Wistar T202 User manual

00:00
MO
0 8 0 8:
MO
04 :0 8
MO
L
N
M
K1 K2 K3
1
2
3
4
5
K4
Week
Time
Eight time channels
Timing Open point
/Timing Close point
7 Function Setting.
1)At the initial page state,motor runs
downwards by pressing K1 once,
：Push Button.
01
02)Press K1 again or K4 once,
motor stop running.
01) At the initial page state,motor
runs upwards by pressing K4 once.
02)Press K4 again or K1 once,
motor stop running.
Downwards
Running. BA
01 02 03
04 05 06
0 8 0 0:
WE
0 8 0 0:
WE
— —
：
— —
Su Mo Tu We Th Fr Sa
00 0 0
01 02 03
04 06 05
04:08
MO
0 4 0 8:
MO
01
on
01
on
0 8 0 0:
MO
01
on
0 8 0 0:
MO
01
on
01
on
08 :0 0
MO
0 4 0 8:
MO
0 8 0 0:
08 :0 0
WE
08 :0 0
WE
01
on
Su Mo Tu We Th Fr Sa
00 :0 0
— —
：
— —
01
on
08 :0 0
MO
01
on
0 8 0 0
01
0 4 0 8:
MO
00:00
MO
00 : 0 0
MO
00 : 0 0
MO
00 : 0 0
MO
00 : 0 0
MO
00 : 0 0
MO
00 : 0 0
MO
04 :0 8
MO
08 :0 8
MO
00 :0 0
MO
08 :0 0
MO
0 8 0 0:
MO
2.
Rated: ≤ 400W
The receiver will stop working automatically after working for 4mins continuously.
The motor can be controlled manually by the outer buttons of UP,STOP and DOWN
Receiver enters into power-down mode after running 10 mins without external power supplying, LCD
(Liquid Crystal Display) will go to energy-saving mode after 10 mins,please enter any button to reactivate.
Technique Specifications
Power: AC 220V/50Hz(AC110V/60Hz)
3.Motor Wiring diagram 4.Product appearance
1:
2:
3: Motor netural line(blue)
4:
5:
Motor up/down(black/brown)
Motor down/up(brown/black)
AC power N line(blue)
AC power L line(brown)
AC Power
5.Set Step by Step Function
The motor moves step by step
6.Delete Step by Step Function
01) Keep pressing K3 button 02)Press K1 button together 03)Release K1,K3 simultaneously
The motor moves continuously
8.Time-setting
Initial Page Press K2 to access to hour-setting,
then hour shows blink Press K1 or K4 to adjust hour
Press K2 again to access to minute-setting,
then minute shows blink.
Press K2 again to access to week-setting,
then week shows blink. Press K2 button to go back initial
page after it is finished.
9.Timing setting
Please press K3 when it is in the initial page to access to timing-setting page,the timing mark will be showed in
the Lower-left corner of LCD.You can set time by 8 timing switch separately and make a circle timing setting
among 16 points by pressing K3.
18
18
/
Initial Page Press K3 to access to
timing setting page Press K4 once to change
to time-setting page
Press K3 to cycle these 16 timing points.
Press K2 to set time and details could
follow "8 time setting instruction”
Press K1 button to go back initial
page after it is finished
Instruction:You can set different opening and closing time in one day or keep opening and closing time unchanged
in several days,such as setting same time from Monday to Friday, Monday to Saturday or Monday to Sunday.
1. Keep away from children to avoid any possible damage.
2. If the supply cord is damaged, it must be replaced by the manufacturer, the service agent or
similarly qualified electric
technicians in order to avoid danger.
3.The receiver is of high voltage. Keep it away from water or other extremely wet places.
4.Any technical changes in the products will be showed in our new revision of instruction without further notice.If there is
change of appearance and color between image and actual product, the actual product shall govern.
1.Safety Notes
T202 Instruction
T202 Instruction
U wards
Running.
p
11.03.03.SMS-T202Y-V1
00 : 0 0
MO
00:00
MO
00 : 0 0
MO
01) Keep pressing K3 button 02)Press K4 button together 03)Release K3,K4 simultaneously
At the initial page, long press K2 to enter the time-setting page, Time setting includes hour, minute and week and K2 could be used to
adjust these three parts in a circle.

04 :0 8
MO
:2 8
MO
0 4 0 8:
MO
04 :0 8
MO
04 :0 8
MO
0 8 0 0
04 :0 8
MO
08 :0 0
MO
on
02
01 02
04
03
Short press K2 once to enter
into stopwatch state.
11.Stopwatch Function
01 02 03
:2 8 0 4 0 8:
MO
0 4 0 8:
MO
0 8 0 0:
0 8 0 0:
MO
01
on
0 4 0 8:
MO
— —
：
— —
01
on
0 4 0 8:
MO
01
08 :0 0
MO
01
on
MO
MO
10 Delete timing.
Initial Page Press K3 to access to timing-setting
page and press K4 again to find the
timing which is decided to delete.
Press K4 once to delete the timing. To revert
the deleted timing, press K4 once more.
Press K1 button to go back
initial page after it is finished.
T202 Instruction
T202 Instruction
Initial Page Short press K2 button to go back initial
page after it is finished.
11.03.03.SMS-T202Y-V1