Wismec Reuleaux rx2 User manual

reuleaux rx23 custom logo download

Reuleaux RX2/3.

Wismec Reuleaux RX2/3 Box Mod, designed by JayBo, has the unique ability to have a dual or triple battery configuration with replaceable back

cover. The high power output of 150W or 200W is available for your preference. Wismec RX2/3 features a large and clear OLED display screen,

variable temperature control function and upgradeable firmware with custom logo will make your device much attractive and popular. Temperature

Coefficient of Resistance (TCR) mode is also now available for use as well. Moreover, there are multiple fashionable colors for your options.

Parameter.

Size: 40.2*34.5*88.7mm (for 2 cells) 40.2*50.1*88.7mm (for 3 cells) Thread Type: 510 spring loaded thread Cell type: High-rate 18650 cell

(discharging current should be above 25A) Output Mode: VW/TC-Ni/TC-Ti/TC-SS/TCR Mode Output Wattage: 1-150W (for 2 cells)/1-200W

(for 3 cells) Resistance Range: 0.05-1.5ohm for TC modes 0.1-3.5ohm for VW mode Temperature Range: 100-315°C/ 200-600°F (TC modes)

Standard Configuration.

1 * Reuleaux RX2/3(no cells) 1 * Back cover (for 2 cells) 1 * USB Cable 1 * User Manual 1 * Warning Card.

Replaceable Back Cover:

Through the battery back cover lock button, you can replace the back cover for two or three cells to your preference. If you prefer a Wismec

DNA 250 we also have it on sale.

Optional High Power Output:

With two cells, the maximum output power is 150W while the output power reaches 200W with three cells. And the maximum output voltage is

6V and 9V respectively.

Optional High Power Output:

With two cells, the maximum output power is 150W while the output power reaches 200W with three cells. And the maximum output voltage is

6V and 9V respectively.

Reverse Polarity Protection:

Reverse polarity protection can be successfully achieved by the application of special battery anti reverse circuit in the circuit board.

Spring Loaded 510 Connector:

The exquisite stainless steel spring loaded 510 connector makes the device much wear-resisting and adaptable.

Upgradeable Firmware with Custom Logo:

By connecting the device with a computer through the micro USB port, you can download the file to add the custom logo to your Reuleaux RX2/3

and make the device always up-to-date.

Charging:

It is better to take out the cells and charge them through external charger. You can also charge the device by connecting it with a computer or a

wall adapter via USB cable.

Be the first to review this product.

Write Your Own Review.

Only registered users can write reviews. Please, log in or register.

Video Review.

Regular Price: $30.99.

Special Price $19.99.

Get 15% Off on your first order. Sign up for newsletter today.

Address Irvine, CA 92623.

Hours 8:30AM - 5:30PM PST(Mon- Fri)

NOT FOR SALE TO MINORS | Products sold on this site may contain nicotine which is a highly addictive substance. CALIFORNIA

PROPOSITION 65 -  WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to

cause cancer. For more information, go to www.P65Warnings.ca.gov.” Products sold on this site is intended for adult smokers. You must be of

legal smoking age in your territory to purchase products. Please consult your physician before use. E-Liquids on our site may contain Propylene

Glycol and/or Vegetable Glycerin, Nicotine and Flavorings. Our products may be poisonous if orally ingested. Products sold by on this site are not

smoking cessation products and have not been evaluated by the Food and Drug Administration, nor are they intended to treat, prevent or cure any

disease or condition. For their protection, please keep out of reach of children and pets. Read our terms and conditions page before purchasing

our products. USE ALL PRODUCTS ON THIS SITE AT YOUR OWN RISK!

AGE VERIFICATION.

ARE YOU OF LEGAL SMOKING AGE?

Products on this site are intended for sale to people who are of legal smoking age in the state in which you reside. If you are not legally able to

purchase tobacco products in the state where you live, please do not enter this site.

Reuleaux rx2/3 custom logo download.

Predator 228 with Elabo Kit by Wismec, Dual replaceable 18650 cells and with 228W/50A Max Output, 4.9ml E-liquid capacity, upgradeable

firmware.

Wismec Reuleaux RX300.

RX300 supports various modes as well as custom logo and preheat function. In addition to the fashionable colors and changeable stickers for your

preference, the upgradeable firmware also makes it popular and up-to-date.

Reuleaux RX200S.

In addition to the high power output of 200W, the improved 0.96inch OLED screen which presents all parameters more clearly is a bright spot of

the device.

Reuleaux RX200.

Features the use of three removable 18650 batteries and reverse polarity protection.

Presa TC100W.

Not only does the Presa TC100W have magnetic back cover and 0.96inch OLED screen, it also features the application of single 26650 or

18650 cell to your preference.

Presa TC75W.

The optional VW, Bypass, TC-Ni , TC-Ti and TC-SS andmode will provide you with different vaping experiences.

Presa TC40W.

Impressive vapor without dry hits can be produced under TC-Ti/TC-Ni mode while the consumption of electricity and liquid is reduced

substantially.

Reuleaux DNA200.

In addition to the magnetic back cover which matches well with the body, the high power output of 200w will make you own a wonderful vaping

experience.

Tuesday, November 21, 2017.

Wismec Reuleaux RX GEN3 Launches New Colors.

Reuleaux RX GEN3, the third generation of Reuleaux box mod. Wismec launches another four color options for you to choose: Blue/Purple, Mint

Green, Purple/Brown, Brush Stainless.

Wismec Official Authorized Dealer November 22, 2017.

Thursday, November 9, 2017.

Wismec CB-60 With AMOR NS Launched.

We are so glad to introduce you a new vape kit, Wismec CB-60 With AMOR NS full kit.

The Wismec CB-60 full kit is the first designed for high Nicotine and Nic-salts vaper by Jake Barney. Powered by 2300mAh build-in battery, it

can reach a maximum output of 60W. With 2A quick charge, the CB-60 battery can be fully charge quickly. With 0.91 inch OLED screen to

show you the information, and it also features Temperature Protection and Dual Circuit Protection.

The CB-60 full kit comes with a 2ml AMOR NS Tank. Coming with the brand-new WS03 1.5ohm coil head, the AMOR NS Tank is designed

for mouth-to-lung vape. It features detachable structure, top filling and bottom airflow control, all these make it convenient to use.

The CB-60 full kit is available in 5 different colors, included Silver, Green, Black, Purple, Bronze. Which color do you prefer?

Wismec Official Authorized Dealer November 10th, 2017.

Thursday, September 28, 2017.

Wismec Reuleaux RX Machina with Guillotine RDA Launching.

We are so glad to introduce you another wonderful mechanical kit-Reuleaux RX Machina with Guillotine RDA.

After long time waiting, Wismec released its another mechanical kit-Reuleaux RX Machina with Guillotine RDA which turns out to be worthwhile!

Adopting an attractive Honeycomb Resin tube design, it is unuiqe and no doubt a fashion icon! Not only gorgeous in design, Wismec Reuleaux RX

Machina Kit aslo enjoys various functions which make it a must for vapers! Functions including the new button desgin, the application of the

smallest 20700 Mech mod in the market, adaptive battery sleeve, bottom fire button, also a plus, and interchangeable exterior sleeves in attractive

materials and patterns. Besides, the Guillotine RDA is also amazing. Detachable structure without thread connection, newly-introduced Clapton

coil, a easy rebuild deck, all of them makes the Guillotine RDA a top-class vape! There are four colors for your choice: Honeycomb Resin,

Knurled Blackout, Swirled Metallic Resin, White Honeycomb, always a suitable one for you!

For more information, please click http://www.wismec.org/reuleaux-rx-machina-with-guillotine-rda-kit.html.

Wismec™E-cigarette Vape Online Store-Official Authorized September 28th, 2017.

Thursday, September 21, 2017.

How To Extend A 2ml Divider Tank.

Sometimes, you may find it rather annoyed when your e-juice have already been used up however, you do not bring any. At this moment, you may

feel regretted if only you have bought a vape with large e-juice capacity, all would be solved! Needn't get worried now! I'll help you with a single

step, then you can convert your 2ml Divider tank to a 4ml.

Here you only need unplug the silica gel, then your 2ml tank can be extended to 4ml. Sounds incredibly easy. Next time, if your are bring your

Sinuous FJ200 kit out, remember to use the 4ml tank before you leave so that your e-juice won't run out so quickly and you can have a nice

vaping experience!

Wednesday, September 13, 2017.

User Manual For Wismec Sinuous FJ200 Kit.

How to use: 1. Power on/off: Press the fire button 5 times in quick succession, the indicator light will flash 5 times to indicate Sinuous FJ200 Kit is

ready for use. In the same way, it can be turned off after 5 presses. (Note: Please adjust the wattage to a proper range to match the atomizer you

used before using.)

2. Stealth function: While the device is on, simultaneously hold the fire button and the left regulatory button. This will switch the screen display on

and off.

3. Key lock function: While the device is on, simultaneously press the two regulatory buttons. This will switch between Key Lock and Key Unlock

function.

4. Micro USB port function: The USB port can be used for charging and upgrading firmware.

5. Switch the display mode: By pressing the left and right regulatory buttons simultaneously in shutdown state, the screen display will rotate 180

degrees. You can then view the screen from two kinds of angle through this operation.

Shift among VW/TC-Ni/TC-Ti/TC-SS/TCR Mode Press the fire button 3 times to enter into the mode options. Then press the right regulatory

button to switch between VW/TC (Ni, Ti, SS)/TCR (M1, M2, M3) mode. Press the fire button to confirm. Under TC/TCR mode, while the

mode sign flashing, press the left regulatory button to enter into its submenu. Then press the right regulatory button to choose TC-Ni/Ti/SS (TC

mode) or M1/M2/M3(TCR mode). Press the fire button to confirm.

VW Mode: In this mode, output wattage can be adjusted from 1W to 200W by pressing the regulatory buttons, right to increase and left to

decrease.

TC-SS Mode: The TC-SS mode is suitable to SS316 coil.

TCR (M1, M2, M3): In TCR (Temperature Coefficient of Resistance) mode, users can set the parameters according to the TCR of coil.

The Setting of TCR Mode: In powered-off state, keep pressing the fire button and right regulatory button simultaneously, then you enter into the

TCR set menu: (1). Press the left or right regulatory button to choose among TCR M1, M2 and M3; (2). Press the fire button to confirm the mode

you chosen; (3). Press the left or right regulatory button to increase or decrease the parameter according to the TCR of coil; (4). Keep pressing

the fire button or leave the interface for about 10 seconds to confirm. Note: 1. The TCR value in the sheet is 10 5 multiplied of the actual TCR. 2.

The TCR value range is 1-1000. Supplementary TC Modes Functions: Temperature adjustment: In TC modes, the temperature can be adjusted

from (100-315°C or 200-600˚F) with the two regulatory buttons, right to increase and left to decrease.

Shift between °C and ˚F: If you increase the temperature to 315°C, and continue to press the right regulatory button, the temperature readings will

automatically change to the lowest Fahrenheit (200˚F). Equally, if the temperature is decreased below the minimum (100°C), the unit will change

back to ˚F automatically, and the temperature will start to decrease from 600˚F.

Wattage adjustment: While the wattage sign blink, press the right or left regulatory button to adjust the wattage, and press fire button to confirm.

Long pressing the right or left regulatory button will make the wattage setting rapidly increase or decrease.

Resistance locked function: While the resistance sign blink, press the right regulatory button to lock or unlock the resistance of the atomizer. (Note:

Such operation should be carried out at room temperature.)

New atomizer installation: In TC mode, be careful to attach new atomizers that have cooled to room temperature. If a new atomizer has not cooled

down before attaching, the temperature may read and protect incorrectly until the new atomizer cools. Note: 1. When you connect a new atomizer

or disconnect and reconnect your existing atomizer, the device will prompt you to confirm this change and a message will prompt “NEW COIL

RIGHT, SAME COIL LEFT”. Press the right regulatory button to confirm that a new atomizer has been attached. Press the left regulatory button

to confirm that the same atomizer has been reconnected. 2. When using normal coil or the resistance of coil you used is higher than 1.5ohm in TC

modes, the device will automatically switch to VW mode. Shift among Current, Puff and Time: While the user information sign blink, press the right

regulatory button to shift among current, puff and time. The Setting of Preheat Function: (1). When powered on, press the fire button and right

regulatory button simultaneously and then you enter the preheat setting menu. (2). Press the fire button to switch between preheat power and

preheat duration. (3). Press the left or right regulatory button to decrease or increase the parameter. (4). Long press the fire button to confirm.

Adjustable Timeout Duration: Due to different vaping habits, you’re allowed to set the timeout duration from 5 to 15 seconds as you prefer. Press

the fire button and right regulatory button simultaneously to enter into the menu system. Press the right regulatory button to enter the timeout

duration setting. Press the left regulatory button to set the duration and then press the fire button to confirm. Once the duration is set (like 5

seconds), when you hold the fire button and vape over the pre-set time, it’ll display “OVER 5S PROTECT” and shut down automatically. Press

the fire button 5 times to restart. Charging Protection (ENU): While charging, if the temperature of the device is higher than 45℃, it’ll

display“Battery Too Hot”. On the contray, if the temperature is lower than -5℃, it’ll display “Battery Too Cold”. While charging, when the

temperature of the device reaches to 50℃ or higher, the device will stops charging until the temperature drops down to 45℃ or lower.

The Setting of ENU: (1). When powered on, press the fire button and right regulatory button simultaneously and then you enter the menu system.

(2). Press the right regulatory button two times to enter the ENU menu. (3). Press the left regulatory button to shift between “ON” and “OFF”.

(4). Press the fire button to confirm.

How to Reset: If you get stuck while upgrading, just press the right regulatory button and then insert into the reset hole with a needle to restart.

Malfunction Indication and Protection: No Atomizer Alert: When the device does not detect an atomizer, the OLED screen will display “NO

ATOMIZER FOUND” and the indicator light will flash 10 times. Atomizer Low Alert: When the resistance of atomizer is lower than 0.1ohm in

VW mode or lower than 0.05ohm in TC modes, the OLED screen will display “ATOMIZER LOW”.

Atomizer Short-circuit Protection: When atomizer short-circuit occurs, the OLED Screen will display“ATOMIZER SHORT”.

Temperature Alert: If the internal temperature of the device is over 70°C, the output will shut off automatically and the screen will display

“DEVICE TOO HOT”. Temperature Protection: In TC modes, if the actual temperature of coil reaches the set temperature, the device shows

“TEMP PROTECT”.

Weak Battery Alert: In VW/TC mode, when the device installed with an atomizer is working and the voltage of battery is below 2.9V, the device

shows “WEAK BATTERY”. Meanwhile, the output power will be reduced accordingly.

Check USB Alert: When the voltage of the USB charger is equal or greater than 5.8V, the OLED screen will display “CHECK USB ADAPTER”

after inserting the USB cable or vaping.

Charge Error Alert: When no current is detected in charging state, the OLED screen will display “CHARGE ERROR”.

Warranty Please consult with your WISMEC distributors for warranty policy. We are not responsible for any damage caused by user error. This

warranty is only valid for authentic WISMEC products within warranty period from date of purchase by the end user.

Warning 1. Keep out of reach of children. 2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding

women, persons who are allergic/sensitive to nicotine. Contra-indication 1. Only have your product repaired by Wismec. Do not attempt to repair

the unit by yourself as damage or personal injury may occur. 2. Do not leave the product in high temperature or damp conditions, as this may

damage the product. The appropriate operation temperature is within 0°C to 45°C while charging and -10°C to 60°C while in use. 3. Keep away

from water. Possible adverse effects 1. Use of this product may cause damage to health. 2. For people with adverse reaction after using this

product, it is recommended to use the juice with lower nicotine content or no nicotine.

Wismec: kostenlose Logos für Akkuträger.

Hier findest du zurzeit eine noch kleine Auswahl an Logos für deinen Wismec-Akkuträger.

Wismec ist einer der besten Hersteller von Akkuträgern fürs Dampfen. Sie bieten eine gute Leistung für vergleichsweise wenig Geld. Besonders

beliebt ist der Wismec Reuleaux RX200s von Wismec, den wir bereits im Dampfer-ABC beschrieben haben.

Verschönere deinen Wismec-Akkuträger.

Mit den Akkuträgern von Wismec lassen sich problemlos große Dampfwolken produzieren. Der Hersteller ist schließlich dafür bekannt,

leistungsstarke Akkus zu unterstützen. Wer möchte, dass sein Wismec-Akkuträger auch optisch richtig was hermacht, kann sich auf dem Display

verschiedene Logos anzeigen lassen. Wir haben eine Auswahl an Logos für dich zusammengestellt und hoffen, dass sie dir gefallen. Natürlich

arbeiten wir mit Hochdruck daran, dir immer neue und noch coolere Logos zur Verfügung zu stellen.

Kostenlose Logos für Wismec Akkuträger.

Wenn du die Logos nutzen möchtest, solltest du dir deinen Akkuträger vorher genau ansehen. Prüfe bitte, ob der Akku-Träger die Logos auch

tatsächlich anzeigen kann. Du kannst dir die Dateien als komprimierte ZIP-Datei herunterladen und anschließend mit einem Programm wie

WinRAR entpacken.

Die Logos für Wismec-Akkuträger.

Zum Download eines Logos musst du lediglich auf das jeweilige Motiv klicken. Dann taucht unter der Vorschau das Wort „Herunterladen“ auf.

Klicke es an und wähle die Option „Speichern unter“, gebe den Dateipfad an, klicke auf „OK“ und fertig. Ganz unten auf der Seite findest du einen

Link zu unserem ausführlichen Tutorial und zur notwendigen Software!

Wismec Reuleaux RX2/3 Box Mod by Jay Bo Designs.

This item has been Discontinued. Vapor Authority recommends the following alternative products:

RECOMMENDED ALTERNATIVES.

Wismec Reuleaux RX2/3 Box Mod by Jay Bo Designs.

Among the vast range of high-quality vaping hardware that Wismec is notable for, one of their most popular and well-recognized device

assortments is undoubtedly the Reuleaux line of premium MODs. Engineered to exceed the expectations of even the most expert of vapers, this

legendary series of sophisticated devices is aimed to deliver competition-level performance at affordable prices. Wismec has certainly outdone

themselves with the latest in their esteemed collection—the Reuleaux RX2/3 MOD. This masterpiece provides for unparalleled power and

functionality, making it one of the most remarkable MODs on the market today.

In line with all of Wismec's products, the Reuleaux RX2/3 MOD is made with the finest available materials. The body and frame is fabricated with

high-grade aluminum-zinc metal alloy. A unique blend of aluminum, zinc, magnesium, and copper, this material provides for exceptional tensile

strength, durability, and corrosion resistance, while remaining remarkably light in weight. This makes the Reuleaux RX2/3 sturdy and resilient in

order to withstand the rigors of daily use.

The Wismec Reuleaux RX2/3 MOD is powered by either two or three external 18650 batteries (sold separately). Allowing you to determine the

number of batteries to use was a very intelligent decision on the part of Wismec, as you can determine which configuration best suits your needs.

When the RX2/3 is equipped with two batteries, the maximum output is 150W, while three batteries affords you an additional 50W of power for a

maximum total of 200W. This flexibility is fantastic, as those who utilize less than 150W can lessen the size and weight of their Reuleaux RX2/3

MOD.

The ability to remove and replace the device’s batteries also supplies other benefits as well. Due to the fact that all rechargeable batteries will lose

its capacity to hold a charge whatsoever over time, when this inevitability occurs, you can simply discard the exhausted batteries and replace them

with new ones, rather than being forced to purchase an entirely new device. With permanent internal battery devices, on the other hand, when the

battery has exceeded its lifespan, the entire device must be disposed of. Moreover, the capability of easily swapping batteries also affords you the

ability to carry charged spares with you in the event that the ones in use are depleted while you are on the go.

Wismec made battery removal and replacement of the Reuleaux RX2/3 exceptionally effortless with an ingenious lock button. By simply pressing

the small square button located at the bottom of the MOD, the battery cover expeditiously pops off. When the cover is placed back on, it is

securely locked back in place. This locking feature is not only extremely convenient, but also virtually eliminates the chance of the battery cover

coming off while the Reuleaux RX2/3 is being transported in your pocket or bag.

The Wismec Reuleaux RX2/3 MOD is not only an exceptionally sturdy and well-built device, but is also chock-full of cutting-edge features as

well. One of the many great capabilities of the RX2/3 is its variable wattage/voltage capacity. By utilizing the operation buttons located on the face

of the MOD, you can increase or decrease the amount of power the device feeds to the atomizer. In fact, the Wismec Reuleaux RX2/3 can

manufacture wattage as low as 1W and as high as 200W. This immense spectrum of available power permits the RX2/3 to accommodate atomizer

resistances from 0.05 ohms to 3.5 ohms, making it perfect for vapers with all sorts of needs and preferences.

In addition to your ability to control its power output, the Wismec Reuleaux RX2/3 MOD is also equipped with temperature control, sensing, and

limiting capability as well. When coupled with an atomizer containing stainless steel, titanium, or nickel coils, you can regulate the temperature of the

coil itself. You are able to easily manufacture cooler hits by lessening the temperature, or enjoy warmer drags by increasing it. This is not only

beneficial due to customization purposes, but also valuable in its ability to eliminate dry and burnt hits.

The face of the Wismec Reuleaux RX2/3 MOD houses a state-of-the-art OLED screen. This magnificent component clearly and vividly displays

an array of useful information, which makes operating your RX2/3 substantially easier. When the screen is triggered you will be able to monitor the

output wattage, the temperature setting, the amps, the resistance of the atomizer coil, the remaining battery life, the duration of your puff, and any

error messages that may arise while the Reuleaux RX2/3 is being used. This great volume of data at your fingertips makes controlling your device

extraordinarily easy and hassle-free.

In an effort to ensure that your Reuleaux RX2/3 MOD is always kept current, Wismec brilliantly designed it with firmware upgradability. By

connecting the device to your computer, you can easily install the latest firmware as it is released by the manufacturer. This eliminates the need to

upgrade the entire device each time new technologies and updates are available.

As with all of their devices, safety and security was of utmost importance in engineering the Reuleaux RX2/3 MOD. Wismec armed the device

with a plethora of important safety features, including Reverse-Polarity Protection, Over-Discharge Protection, Over-Charge Protection, Low-

Voltage Protection, Low Resistance Protection, and Short-Circuit Protection. These safety features collectively provide you with peace of mind

while utilizing your Reuleaux RX2/3.

Endowed with beauty, brains, and security, the Wismec Reuleaux RX2/3 MOD is designed to please beginner, advanced, and expert vapers alike.

Feature-rich, exceedingly beautiful, and incredibly powerful, the Reuleaux RX2/3 is the perfect choice for anyone in search of a new MOD.

*Note: Batteries Sold Separately.