Moded’emploi (FR)
Bedienungsanweisung (GER)
Mode de Emploi (ITA)
C€
Read instructions before operating the machine.
Antes de usar la maquina lea atentamente el librode instrucciones.
Lire atfentivement le mode d’emploi avant la mise en service de la machine.
Vorlnbetriebnahmeder Maschine Bedienungsanweisunglesen.
Leggere questeistruzioni prima
di usare la macchina.
MI 7x1 9851 5 10118/99

MACHINE DATA LOG/OVERVIEW
MODEL
DATE
OF PURCHASE
SERIAL NUMBER
SALES REPRESENTATIVE
#
DEALER NAME
OPERATIONSGUIDE NUMBER
PUBLISHED
Copyright 1995 Windsor Industries, Printedin USA
I
YOUR DEALER
Name:
Address:
Phone Number:
MI 7x1 9851 5 10118/99
2

HOW TO USE THIS MANUAL
This manualcontains the following sections:
-
- SAFETY
- OPERATIONS
- PARTSLIST
HOW TO USETHIS MANUAL
The HOW TO USETHIS MANUALsection will tell
you howto find important informationfor ordering
correct repair parts.
Parts may beorderedfrom authorizedWindsor
dealers. When placingan order for parts, the
machine model and machineserial number are
important. Refertothe MACHINEDATA box which
isfilled out duringthe installationof your machine.
The MACHINEDATA box is locatedonthe inside of
the front cover of this manual.
MODEL
DATE
OF PURCHASE
SERIAL NUMBER
SALESREPRESENTATIVE
I
DEALER NAME
OPERATIONSGUIDE NUMBER
PUBLISHED
crn**)r, IM wind- tndw. PMM I" USA
The modeland serial number of your machine ison
the bottom back
- endof the machine.
The SAFETY section contains important information
regardinghazardor unsafe practicesof the
machine. Levelsof hazardsis identifiedthat could
result in product
or personal injury,or severe injury
resultingindeath.
The OPERATIONSsection isto familiarizethe
operatorwith the operation and functionof the
machine.
The PARTSLIST section contains assembled parts
illustrationsand corresponding parts list.The parts
listsincludea number of columns of information:
-
-
-
-
-
REF - column referstothe reference
numberonthe partsillustration.
PART NO. - columnliststhe part
numberfor the part.
QTY - column liststhe quantity of the
part used inthat areaof the machine.
DESCRIPTION - column isa brief
description of the part.
SERIAL NO. FROM - column indicates
the first machinethe part number is
applicableto. Whenthe machine design
has changed, this columnwill indicate
serialnumberof applicable machine.
The mainillustrationshows the most
current designof the machine.The
boxed illustrationsshow older designs.
NOTES - columnfor information not
noted bythe other columns.
-
NOTE: If a service or option kit is installed on your
machine, be sure to keep the KIT INSTRUCTIONS
which came with the kit. It containsreplacement
parts numbers needed for orderingfutureparts.
3 M17XI 98515 10/18/99

TABLE OF CONTENTS
MachineData Log/Overview ........................ 2
HOW TO USE THIS MANUAL
How to use thisManual ................................ 3
Table of Contents ........................................ 4
SAFETY
Important Safety Instructions ....................... 5
Hazard IntensityLevel
................................. 10
GroundingInstructions ................................. 11
OPERATIONS
Operations ................................................... 12
Controls
....................................................... 15
Pad Installation
............................................ 15
Electrical Schematic
.................................... 16
Machine Troubleshooting
............................. 16
GROUP PARTS LIST
Main Housing Group ................................. 17
UpperHandle Group
................................. 19
Notes ........................................................ 21
Warranty
................................................... 22
MI 7x1 9851 5 10/18/99 4

IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precaution
must always befollowed, includingthe following:
READ ALL INSTRUCTIONSBEFORE USINGTHIS MACHINE.
To reducethe risk of fire, electric shock, or injury:
Connectto a properly groundedoutlet. See GroundingInstructions.
Useonly indoors. Do not use outdoors or expose to rain.
Duringoperation, attentionshall be paidto other persons, especiallychildren.
Use only as described inthis manual. Useonly manufacturer'srecommendedcomponents and attachments.
Do not usewith damagedcordor plug. Follow all instructionsinthis manualconcerninggroundingthe machine.
Ifthe machine is
notworking properly, has beendropped, damaged, leftoutdoors, or dropped intowater, return
it to an authorizedservice center.
Do not pullor carry bycord, usecordas a handle, close a door on cord, or pullcord around sharpedges or
corners.
Do not pull/runmachineover cord. Keep cordawayfrom heated surfaces.
Do not unplug machine by pullingoncord. To unplug, graspthe plug, not the cord.
Do not handlethe plugor machine with wet hands.
Do not operate the machinewith anyopenings blocked. Keepopeningsfree of debristhat may reduceairflow.
Machinecan causeafire when operatingnear flammablevapors or materials. Do not operatethis machinenear
flammablefluids, dust or vapors.
When leavingunattended, switch off or lock the mainpower switch to prevent unauthorizeduse.
When leavingunattended, secure againstunintentionalmovement.
This machine
is not suitablefor pickingup hazardousdust.
This machine issuitablefor commercialuse,for example in hotels,schools, hospitals,factories,shops
and officesfor morethan normalhousekeepingpurposes.
Maintenanceand repairs must be done byqualified personnel.
The machineshall only be operated by instructedand authorizedpersons.
SAVE THESE INSTRUCTIONS
5
MI 7x1 9851 5 10/18/99

INSTRUCCIONESIMPORTANTES PARA SU SEGURIDAD
Durante la utilizacion de un dispositivoelkctrico hay que tener en
cuenta una seria de medidas basicas de precaucion,que incluyen
lassiguientes:
Para reducirel riesgode incendios,descargas
elkctricas o lesiones:
Nodeje nunca el aparatoconectadoa la red. Despuesde su us0y antes de cualquier revision o reparacion,
desconectael aparatode la tomade corriente. No usar nuncaelaparatoal aire librenisobre superfivies
humedas.
No permitaque se utikicee aparato como unjugete. Hay que prestar especial atencion al utilizarloen las
cercaniasde ninos.
Utilzar el aparato
solo como se describe en este manual. Emlpear exclusivamente 10s accesorios recomendados
por el fabricante. No poner en marchael aparato con uncableelectricodeteriorado. Siel aparatonofunciona
como deberia, si se ha caido, danado,si ha permanecidoal airelibre
o si se ha caido al agua, dirijasea untaller
de servicio.
No tire del aparatoni lo transporteutilzandoel cableelectrico; nouseel cable a mod0de asa, ni cierreuna
puertacon el cable pillado; no tienda el cable entorro a aristasvivas
o esquinas.
Nopasecon el aparato por encima del cable. Mantengael cablesimpre lejos de superficies calientes. No
desconecteel enchufede la redtirando del cable. Paradesconectarel aparato hayque tirar del enchufe, nodel
cable.
No manejeel enchufeniel aparato con las manoshumedas.
No introduzca ningunodjeto en lasaberturas del aparato.
No utiliceel aparato mientrasesta bioqueadaunsdelasaberturas; evitela penetracionde polvo, hilachas, pelos
o cualquier objeto que puedainhibiela circulaciondel aire.
Mantengasu cabello, la ropa suelta,
10s dedos y todas las partesde su cuerpo alejadas de lasaberturas y piezas
en movimiento.Noutiliceel aspirador para recoger cuerpos en llamas
o humeantes, tales comocigarrilos,
cerillas
o cenzascalientes.
Desconectetodos 10s interruptoresantes de desenchufarel aspirador.
No utiliceel aspirado para recoger liquidos inflamables
o combustibles, tales como gasolina, ni manejeel
aspiradoren zonas donde pueda haber liquidosde estetipo.
CONSERVE ESTAS INSTRUCCIONESA MAN0
M17XI98515 19/18/99
6

IMPORTANTES MESURES DE SECURITE
L’utilisationd’un appareil electrique demande certaines
precautions:
LIRE TOUTES INSTRUCTIONS AVANT DE FAIRE FONCTIONNER(CET APPAREIL)
Pour reduire les risquesd’incendie, de choc electrique
ou de blessure:
Cet appareil ne doit Ctre connecter qu a des prises ayant unesortie de terre. Se reporter aux instructionde mise B
la terre.
Ne pas laisser I’appareilsans surveillance lorsqu’ilest branch& DCbrancherlorsqueI’appareiln’est pas utilisk et
avant I’entretien.
Avertissement. Pour reduire les risquesde choc electrique, ne pas utiliser
B I exterieur et ne pas aspirer de
matiCres humides.
Ne pas permettreaux enfantsdejouer avec I’appareil. UneattentionparticuliCreest nCcessairelorsqueI’appareil
est utilisC par desenfants ou
B proximitCde ces derniers.
N’utiliserque conformCment
& cette noticeavec lesaccessoires recommandCspar lefabricant.
Ne pas utiliser si lecordon ou la fiche est endommag6. RetournerI’appareil
B unatelier de rkparation s’il ne
fonctionne pas bien, s’il esttombe ou s’il a CtC endommagC, oubliC
B I’extCrieurou immerge.
Nes pastirer souleverou trainer I’appareilpas lecordon. Ne pas utiliserle cordon comme une poignke, lecoincer
dans I’embrasured’unCe porteou I’appuyercontredes arCtes vives ou des coins. Ne pas faire rouler I’appareilsur
lecordon. Garder lecordon B I’Ccart des surfaceschaudes.
Ne pasdCbrancherentirant sur le cordon.Tirer plutdtlafiche.
Ne pastoucher lafiche ou I’appareillorsquevos mainssont humides.
N’insereraucunobjet dans lesouvertures. Ne pas utiliserI’appareillorsquuneouvertureest bloquCe. S’assure
que de la poussiCre,de la peluchedes cheveux ou d’autres matiCres ne rkduisent pas ledebit d’air.
Maintenirles cheveux, lesvCtements amples, lesdoigts et toutes les partiesducorps
B I’Ccartdes ouvertures et
des pikesmobiles.
Ne pasaspirer de matiCres en combustionou qui dCgagent de lafumCe, comme des cigarettes, des allumettesou
des cendreschaudes.
Mettretoutes lescommandes
B la positionARRET avant de dCbrancher I’appareil.
Ne pas aspirer des liquides inflammablesou combustibles, commede I’essence,et ne pasfaire fonctionner dans
des endroits
oil peuventse trouver de tels liquides.
7
CONSERVER CES INSTRUCTIONS
MI 7x1 9851 5 10/18/99

WlTCHTlGE SlCHERHElTSHlNWElSE
Beim Gebrauch eines elektrishen Gerates mussen immer
grundsatzlicheVorsichtsmaanahmen beachtetwerden,
einschliefilich der folgenden:
A -
Um feuer; stromschlag oder beschadigungzu vermeiden :
m
Maschinenichtunbeaufsichtigtlassen. BeiStillstand undWartungSetckerzeihan..
Nichtim Freienoder auf nal3en Oberflache benutzen.
Die Mashcinedadnichtals Spielzeugbenutztwerden. BesondereAufmerksamkeitistgeboten, wenn die
Maschineinder Nahevon Kinern benutztwird.
Benutzungnur germal3 Betriebsanleitungundmitdem vom HerstelleremmmpfohlenenZubehor.
MaschinenichtmitbeschadigtemKabel oder stecker inbetrienehmen. Arbeitet die Maschinenichteinwandfrei,ist
sie hngefallenm beschadigt, hatsie im Freiengestandenoder istsie mitWasser in Beriihrunggekommen -
Konyaktmiteinem autorisiertenWartungsdienstaufnehmen.
Nicht am Kabelziehen, Kabel nicht als Tragegriff benutzen, nicht
in der Ture einklemmenoder uber scharfe
Eckenund Kantenziehen.
Nichtmitder Maschineuber das Kabelfahren und Kabelvon heil3en Flachenfernhalten.
Stecker nichtam Kabel herausziehen, sondern am Stecker
MaschineundStecker nichtmit naBen Handen bedienen.
Nichtder Maschine arbeitenwenn irgendeineLuftungblockiertist. Luftunsoffnungenfrei von Uberrestenhalten,
welche die Lutzirkulationbehindern.
Haare, lose Kleidung, Finger undalleanderenKorperteilevon ijffnungen undarbeitendenTeilenfernhalten.
Nichts brennendesoder qualmendes wie Zigaretten, Streichholzeroder heiBe Asche aufsaugen.
Bevor steckergezogenwird, Maschineausschalten.
Keine brennbarenoder entiindbarenMaterlalienwie Benainaufsaugenund nicht inderen Nahearbeiten.
BEACHTEN SIE DIESE HINWEISE
MI 7x1 9851 5 10118/99
8

IMPORTANTIISTRUZIONI PER LA SICUREZZA
Quandosi usa un apparecchiatura elettrica, i! necessariosempre
alcune precauzionidi base,fra cui:
Perridurreil pericolodi incedio,scosse elettrichee lesioni
personali
:
Coilegare la macchinasolamentead una presa di corrente adeguatamente messa a terra. Vedere le istruzioni
sulla messa a terra.
Nonabbandonarela macchina quandoquesta
b collegataalla pressadi corrente. Quandola macchina nonviene
usata, e prima di ogni interventodi riparazione
o manutenzione,staccare il cavo di alimentazione dalla pressadi
corrente.
Nonusarela macchinaall’aperto
o su superficibagnate.
Nonpermettereche la macchinavenga usata come giocattolo. Prestare particolareattenzione quando la
macchinaviene usatadai bambini
o vicino ad essi.
Usarela macchinasoltanto nel mod0descritto inquesto manuale. Usare solamente accessori raccomandatidalla
casa produttricedella macchina.
Nonusarela macchinacon cavie spine danneggiati. Se la macchina nonfunziona come dovrebbe,
b caduta a
terra, si
b danneggiata, b stata lasciata all’aperto o b caduta inacqua, portarlaad uncentroassistenza
autorizzato.
Nontirare
o trasportare la macchinaper il cavo, ni3 usare il cavo come manico, chiudere una portasopra il cavo a
contatto di angoli e bordi acuminati.
No usarela macchinainmovimentosopra
il cavo; tenere il cavo il cavo lontanoda superficicaide.
Non staccare la spina dalla presadi corrente tirando
il cavo. Perstaccare la spina, afferrarela spina e non il cavo.
Nonmaneggiarela spina
o la macchinacon le manibagnate.
Non infilarealcunoggetodentro le aperture. Non usare la macchinase un’apertura
b bloccata; mantenerela
macchina privadi polvere,sporco sfilacciature
o altroostacolo che riduca il flusso dell’aria.
Tenere capelli, abiti ampi, dita e ognialtra parte del corpolontanodalleaperture e dalle partiin movimento.
Non usare I’aspirapolvereper raccoglierequalcosache stia bruciando
o fumando (sigarette,flammiferi, caneri
calde).
Primadi staccare la spina dalla presadi corrente, spegneretutti
I comandidella macchina.
Nonusarela macchinaper raccogliereliquidiinflammabili
o combustibili, come la benzina, ni3 usarlainareedove
possonoesservitali liquidi.
9
CONSERVARE QUESTE ISTRUZIONI
MI 7x1 9851 5 10/18/99

HAZARD INTENSITY LEVEL
The following symbols are usedthroughoutthis guide as indicatedintheir descriptions:
HAZARD INTENSITY LEVEL
There are three levelsof hazardintensityidentifiedby signalwords - WARNING and CAUTION and FOR
SAFETY.
The levelof hazard intensity isdetermined by the followingdefinitions:
WARNING - Hazardsor unsafepracticeswhich COULDresultinsevere personalinjuryor death.
CAUTION - Hazards or unsafe practiceswhich could result in minor personal injury or product or property
damage.
FORSAFETY: To Identifyactionswhich mustbefollowed for safe operationofequipment.
Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper
operating condition. Following is information that signals some potentially dangerous conditions to the
operator or the equipment. Readthis informationcarefully. Knowwhen these conditions can exist. Locate
all safety devices on the machine. Please take the necessary steps to train the machine operating
personnel.
FORSAFETY:
DO NOT OPERATE MACHINE:
UnlessTrained and Authorized.
UnlessOperation Guide is Readand understood.
InFlammableor Explosiveareas.
Inareaswith possiblefalling objects.
WHENSERVICINGMACHINE:
Avoid movingparts.
Do notwear loose clothing;jackets,shirts, or sleeves when working on the
machine.UseWindsor approvedreplacementparts.
MI 7x1 9851 5 10/18/99
10

GROUNDINGINSTRUCTIONS
THIS PRODUCT IS FOR COMMERCIAL USE
ONLY.
ELECTRICAL:
This machine operates on a standard 6 amp
230V, 50 hz, A.C. power circuit . The amp,
hertz, and voltage are listed on the data label
found on each machine. Using voltages above
240 Volts or 220 Volts could cause serious
damageto the motors.
EXTENSIONCORDS:
If an extension cord is used, the wire size must
be at least one size larger than the power cord
on the machine, and must be limited to
50 feet
(1
5.5m) in length.
GROUNDING INSTRUCTIONS:
This appliancemust begrounded. If it should
malfunctionor break down, groundingprovides
a pathof least resistancefor electriccurrentto
reducethe risk of electricshock. This
applianceisequippedwith a cord having an
equipment
- grounding conductor andgrounding
plug. The plug must be insertedinto an
appropriateoutletthat is properlyinstalledand
groundedin accordancewith all local codes
and ordinances.
Improper connection of the equipment-
grounding conductor can result in a risk of
electric shock. Check with a qualified
electrician or service person if you are in
doubt as to whether the outlet is properly
grounded.
Do not modifythe plug provided
withthe appliance
- if it will not fit the outlet,
have a proper outlet installed by a qualified
electrician.
MI 7x1 9851 5 10/18/99

OPERATIONS OPERACION
For Indoor Use Only.
When usingthe pad, always keepthe
machine movingwhen in contactwiththe
floor.
HIGH STARTING TORQUE. HOLD MACHINE
FIRMLYWITH BOTH HANDS.
1. Ensurethat the pad is installedcorrectlyand in
good shape. Installor change pad if necessary
(See page 15 for detail of installation).
2. Plugthe machine intoa wall outlet as described
inthe groundinginstructions.
3. Lower the handle by unlockingthe adjustment
handle and movingthe handle into position. Re-
lockthe handlewhen it is ina comfortable
position.
4. Checkto besurethe pad is installedbefore
starting.
5. With the switch lock(s)rotatedforward, squeeze
one of the switchlevers, turningthe machine on.
(Theseleverscan be operatedindependentlyof
eachother)
6. To stop the machine,releasethe switch lever and
switchlock.
NOTE: Themachine is equipped witha circuit
breaker toprotect the motor in the event an overload
conditionoccurs. Thecircuit breaker is located at the
bottom of the switch housing. Push theresetbutton
torestartthe machine.
If the breaker tripsagain,
correct the cause of overloadingbeforeproceeding.
7. Do not let machinereston pad.Whenfinished
with machinefor the day returnhandleto the
storage position. Be sure to machine
in a safe
placewhere there is no risk of beingtipped.
Cuando use la cepillo, mantengasiempre la
maquinaen movimiento mientrasestC
tocando el piso.
ALTA POTENCIA DE ARRANQUE. SUJETE
LA MAQUINA FIRMEMENTECON AMBAS
MANOS.
1.
2.
3.
4.
5.
6.
Asegdrese de que el estC instalado
correctamentey en buenascondiciones. lnstale
o cambielaalmo hadillasies necesario. (Vea
en la pagina
15 10s detalles de la instalacion).
Enchufela mdquinaa untomacorrienteen la
forma descritaen las instruccionessobred
conexiona tierra.
Bajela empufiaduradestrabandoel ajuste de la
mismay movikndola hastala posici6ndeseada.
Vuelva a trabar la empuiiadura cuandollegue a
Una posici6nc6moda para usted.
Antes de empezar. Compruebe si estd instalado
elcepillo.
DespuCsde hacergirar haciaadelanteel cierre
del interruptor,oprimauna de las palancasdel
interruptory encienda la mdquina. (Estas
palancasse puedenoperar in
dependientementeunda de otra).
Paradetener la mAquina, suelta la palancay el
cierre del interruptor.
NOTA: La mhquina esth equipada con un diyuntor
de circuit0para proteger el motor en caso de
sobrecarga.El disyuntor se encuentra en el fondo
de la cajadel interruptor. Oprimael bothde
reposicihpara volver a arrancarla mhquina. Si el
interruptor se vuelve a disparar, corrijala causa de
la sobrecarga antes de proseguir.
7. No dejeque la mdquina descanse sobre la
almonadilla. Cunadoterminede trabajarcon la
mdquina, regresela empuiiadura a la posici6nde
almacenamiento.Asegdrese de dejar la mdquina en
un lugar seguro donde no haya riesgode que se
voltee.
M17XI 98515 10/18/99 I2

FONCTIONNEMENT BETRIEB
Utilisation a I’intCrieur uniquement. Nur fiir den Innenraum.
En cas d’utilisationde disque, toujours
maintenir la machineen mouvement
lorsqu’ele est en contact avec le sol.
OUPLE ELEVE DE DEMARRAGE. TENIR LA
MACHINEFERMEMENTDES DEUX MAINS.
1. Verifier que le porte - disqueen placeet en bon
ktat. Mettreundisque en place ou le remplacer
si nCcessaire
(Voir la page 15 pour des dCtails
sur lamise en place).
2. Brancherle cordon de la machinedans une prise
murale,comme indiquk dans les instructionsde
mise
B laterre.
3. Abaisser le mancheenledkverrouillantet en le
dkplacantjusqu’hce qu’il soit dans une position
confortable, puis le reverrouillerdans cette
position.
4. Verifier que le porte
- disqueen palceavant de
mettre la machineen marche.
5. Tourner le(s)verrous(s) d’interrupteurvers
I’avant, puis presser I’un des leviers
d’interrupteur, ce qui metla machineen marche.
(Ces leviers peuventCtre actionnCs
independammentI’un de I’autre.)
6. PourarrCter la machine, reldcher lelevieret le
verrou d’interrupteur.
REMARQUE: La machine estkquipke d’un
disjoncteur quiprotege le moteur en cas de
surcharge. Cedisjoncteurse trouveau bas du
boitier d’interrupteur.Appuyer sure le bouton de
rkarmementpour remettrela machine en marche. Si
le disjoncteurse redkclenche,corriger le problkme
quie causela surcharge avant de continuer.
7. Ne pas laisser la machinereposersur le disque.
A lafin de lajournCe de travail, ramenerle
mancheen positionderangement. Veiller B
mettre la machineen lieusOr, dans unendroit oil
elle ne risque pasd’Ctre renversCe.
Wenn Sie die Polsteroption,bewegen Sie
die Maschine bei Kontaktmit dem Fuaboden
kontinuierlich.
HOHE DREHKRAFTBE1
MASCHINENSTART.HALTENSIE DIE
MASCHINE FEST MITBEIDEN HANDEN.
1.
2.
3.
4.
5.
6.
VergewissernSiesich, daa der polsterantrieb
korrektinstalliertund intaktsind. lnstallieren
oder wechsein Sie das Polsterwenn notigaus
(sieheSeite 15 fur weitere Einzelheiten).
Schlieden Siedie Maschinean eineWandsteck
dosean, wie inden Erdungsanweisungen
beschrieben.
ErniedrigenSieden Griff, indem Sie den
Einstellungsgriffentsperren und den Griffindie
position bewegen. Sperren Sieden Griff, wenn
er sich ineiner bequemenPosition befindet.
VergewissernSie sich, dadder Polsterantrieb
installiertsind, bevor Sie die Maschinestarten.
Wenn die Schaltsperre(n) nachvorne gedreht
ist/sind,driickensie einen der Schalterhebel und
schalten Sie die Maschineein. (Diese Hebel
konnenunabhangigvoneinander betrieben
werden.)
Urn die Maschineanzuhalten, lassenSieden
Schalterhebelund die Schaltsperre 10s.
HINWIES:Die Maschine ist mit einem
Uberlastschalterausgestattet,um denMotor im falle
einer Uberlastung zu schutzen. Der Uberlastschalter
befindet sich im unteren Teilder Schalterge hauses.
DriickenSie auf die TasteRESET, um die Maschine
neu
su starten. Wennder Uberlastschaltererneut
ausschaltet, sollten Sie die Ursache fiir die
Uberlastungbeheben, bevor Sie forffahren.
7.
LassenSiedie Maschinenichtauf dem Polster
sitzen. Wenn sie dieTagesarbeit mit der
Maschinebeendethaben, setzensie den Griff
wieder zuriick indie Lagerposition.StellenSie
sicher, daljsichdie Maschinean einem
sicherenOrt befindet, an dem sie nicht
umkippenkann.
M17XI98515 10/18/99
13

FUNZIONAMENTO
Solo per us0interno.
Quandosi utiliuadel cuscino, mantenere
sempre la macchina inmovimento quando
S
a contattocon il pavimento.
ALTA COPPIA DIAWIAMENTO. TENERE LA
MACCHINASALDAMENTECON AMBEDUE
LE MANI.
1. Assicurarsi che la guida del cuscinetto installata
correttamentee in buonaforma. lnstallare
o
cambiare il cuscino, se necessario. (Verderela
pag.
15 per I dettagli sull’installazinoe.)
2. lnserirela spina elettricadella macchinainuna
presaa muro, come descritto nelle istruzioniper
il
collegamentocon la massa.
3. Abbassare I’impugnatura,sbloccando la
manopola di regolazione e muovendo
I’impugnaturain posizione. Bloccaredi nuovola
manopola quando si
b travata una posizione
comoda .
4. Primadi avviviare la macchina,assicurarsi che il
comando del cuscinetto sia installata.
5. Con I fermi dell’interruttoreruotati inavanti,
premere una dellelevedell’interruttore, per
metterela macchinainfunzione (questeleve
possonoesserefatte funzionare
indipendentementeuna dall’altra.)
bloccodelI’interruttore.
6. Perarrestare la macchina,rilasciarela leva e il
NOTA: Lamacchina2equipaggiatadi uninferrutore
principale,per proteggere
il motore dauna
condizionedi eccessivocarico.
L ’interruttore
principale
2 sifuato sul fondodell’alloggiamento
dell’interruttore.Premere
il pulsante diripristinoper
riawiare la macchina. Se I’interruttore principale
scattaancoradopo
il ripristino, correggere le cause
del sovraccarico.
7. Nonlasciare la macchina inriposa con il cuscino
installato. Quando
il lavorocon la macchina 5
terminato per la giornata riportareI’impugnatura
in posizionede conservazione.Assicurarsi di
lasciare la macchina inunluogo riparatodove
noncorra
il rischiodi subire urti.
MI 7x1 9851 5 10/18/99 14

CONTROLS & PAD INSTALLATION
CONTROLS
A.
B.
C.
D.
E.
Switchlocks
Cierresdel interruptor
Verrous d'interrupteur
Schaltsperren
Blocchidell'interruttore
SwitchLever
Palancade interruptor
Levier d'interrupteur
Schalthebel
Levadell'interruttore
SolutionLever (optional)
Palanca para rociarsolucion(opcional)
Levierde solution(optional)
Hebelfiir Reinigungslosung(wanlweise)
Levadi solucion(optionall)
CircuitBreaker
Disynutor
Disjoncteur
Uberlastschalter
Circuit0principale
DetachableCord
Cordonede Prolongaci6n
Rallonge
Verlangerungska
be1
Cavidi Estensione
PAD INSTALLATION
Ensurepad is centered on paddriver. Pull padto
edge
of Paddriver in severaldirectionsto checkfor
properengagement.
Asegdrese de que la almohadillaesthcentrada
sobre el accionador. Tire de laalmohadillahastael
bordedel accionador en varias direccionespara ver
si estfibienenganchada.
Vkrifierque ledisque est centr6dans le portedisque.
Tirer ledisquevers le bordde celui-ci dans plusieurs
sens pour s'assurer qu'il est bien enclench&
Vergewissern Sie sich, daf3 das Polsteraufdem
Polstergetriebezentriertsitzt.ZiehenSiedas Polster
biszum Randdes Polstergetriebesinvarschiedene
Richtungen,urn eine korrekteEinlagerungzu
gewahrleisten.
Assicurarsiche
il cuscinosia centratosul comando.
Tirare il cuscinoverso il bordo del comando in
svariatedirezioni per controllarese
2 inserito
correttamente.
I
M17XI98515 10/18/99

TROUBLESHOOTING & WIRINGDIAGRAM
TROUBLESHOOTING
PROBLEM.
I
No powerto machine
b
e Electricalshock
Circuit breakertripping
Loose handle
CAUSE
S 0 LU T I0 N
Deadelectricalcircuit
breaker of fuse box.
Powerswitchfailure.
Faultycircuit breaker.
Faultypower cord.
Equipmentnotgrounding
Receptaclenot grounded.
Internalwiring problem.
~
Faultycircuit breaker.
Mechanicalproblem.
Pad problem.
Nut not properlytightened.
Check buildingcircuit.
Test switchfor continuityand replace if necessary.
Replace.
Replace.
Followgrounding instructionsexactly.
Havean electricianinspectbuildingswiring.
Ensurethat the machineswiring matches the
appropriatewiring diagram. Replaceany wires or
componentswhich are short circuiting.
Test circuit breakerfor continuity. Replacecircuit
breaker
if necessary.
Higheramp draws indicatea mechanicalproblem,
find the partswhich are not movingas freely as they
should. and reDair
or reolace.
Pad loadedupwith dirt and/orfinish. Changepad.
Tighten nut (p/n
57201 on handleasm) by turning 1/2
turnwhile holding handlewith a wrench. -
-
WIRING DIAGRAM
BOTTOM
HOUSING
MOTOR
ERN k-$>
880064
It
M17XI98515 10/18/99
16

MI 7x1 9851 5 10/18/99
d7
Adjustment Handle Asm (38268) I

MAIN ASSEMBLY PARTS LIST
MI 7x1 9851 5 10/18/99
18

HANDLE ASSEMBLY PARTS
.19
8
6
21
18
MI 7x1 9851 5 10118/99

HANDLEASSEMBLY PARTS LIST
MI 7x1 9851 5 1011 8/99
20