Winsome house WHIF629 User manual

Product Name:
Shutter
-
Door Bathroom Wall Cabinet in White
SKU #:
WH
IF
629
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Thank you for purchasing this Winsome House product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
Hardware:
Tools required for assembly: Philips screwdriver and Flathead Screwdriver (if using power tools, use with care)

Product Name:
Shutter
-
Door Bathroom Wall Cabinet in White
SKU #:
WH
IF
629
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Panels:

Product Name:
Shutter
-
Door Bathroom Wall Cabinet in White
SKU #:
WH
IF
629
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 1
Make sure the pins are installed correctly as shown with the “check mark” below:
Below shows how the pins are used to assemble the panels together.
FIGURE A

Product Name:
Shutter
-
Door Bathroom Wall Cabinet in White
SKU #:
WH
IF
629
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Assemble the top of the cabinet (best to prepare on an open flat (soft) surface):
Insert pins (2) to panel (A, B, and C) as shown in Figure A.
Screw in magnet (5) to panel (A).

Product Name:
Shutter
-
Door Bathroom Wall Cabinet in White
SKU #:
WH
IF
629
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Screw in hardware (10) (6) and knob (8).

Product Name:
Shutter
-
Door Bathroom Wall Cabinet in White
SKU #:
WH
IF
629
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 2
Assemble shelves (B and C) to (J, E and D) with pins (1) as shown below. Lock screw to panel (E). These shelves are
not adjustable.

Product Name:
Shutter
-
Door Bathroom Wall Cabinet in White
SKU #:
WH
IF
629
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 3
Assemble part (12) to both panels of (F). Slide in (F) to (B and C) as shown below.

Product Name:
Shutter
-
Door Bathroom Wall Cabinet in White
SKU #:
WH
IF
629
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 4
Insert pins (1) to panel (A). Assemble top (A) to (B and C) as shown below.

Product Name:
Shutter
-
Door Bathroom Wall Cabinet in White
SKU #:
WH
IF
629
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 5
Align cabnent door (G and H) to panel (B and C) and screw (7) in.

Product Name:
Shutter
-
Door Bathroom Wall Cabinet in White
SKU #:
WH
IF
629
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Step 6
Insert brackets (11) to the side of the cabinet (B and C). To insert shelf (I) into the cabinet, tilt it at angle first to
get it into the cabinet.

Product Name:
Shutter
-
Door Bathroom Wall Cabinet in White
SKU #:
WH
IF
629
Contact: [e-mail]
Instruction Manual
Please save this manual for future reference.
Installation Tips
Measure the distance between the hanging hardware on the cabinet using a measuring tape.
Locate the stud in the wall or joist in the wall where you plan to mount the storage cabinet. Use a stud finder or
tap the wall lightly with a hammer. A solid thud indicates a stud, while a hollow sound means no stud is present.
Mark the storage cabinet hardware measurement on the wall with a pencil. When possible, all bolts used to
mount the storage cabinet should be in a stud.
Drill a pilot hole through the drywall and into the stud at the marked location. Use a drill bit one size smaller than
the mounting screws.
Drill a hole slightly larger than a toggle bolt for any mounting screws that won't be located in the stud. Toggle
bolts have a metal sheath that opens like wings. These wings anchor the screw when no stud is present and can
support loads of 25 pounds or more without damaging the wall.