Winsome house WHIF384 User manual

Product Name:
Bathroom Wall Storage Cabinet in White
SKU #:
WHIF384
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Thank you for purchasing this Winsome House product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
Hardware:
Tools required for assembly: Philips screwdriver and Flathead Screwdriver (if using power tools, use with care)
1 ×10 2 ×10
7 ×6 8 ×2
3 ×2 4 ×12 5 ×1 6 ×1
9 ×6 10 ×2
13 ×15
11 ×4 12 ×20
(φ4x12mm)
(φ3x15mm)
(φ2.5x10mm)
1:00

Product Name:
Bathroom Wall Storage Cabinet in White
SKU #:
WHIF384
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Panels:
A
E
H
J
C
C
B
I
D
D
K
L
G
E
F

Product Name:
Bathroom Wall Storage Cabinet in White
SKU #:
WHIF384
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 1
Make sure the pins are installed correctly as shown with the “check mark” below:
Below shows how the pins are used to assemble the panels together.
FIGURE A
The above image shows the hardware
needed for Step 1.
a b c
1 ×4
2 ×4
9 ×4

Product Name:
Bathroom Wall Storage Cabinet in White
SKU #:
WHIF384
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Assemble the base of the cabinet (best to prepare on an open flat (soft) surface):
Insert pins (1) and lock screws (2) as shown in Figure A.
C
C
A
D
B
D

Product Name:
Bathroom Wall Storage Cabinet in White
SKU #:
WHIF384
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 2
Assemble shelves (E and F) as shown below. These shelves are not adjustable.
E
E
A
12 ×8
F

Product Name:
Bathroom Wall Storage Cabinet in White
SKU #:
WHIF384
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 3
Repeat Step 1 for panels G. Refer to Figure A for assembly guide for inserting pins and locknuts.
G
1 ×3

Product Name:
Bathroom Wall Storage Cabinet in White
SKU #:
WHIF384
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 4
Assemble shelf (G) as shown below.
A
B
G
2 ×3
12 ×6

Product Name:
Bathroom Wall Storage Cabinet in White
SKU #:
WHIF384
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 5
Add pins to the bottom of panel top H.
H
1 ×3

Product Name:
Bathroom Wall Storage Cabinet in White
SKU #:
WHIF384
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 6
Assemble the top of the cabinet (H) to the top portion of the cabinet (assembled panels A and B).
H
2 ×3
12 ×6

J
I
7
13
Product Name:
Bathroom Wall Storage Cabinet in White
SKU #:
WHIF384
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 7
Screw in Panel I, J, and part 8 to back of panels A, B and H.7 ×6
8 ×2
13 ×15

Product Name:
Bathroom Wall Storage Cabinet in White
SKU #:
WHIF384
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 8
Assemble the hinges and door knob to the door K.
6
4
3
5
K
6 ×1
5 ×14 ×43 ×2

Product Name:
Bathroom Wall Storage Cabinet in White
SKU #:
WHIF384
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 9
Assemble the door to the cabinet (door opens to the right).
4 ×8
b
a
abc
c
4
K

Product Name:
Bathroom Wall Storage Cabinet in White
SKU #:
WHIF384
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 10
Right Shelf (enclosed storage area) is adjustable, and may be placed in a few options on the closed storage side.
First install the brackets (#11) inside the cabinet for where you want the shelf. To insert shelf into the cabinet, tilt
it at angle first to get it into the cabinet.
Next, you are ready to install the cabinet on the wall.
Installation Tips
Measure the distance between the hanging hardware on the cabinet using a measuring tape.
Locate the stud in the wall or joist in the wall where you plan to mount the storage cabinet. Use a stud finder or
tap the wall lightly with a hammer. A solid thud indicates a stud, while a hollow sound means no stud is present.
Mark the storage cabinet hardware measurement on the wall with a pencil. When possible, all bolts used to
mount the storage cabinet should be in a stud.
Drill a pilot hole through the drywall and into the stud at the marked location. Use a drill bit one size smaller than
the mounting screws.
Drill a hole slightly larger than a toggle bolt for any mounting screws that won't be located in the stud. Toggle
bolts have a metal sheath that opens like wings. These wings anchor the screw when no stud is present and can
support loads of 25 pounds or more without damaging the wall.

Product Name:
Bathroom Wall Storage Cabinet in White
SKU #:
WHIF384
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
L
9 ×2
10 ×2
11 ×4
10
911

Product Name:
Bathroom Wall Storage Cabinet in White
SKU #:
WHIF384
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Assembled Cabinet Line Drawing:
19.96〃
5.79〃
5.79〃
5.79〃
5.71〃
20.87〃
9.53〃
7.83
〃
18.11〃