Wiznet WizFi630 User manual

Chipsmall Limited consists of a professional team with an average of over 10 year of expertise in the distribution
of electronic components. Based in Hongkong, we have already established firm and mutual-benefit business
relationships with customers from,Europe,America and south Asia,supplying obsolete and hard-to-find components
to meet their specific needs.
With the principle of “Quality Parts,Customers Priority,Honest Operation,and Considerate Service”,our business
mainly focus on the distribution of electronic components. Line cards we deal with include
Microchip,ALPS,ROHM,Xilinx,Pulse,ON,Everlight and Freescale. Main products comprise
IC,Modules,Potentiometer,IC Socket,Relay,Connector.Our parts cover such applications as commercial,industrial,
and automotives areas.
We are looking forward to setting up business relationship with you and hope to provide you with the best service
and solution. Let us make a better world for our industry!
Contact us
Tel: [phone] Fax: [phone]
Email & Skype: [email protected]om Web: www.chipsmall.com
Address: A1208, Overseas Decoration Building, #122 Zhenhua RD., Futian, Shenzhen, China
  

© Copyright 2012 WIZnet Co., Ltd. All rights reserved. 1
WizFi630 User Manual
(Version 1.1)
© 2012 WIZnet Co., Ltd. All Rights Reserved.
For more information, please visit our website at http://www.wiznet.co.kr

© Copyright 2012 WIZnet Co., Ltd. All rights reserved. 2
Certification Information
CE for Class B ITE
INFORMATION TO THE USER
Hereby, WIZnet. Declares that this WizFi630 is in compliance with the essential requirements and
other relevant provisions of directive 1999/5/EC and other relevant provisions of directive
1999/5/EC.
WARNING: This is a class B product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures
FCC for Class B ITE
INFORMATION TO THE USER
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
Guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made

© Copyright 2012 WIZnet Co., Ltd. All rights reserved. 3
Document Revision History
Date Revision Changes
2012-07-02 1.0 Release
2012-07-17 1.1
Change WizFi630’s picture at P10
Modify error sentence
- P6, P18,P19 : WIZ630wi ÆWizFi630
- P24 : DNS server ÆDNS server address
- P38 : WDS ÆWPS

© Copyright 2012 WIZnet Co., Ltd. All rights reserved. 4
<Contents>
1. Introduction .................................................................................. 6
1.1. Features .............................................................................................................................................. 7
1.2. Wireless Specifications ................................................................................................................. 8
1.3. Hardware Specifications ............................................................................................................... 9
1.4. Software Specifications ............................................................................................................. 10
1.5. EVB Construction ......................................................................................................................... 10
1.5.1. Contents .......................................................................................................................................... 10
1.6. Block Diagram ............................................................................................................................... 12
2. Operation Mode and Description of Menu ......................... 13
2.1. Operation Mode .......................................................................................................................... 13
2.1.1. Access Point .................................................................................................................................. 13
2.1.2. Gateway ........................................................................................................................................... 14
2.1.3. Client (Station) .............................................................................................................................. 14
2.1.4. AP-Client Mode ........................................................................................................................... 15
2.1.5. Ad-hoc Mode ............................................................................................................................... 15
2.2. Menu List by Operation Mode .............................................................................................. 16
2.2.1. Access Point (Bridge) Mode .................................................................................................. 16
2.2.2. Gateway (Router) Mode ........................................................................................................... 17
2.2.3. Client (Station) Mode ................................................................................................................ 18
2.2.4. AP-Client Mode ........................................................................................................................... 19
2.2.5. Ad-hoc Mode ............................................................................................................................... 21
2.3. Internet Setting ............................................................................................................................. 23
2.3.1. Internet connection setting ................................................................................................... 23
2.3.2. Local network setting ............................................................................................................... 25
2.3.3. DHCP Client Information ......................................................................................................... 26
2.3.4. VPN setting .................................................................................................................................... 26
2.3.5. Static Routing Setting .............................................................................................................. 27
2.3.6. QoS(802.1p) Setting ................................................................................................................... 28
2.3.7. VLAN(802.1p) ................................................................................................................................ 29
2.4. Wireless setting ............................................................................................................................ 30
2.4.1. Basic settings ................................................................................................................................ 30
2.4.2. Advanced Wireless Settings .................................................................................................. 32
2.4.3. Wireless Security ......................................................................................................................... 35
2.4.4. WDS(Wireless Distribution System) Setting ..................................................................... 38
2.4.5. WPS Setting
................................................................................................................................... 39
2.4.6. Wireless network status ............................................................................................................ 41
2.4.7. AP Wireless Statistics ................................................................................................................. 42
2.4.8. Station QoS/DLS(Direct Link Setup) Configurations ..................................................... 44
2.4.9. Profile ............................................................................................................................................... 45
2.4.10. Link Status ...................................................................................................................................... 46
2.4.11. Site Survey ..................................................................................................................................... 47
2.4.12. WI-FI Multi-Bridge settings ..................................................................................................... 48
2.5. Serial to LAN(Wired and Wireless) ....................................................................................... 49
2.5.1. Main Connection settings ....................................................................................................... 50

© Copyright 2012 WIZnet Co., Ltd. All rights reserved. 5
2.5.2. Aux Connection Settings ......................................................................................................... 50
2.5.3. Packing Condition (Incoming serial data packing condition) ................................... 51
2.5.4. Ethernet Data Tagging Option .............................................................................................. 51
2.6. Firewall settings ............................................................................................................................ 52
2.6.1. DMZ .................................................................................................................................................. 52
2.6.2. Port forwarding ............................................................................................................................ 53
2.6.3. Packet filtering .............................................................................................................................. 54
2.6.4. Contents filtering ........................................................................................................................ 55
2.6.5. System Security ............................................................................................................................ 56
2.7. Managements ............................................................................................................................... 57
2.7.1. System Management ................................................................................................................. 57
2.7.2. Firmware ......................................................................................................................................... 58
2.7.3. Config Settings ............................................................................................................................ 59
2.7.4. Port Setting .................................................................................................................................... 60
2.7.5. Packet Statistics ............................................................................................................................ 61
2.7.6. System Status ................................................................................................................................ 62
2.7.7. System Log .................................................................................................................................... 63
3. Hardware Information ............................................................. 64
3.1. WizFi630 Pin Map ........................................................................................................................ 64
3.2. Dimensions ..................................................................................................................................... 66
4. Important Notice ...................................................................... 67

© Copyright 2012 WIZnet Co., Ltd. All rights reserved. 6
1. Introduction
WizFi630 is a gateway module that transforms the RS-232 protocol and TCP/IP protocol into
IEEE802.11 b/g/n wireless LAN protocol. WizFi630 enables a device with RS-232 serial interface to
connect to LAN or WLAN for remotely control, measuring, and administration. WizFi630 can also work
as an IP router because of its internally embedded switch.
WizFi630 uses interfaces like Serial(UART), LAN, Wi-Fi(WLAN) to perform functions such as
Serial(UART)-To-Wi-Fi, Serial-To-Ethernet, Ethernet-To-Wi-Fi. Users can connect to WizFi630’s internal
web server or use serial commands for simple Wi-Fi settings; not only serial devices but 8/16/32 bit
micro controllers can also use UART for simple Wi-Fi settings.
WizFi630 can significantly reduce the processes for wireless module design, testing, and certification.
Therefore, WizFi630 can be the best solution for users who lack wireless network experience.
WizFi630 follows the 802.11b/g/n standard and support up to 150Mbps speed in wireless interface.
WizFi630 provides a test board, pc software, and documents so that anyone can develop a wireless
solution.

© Copyright 2012 WIZnet Co., Ltd. All rights reserved. 7
1.1. Features
Complies with IEEE802.11b/g/n.
Gateway/AP(Bridge)/AP-Client/Client(Station)/Ad-hoc Mode , WDS/Repeater supports
1T1R RF Interface
Physical link rate up to 150Mpbs
Built-in 3 Ethernet Ports
2 Serial Ports supports
Working as Wi-Fi Router
WEP 64/128bit, WPA/WPA2-PSK TKIP, AES
802.1x (Only in AP mode)
802.11e and WMM (Wi-Fi Multimedia)
Router and Firewall function supports
Figure 1. Example of WizFi630’s Application

© Copyright 2012 WIZnet Co., Ltd. All rights reserved. 8
1.2. Wireless Specifications
Type Description
Wireless Standard IEEE802.11b/g/n
Frequency Range
USA: 2.400 ~ 2.483GHz
Europe: 2.400 ~ 2.483GHz
Japan: 2.400 ~ 2.497GHz
China: 2.400 ~ 2.483GHz
Operating Channels
USA/Canada: 11(1 ~ 11)
Major Europe Countries: 13(1 ~ 13)
France: 4(10 ~ 13)
Japan: 14 for 802.11b(1 ~ 14), 13 for 802.11g(1 ~ 13)
Korea/China: 13(1 ~ 13)
Output Power
(Tolerance(+/-1dBm)
802.11b: 17dBm@11Mbps
802.11g: 14dBm@54Mbps
802.11n: 14dBm@150Mbps/72Mbps
Receive Sensitivity
802.11b: -89dBm@11Mbps
802.11g: -74dBm@54Mbps
802.11n(40MHz): -66dBm@150Mbps
802.11n(20MHz): -70dBm@72Mbps
Data Rates
802.11b: 1,2,5.5,11Mbps
802.11g: 6,9,12,18,24,36,48,54Mbps
802.11n(20MHz): 7,14.5,21.5,28.5,43.5,57.5,65,72Mbps
802.11n(40MHz): 29.5,86.5,115,130,144,150Mbps
Modulation Type 11g: OFDM(64QAM, 16QAM, QPSK, BPSK)
11b: DSS(CCK, DQPSK, DBPSK)
Antenna u.FL (EVB : 1T1R 2dBi)
Table 1. Wi-Fi Specifications

© Copyright 2012 WIZnet Co., Ltd. All rights reserved. 9
1.3. Hardware Specifications
Type Description
Interface
Serial port : 2 EA
LAN port : 3EA
USB port : 1 USB Host Port ( Reserved )
U.FL(wireless)
Temperature Operation: -10℃~70℃
Humidity Operation: 10% to 90%, Non-Condensing
Storage: 5% to 90%, Non-Condensing
Serial
Baud Rate : 1200 ~ 921,600bps
Stop bits: 1, 2
Parity: None, Odd, Even
Flow Control:
UART1: XON/XOFF(software), CTS/RTS(hardware), none
UART2: XON/XOFF, none
Input Power DC 3.3V / 1A
Power Consumption Max : 3.3V / 600mA
Dimension 33mm X 43mm X 4.5mm
Weight 6g
Tabl e 2. WizFi630 Module Specif icat ions