wiREVO HSH2000 User manual

http://www.wirevo.com
Wireless Revolution

Wireless Revolution
User Manual
ver. HSH200&D1000E-001

Introduction
Guidelines for your safety
Before Using
What’s in the box?
Features at a glance
Putting on the stereo headset
Adjusting the length of necklace
How to plug-in the earphones
How to plug-out the earphones
Charging
Turning ON/OFF
Indicator light status
Pairing & Connecting
Pairing & Connecting between stereo headset and stereo dongle
[Pairing and connecting with the stereo dongle]
[Pairing and connecting with a Bluetooth mobile phone & the stereo dongle simultaneously]
Pairing & Connecting between stereo headset and another device
[Pairing with a Bluetooth device]
[Deleting the paired devices’ information of the stereo headset]
[Connecting with a Bluetooth device]
[Cutting the connection]
Pairing & Connecting between stereo dongle and another stereo headset
[Pairing and connecting stereo dongle with a Bluetooth stereo headset]
[Connecting to the latest connected Bluetooth stereo headset]
[How to change the passkey]
Using the stereo headset
Playing music
Phone call control while listening to music
Answering calls
Making calls
Transferring calls
Adjusting volume
Using the stereo dongle
Analog audio mode
USB audio mode
Specification & Certifications
Brief Specification
Certifications
Table of Contents

Introduction
wiREVO Bluetooth Stereo product series will lead you to the mobility which allows you freedom and without any
limitations and/or disturbances.
main functions of wiREVO HSH200 (Stereo Headset)
Wireless Stereo Headset
Wireless Remote Controller
Wireless Hands-free
Caller ID
main functions of wiREVO D1000 (Stereo Dongle)
Wireless stereo source (A2DP Source)
Wireless remote control (AVRCP Target)
Support both analog audio input and USB audio input
Can change passkey (PIN code)
Can adjust volume level of D1000 (in analog audio mode only)
Read this user manual carefully before using the devices.
Bluetooth Wireless Technology
wiREVO HSH200 and D1000 specially support the following Bluetooth profiles. (Profile is a set of Bluetooth
commands that the devices use to control the other devices)
wiREVO HSH200
Advanced Audio Distribution profile (A2DP)
Audio Video Remote Control profile (AVRCP)
Hands-free profile (HFP)
Headset profile (HSP)
wiREVO D1000
Advanced Audio Distribution profile (A2DP)
Audio Video Remote Control profile (AVRCP)

Limited Liability
The manufacturer, importers, and the dealers are not responsible for any accidental damages; including bodily
injury or any damage resulting from misuse or unsuitable operation by a user. The information on this manual is
prepared with the current products’ specifications. The manufacturer is adding new features to the products and
may persistently apply new technologies hereafter. All standards may be changed at any time without notice.
Introduction

Before use, read the warnings and other information in this manual.
Please check for any information on RF exposure in usage of wiREVO products. When your devices are turned on, they
transmit and receive radio frequency electromagnetic fields in the frequency range 2.402 ~ 2.480 GHz.
Your wiREVO devices are designed to operate in compliance with the RF exposure guidelines and limits that are set
by national authorities and international health agencies when used with any compatible devices.
Drive Safely
Using a mobile phone while driving creates a distraction to the driver which may increase the likelihood of an
accident.When doing the phone call while driving, keep conversations short and do not make notes or read
documents. Before answering calls consider your circumstances. Pull off to the side of road and park before making
or answering calls when driving conditions require (e.g. bad weather, high traffic density, presence of children in the
car, difficult junctions or maneuvers). Remember, driving comes first, not the call! Abide by local laws.
Do not use the stereo headset during charging.
[Stereo Headset & Stereo dongle]
Do not touch your devices and power plug with damp hands.
Do not kink or crease the power cable or place heavy objects on the power cable.
Firmly plug the adapter into the wall socket.
Unplug the adapter during electrical storms.
Do not overload a single power circuit.
Use only the supplied adapter.
Unplug adapter when it is not in use.
Immediately power off the stereo headset & stereo dongle and unplug the adapter if water or other
liquids are present.
Immediately power off the stereo headset & stereo dongle and unplug the adapter if smoke or odors
emits from the stereo headset & stereo dongle or adapter.
Guidelines for your safety
Note
Note

Keep the stereo headset & stereo dongle dry. Humidity and all types of liquids or moisture can cause
harmful interface with electronic circuits.
Do not place heavy object on the devices.
Do not use harsh chemicals, cleaning solvents, water or strong detergents to clean the devices. To clean
external surfaces, use a clean dampened cloth.
Do not use excessive force on the buttons or attempt to disassemble the devices.
Do not drop or subject the devices to impact.
Do not paint the stereo headset & stereo dongle. Paint can clog the moving parts and prevent proper operation.
Keep the stereo headset & stereo dongle away from strong magnets.
Do not disassemble or modify.
Do not dry the devices with heater or microwave.
Keep all accessories out of the reach of small children.
Reduce volume while walking, especially at pedestrian crosswalk.
Do not use earphones at high volume.
Reduce volume or stop using the stereo headset if you experience a ringing in your ears.
Do not use at high volume for continuous listening.
Keep earphone cords/necklace under control to avoid getting caught on various objects.
[Battery]
Your stereo headset & stereo dongle are equipped with a high-performance rechargeable Lithium battery each.
Observe the maintenance guidelines and your battery should give you a long service life.
Use adapter only provided and approved by the manufacturer.
Before using the devices for the first time, charge them fully.
Do not leave the devices as they are turned on when you do not use them. It may cause harmful damage to the
batteries.
The batteries are consumables and will eventually wear out.
Avoid charging in strong heat or extreme cold. Ambient room temperature is preferable. The battery has its optimum
performance at an ambient temperature (+5 ºC to +50 ºC).
Guidelines for your safety

What’s in the box?
User Manual
Stereo headset wiREVO HSH200 Stereo dongle wiREVO D1000 Earphones & Necklace
Earphone Sponges Travel Adapter USB Cable
The contents are subject to change without notice and may vary from image shown.
Before Using

Front
Features at a glance Before Using
[Stereo headset wiREVO HSH200]
Back

Side
Actual Stereo headset may vary slightly from images shown.
Features at a glance Before Using

Features at a glance Before Using
Actual Stereo dongle may vary slightly from images shown.
[Stereo dongle wiREVO D1000]

The necklace is designed to be untied if it is strained for your safety, however you are able to reassemble it.
Putting on the stereo headset Before Using
Adjusting the length of necklace Before Using

1. Hold the connection part of a necklace and push it into the direction of arrow.
2. Hold the connection part and rotate it to the direction of arrow.
How to plug-in the earphones Before Using
How to plug-out the earphones Before Using
1. Hold the connection part and rotate it to the direction of arrow.
2. Hold the connection part of a necklace and pull it out to the direction of arrow.

Charging
Before using the stereo headset & stereo dongle for the first time, make sure they are fully charged.
Do not leave the devices as they are turned on when you do not use them. It may cause harmful damage to the
batteries.
Connect the adapter or USB cable to the stereo headset and the indicator light will light. The indicator light in LCD
will automatically turn off when the battery is fully charged.
[Charging with Adapter]
The indicator light in LCD will automatically turn off when the battery is fully charged.
[Charging with USB Cable]
The indicator light in LCD will automatically turn off when the battery is fully charged.
Do not use the stereo headset while charging.
Before Using
Note
Stereo Headset

[Low battery indication]
When the battery needs to be recharged, the stereo headset will generate high warning tones, which are repeated
every 10 seconds.
On LCD, a warning message “Low Battery!” is displayed.
As soon as you detect the low battery you should charge the headset.
Charge the battery until the indicator turns off.
[Check battery level]
Press and hold Volume Up ( ) button and Volume Down ( ) button together. You can check the battery level on LCD.
[Charging & operation time]
Approx. under 5% charged
Approx. 5~20% charged
Approx. 20~50% charged
Approx. 50~80% charged
Approx. 80~100% charged
Low Battery!
Battery
Battery
Battery
Battery
Charging Time With Adapter With USB cable
2..5 hrs 3hrs
Operation Time Standby Time Talk Time Play Time
150 hrs 12 hrs 8 hrs
Charging
Before Using

Charging
Before Using
Connect the adapter or USB cable to the stereo dongle and the indicator light will be purple.
[Charging]
When the battery is fully charged, the blue indicator light will turn on if power is off, or the indicator light will display normal
operation if power is on.
[Low battery indication]
When the battery needs to be recharged, the red indicator light flashes three times every 10 seconds. While charging,
the purple indicator light will be steady on.
As soon as you detect the low battery you should charge the stereo dongle.
Stereo dongle

Charging
Before Using
Press and hold Volume Up ( ) button and Volume Down ( ) button together.
The red indicator light flashes from 1 to 4 times according to the remaining battery amount.
The more it flashes, the more the battery is remained.
[Check battery level]
[Charging & operation time]
Operation Time Standby Time Play Time
120 hrs 8 hrs
Approx. under 5% charged
Approx. 5~20% charged
Approx. 20~50% charged
Approx. 50~80% charged
Approx. 80~100% charged
Low battery warning
Flashes once
Flashes twice
Flashes three times
Flashes four times
Charging Time With Adapter With USB cable
2..5 hrs 2..5hrs

To turn on the stereo headset, push the power switch ( ) to the direction for ON .
Turning ON/OFF Before Using
To turn off the stereo headset, push the power switch ( ) to the direction for OFF .
To turn on the stereo dongle, push the ON/OFF Switch ( ) to the direction for ‘ON’.
To turn off the stereo dongle, push the ON/OFF Switch ( ) to the direction for ‘OFF’.

Indicator light status
Before Using
Power On as USB audio mode
On pairing state [Pairing mode]
On connecting state [Connecting mode]
When waiting for connection from the peer
Bluetooth device [Connectable mode]
Blue & Purple flash in turn with one another 3 times
Power On as Analog audio mode
Indicator light status of the Stereo dongle
Red & Purple flash in turn with one another 3 times
Blue & Red flash in turn with one another
Blue flashes per 1 second
Blue flashes per 6 seconds
On connected state [Connected mode]
Blue flashes per 3 seconds
While charging Solid purple indicator light is on
Charging is completed Blue indicator light is on (When it’s off) or
normal operation (When it’s on)

Pairing & Connecting
between stereo headset and stereo dongle
Pairing & Connecting
[ Pairing and connecting with the stereo dongle]
1. Turn on the stereo dongle.
If the stereo dongle is used with another Bluetooth stereo headset, turn on the stereo dongle with pressing
Menu ( ) button to be ready for pairing. The blue & red indocator lights flash in turn with one another.
2. Turn on the stereo headset.
If the stereo headset is used with another Bluetooth audio device, turn on the stereo headset with
pressing Talk ( ) button to be ready for pairing. “Search me” & “wiREVO” are displayed in turn
with one another.
3. Put the stereo headset and stereo dongle close-by.
4. When the pairing and connecting are completed, on the LCD of the stereo headset, “Stereo” is displayed
and the stereo dongle’s blue indicator light will flash per 6 seconds.
5. Plug in the stereo dongle to your audio device and enjoy the music. [refer to Using the stereo dongle]
Note
Note