Wireworks Platform 2 User manual

Shelf parts:
1 - Bottom shelf x1
2 - Support x4
3 - Top shelf x1
Step 1: (unit assembly)
Fit supports 2 to bottom shelf
1 using brass screws A
Step 2:
Fit top shelf 3 to supports 2
using brass screws A
.wireworks
london
Please read the instructions and warnings carefully before use to ensure safe and satisfactory operation of this product.
The wall shelf is supplied with screws and wall plugs suitable for a stone or brick wall. For other wall types (eg. hollow
plasterboard) alternative fixings will be required. If in doubt, consult a qualified professional.
You will need a power drill, a masonary drill bit, a medium cross-head
screwdriver, a spirit level, a ruler / tape measure and pencil to install
this product.
Ensure the wall surface is flat and of suitable strength and construction
before fixing the wall shelf.
Fitted wall shelf view.
Fixings:
A - Brass screws x8
B - Wall plugs x9
C - Wall screws x9
D - Adhesive screw covers x9
A
A
1
2
1
3
A
A
2
3
1
2
Thank you for buying ‘Platform 2 - wall shelf'
Instructions.

Step 3: (wall fixing)
Position the shelf against wall using spirit level to check alignment. Using a pencil
mark the positions for the six wall plug holes. Drill marked holes.
Step 4: (wall fixing)
Push in wall plugs B so they are flush. Hold the shelf up to wall and fix screws C
securely to the wall plugs B . Stick adhesive screw covers D (match grain direction).
B
C
D
B
C
D
Warnings:
Fit in accordance with manufacturers instructions. Wear suitable eye protection when drilling. Beware of hidden pipes
or power cables in the wall.
Avoid contact with water and liquids as this may cause damage to surface finishes.
Maximum load - 20kg per shelf (evenly distributed)
Cleaning:
Wipe using a damp cloth with mild soap solution; do not use abrasive
cleaners as these may damage the surface finish.
Supplied by Wireworks; 4 Gibbs Hill, Headcorn, Ashford, Kent TN27 9UD.
www.wireworks.co.uk
.wireworks
london