Wireworks Nest Tables User manual

x 1
- clean using a warm soapy
cloth. Do not use abrasive
cleaners as these may
damage the surface finish.
- check stability and strength
of assembled table before
use.
- do not overtighten screws
during assembly.
- do not place hot items on
flat surfaces as they may
damage the surface finish.
- beware ! - some liquids may
stain the laquered finishes
8kg
max
Thank you for buying 'Nest tables'
Assembly instructions.
Please read the instructions and warnings carefully before use to ensure safe and satisfactory
operation of this product. Nest Tables are supplied with screws. You will need a cross head
screwdriver to assemble this item.
x 1
x 1
x 4
x 1
x 1
x 1
x 4
8kg
max
Warnings
x 8
x 8
Fixings:
Round crosshead screw - x16
Tools required:
Crosshead screwdriver
Parts (as marked):

Supplied by Wireworks 43a Mercers Road London N19 4PP.
www.wireworks.co.uk
Assembly instructions.
caution
please use foam packaging
during assembly to prevent
damage to surface finishes.
Fix the legs to the top frame and the bottom frame using supplied screws for each table as shown. Before
fully tightening the screws, put on a flat surface to check alignment.